journal article·2020-02-01Open access

Solidification Microstructure and Magnetic Properties of Ag-Rich Ag–Cu–La–Fe Immiscible Alloys

Takeshi Nagase, Tomoyuki Terai, Tomoyuki Kakeshita, Kenta Morita

MATERIALS TRANSACTIONS· Volume 61· Issue 2

Abstract

The rapid solidification microstructure and magnetic properties of melt-spun ribbons in Ag52Cu23.2La4.8Fe20 (at%) alloy, which was designed as the combination of Ag-rich Ag65Cu29La6 alloy with high glass-forming ability (GFA) and Fe, were investigated. An amorphous phase formation was observed in a melt-spun ribbon of ternary Ag65Cu29La6 alloy. The composite of Ag–Cu-based crystalline matrix and BCC-Fe globules was obtained in Ag52Cu23.2La4.8Fe20 alloy. The size of BCC-Fe globules embedded in an Ag–Cu-based crystalline matrix was on the order of 50 nm. The Fe addition deteriorated the GFA in Ag-rich Ag–Cu–La alloys. The combination of liquid-phase separation and stabilization of liquid for amorphous phase formation during rapid cooling leads to the formation of the particular solidification microstructure in Ag-rich Ag–Cu–La–Fe immiscible alloy. The melt-spun ribbon shows typical ferromagnetic magnetic properties due to the 50-nm BCC-Fe globules.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Center for Ultra-High Voltage Electron Microscopy, Osaka University

Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University

Center for International Affairs, International Education Office, Graduate School of Engineering, Osaka University

Fukui University of Technology

Research Facility Center for Science and Technology, Kobe University

References (31)

Show source-provided references
1. 1) Q. Chen and Z.P. Jin: Metall. Trans. A 26 (1995) 417–426.10.1007/BF02664678 ↗
2. 2) Y. Nakagawa: Acta Metall. 6 (1958) 704–711.10.1016/0001-6160(58)90061-0 ↗
3. 3) I. Yamauchi, T. Irie and H. Sakaguchi: J. Alloy. Compd. 403 (2005) 211–216.10.1016/j.jallcom.2005.05.031 ↗
4. 4) T. Nagase, A. Yokoyama and Y. Umakoshi: Mater. Trans. 47 (2006) 1105–1114.10.2320/matertrans.47.1105 ↗
5. 5) T. Koziel, Z. Kedzierski, A. Zieliska-Lipiec and K. Ziewiec: Scr. Mater. 54 (2006) 1991–1995.10.1016/j.scriptamat.2006.03.019 ↗
6. 6) Binary Alloy Phase Diagrams, 2nd ed., ed. by T.B. Massalski, (ASM International, Materials Park, OH, 1990) Vol. 1, pp. 35–37.
7. 7) T. Nagase and Y. Umakoshi: Intermetallics 18 (2010) 2136–2144.10.1016/j.intermet.2010.06.020 ↗
8. 8) T. Nagase, M. Suzuki and T. Tanaka: J. Alloy. Compd. 619 (2015) 311–318.10.1016/j.jallcom.2014.08.212 ↗
9. 9) T. Nagase, M. Suzuki and T. Tanaka: J. Soc. Mater. Sci. Jpn. 64 (2015) 175–182.10.2472/jsms.64.175 ↗
10. 10) T. Nagase and Y. Umakoshi: J. Alloy. Compd. 495 (2010) L1–L4.10.1016/j.jallcom.2010.01.127 ↗
11. 11) T. Nagase, M. Suzuki and T. Tanaka: Intermetallics 61 (2015) 56–65.10.1016/j.intermet.2015.02.006 ↗
12. 12) T. Nagase, M. Suzuki and T. Tanaka: J. Alloy. Compd. 619 (2015) 332–337.10.1016/j.jallcom.2014.08.138 ↗
13. 13) T. Nagase and Y. Umakoshi: Surf. Interface Anal. 48 (2016) 1252–1255.10.1002/sia.6090 ↗
14. 14) T. Nagase, A. Yokoyama and Y. Umakoshi: J. Alloy. Compd. 494 (2010) 295–300.10.1016/j.jallcom.2010.01.015 ↗
15. 15) T. Nagase, A. Yokoyama and Y. Umakoshi: Scr. Mater. 63 (2010) 1020–1023.10.1016/j.scriptamat.2010.07.037 ↗
16. 16) T. Nagase, M. Suzuki and T. Tanaka: J. Alloy. Compd. 619 (2015) 267–274.10.1016/j.jallcom.2014.08.229 ↗
17. 17) K. Ziewiec, P. Malczewski, R. Gajerski and A. Ziewiec: J. Non-Cryst. Solids 357 (2011) 73–77.10.1016/j.jnoncrysol.2010.10.002 ↗
18. 18) K. Ziewiec, K. Bryla, A. Blachowski, K. Ruebenbauer, K. Prusik, S. Kac and T. Koziel: J. Microscopy 237 (2010) 232–236.10.1111/j.1365-2818.2009.03229.x ↗
19. 19) K. Ziewiec, A. Ziewiec and K. Prusik: J. Achiev. Mater. Manuf. Eng. 37 (2009) 532–537.
20. 20) T. Koziel, Z. Kedzierski, A. Zielinska-Lipiec, J. Latuche and G. Cieslaki: J. Microscopy 237 (2010) 267–270.10.1111/j.1365-2818.2009.03240.x ↗
21. 21) T. Koziel, A. Zielinska-Lipiec, J. Layurh and S. Kac: J. Alloy. Compd. 509 (2011) 4891–4895.10.1016/j.jallcom.2011.01.203 ↗
22. 22) T. Koziel, J. Latuch and A. Zielinska-Lipiec: Arch. Metall. Mater. 58 (2013) 601–605.10.2478/amm-2013-0044 ↗
23. 23) C.-D. Cao, S.-L. Gong, J.-B. Guo, R.-B. Song, Z.-B. Sun, S. Yang and W.-M. Wang: Chin. Phys. B 21 (2012) 086102.
24. 24) T. Nagase, T. Terai, T. Kakeshita, M. Matsumoto and Y. Fujii: Mater. Trans. 60 (2019) 554–560.10.2320/matertrans.Y-M2019803 ↗
25. 25) A. Inoue, J. Park, A. Makino and T. Masumoto: Mater. Trans., JIM 36 (1995) 697–704.10.2320/matertrans1989.36.697 ↗
26. 26) C.W. Bale, A.D. Pelton, W.T. Thompson and G. Eriksson: FactSage, (Ecole Poly-technique, Montreal, 2001) http://www.factsage.com/ (Accessed on 2016.08.10).
27. 27) T. Nagase, M. Matsumoto and Y. Fujii: J. Alloy. Compd. 738 (2018) 440–447.10.1016/j.jallcom.2017.12.138 ↗
28. 28) T. Nagase: Mater. Trans. 57 (2016) 156–162.10.2320/matertrans.F-M2015835 ↗
29. 29) J. He, H. Jiang, S. Chen, J. Zhao and L. Zhao: J. Non-Cryst. Solids 357 (2011) 3561–3564.10.1016/j.jnoncrysol.2011.07.015 ↗
30. 30) K. Ziewiec, A. Bachowski, K. Ruebenbauer, A. Ziewiec, K. Prusik, J. Latuch, M. Zieba and K. Bryla: J. Alloy. Compd. 615 (2014) S29–S34.10.1016/j.jallcom.2013.11.190 ↗
31. 31) T. Nagase, A. Yokoyama and Y. Umakoshi: J. Alloy. Compd. 509 (2011) 1178–1186.10.1016/j.jallcom.2010.09.168 ↗