journal article·2010Open access

Effects of Graphite, SiO2, and Fe2O3 on the Crushing Strength of Direct Reduced Iron from the Carbothermic Reduction of Residual Materials

Hsin-Chien Chuang, Weng-Sing Hwang, Shih-Hsien Liu

MATERIALS TRANSACTIONS· Volume 51· Issue 3

Abstract

The effects of various additives (Fe2O3, SiO2, graphite) on the crushing strength of direct reduced iron (DRI) were investigated. Using a mixture of various residual materials produced in a steel plant, the chemical composition was altered using various additives. The mixture was then agglomerated into a cylindrical pellet and reduced at 1250°C for 15 min. The DRI was then tested for its crushing strength. It was found that adding graphite resulted in more carbon remaining in the DRI. Although the metallization degree of DRI was increased, the crushing strength of DRI decreased due to the presence of discontinuous carbon granules in DRI. Adding SiO2 caused the slag basicity (the ratio between CaO and SiO2) to decrease. The addition of Fe2O3 consumed the carbon content in the pellet, reducing the metallization degree of DRI. The softening and melting temperatures of slag were adjusted by changing the slag basicity and FeO content. A proper amount of Fe2O3 or SiO2 addition increased the crushing strength of DRI due to the softening of slag. Excessive Fe2O3 or SiO2 resulted in the melting of slag, which decreases crushing strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Iron and Steelmaking Processes · Mineral Processing and Grinding · Metal Extraction and Bioleaching

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, National Cheng Kung University

Iron Making Process Development Section, Steel & Aluminum Research & Development Department, China Steel Corporation

References (12)

Show source-provided references
1. 1) L. Çamci, S. Aydin and C. Arslan: Turk. J. Eng. Environ. Sci. 26 (2002) 37–44.
2. 2) B. Anameric and S. K. Kawatra: Miner. Process. Extr. Metal. Rev. 28 (2007) 59–116.10.1080/08827500600835576 ↗
3. 3) I. F. Kurunov, V. N. Titov and O. G. Bol’shakova: Metallurgist 50 (2006) 559–564.10.1007/s11015-006-0122-6 ↗
4. 4) K. Meyer: Pelletizing of Iron Ores, (Springer-Verlag, Berlin, 1980) p. 292.
5. 5) R. C. Gupta and J. P. Gautam: ISIJ Int. 43 (2003) 1913–1918.10.2355/isijinternational.43.1913 ↗
6. 6) R. C. Gupta, J. P. Gautam and S. Mohan: ISIJ Int. 43 (2003) 259–261.10.2355/isijinternational.43.259 ↗
7. 7) C. Takano and M. B. Mourao: ISIJ Int. 41 (2001) S22–S26.10.2355/isijinternational.41.Suppl_S22 ↗
8. 8) V. D. Eisenhüttenleute: Slag Atlas, (Verlag Stahleisen GmbH, Düsseldorf, 1981) p. 84.
9. 9) H. C. Chuang, W. S. Hwang and S. H. Liu: Mater. Trans. 50 (2009) 1448–1456.10.2320/matertrans.MRA2008372 ↗
10. 10) V. D. Eisenhüttenleute: Slag Atlas, (Verlag Stahleisen GmbH, Düsseldorf, 1981) p. 70.
11. 11) V. D. Eisenhüttenleute: Slag Atlas, (Verlag Stahleisen GmbH, Düsseldorf, 1981) p. 68.
12. 12) R. J. Fruehan: Metall. Trans. B 8B (1977) 279–286.10.1007/BF02657657 ↗