journal article·2023-02-01Open access

Detection Method for Shrinkage Cavities Inside Spheroidal Graphite Cast Iron Using Vibration Measurement by Electromagnetic Force Excitation

Shoutarou Niwa, Ami Hagisaka, Ippei Yamada, Sinya Siota, Gao Yanfui, Yuji Gotoh

MATERIALS TRANSACTIONS· Volume 64· Issue 2

Abstract

The inspection of shrinkage cavities formed inside spheroidal graphite cast iron during the manufacturing process of spheroidal graphite cast products, including large cast structures and machine parts, is considered to be important for quality assurance of cast products. X-ray and ultrasonic methods are generally used for this inspection. However, the former inspection method takes a long time and considerable equipment costs, the latter method requires the use of water as a contact couplant and to polish the surface of the inspection site of the cast iron. In an actual manufacturing factory, there is a demand for a simple and quick method for inspecting shrinkage cavities inside cast iron. In this research, as a simple and high-speed inspection method to evaluate shrinkage cavities inside cast iron by measuring of the vibration of the electromagnetic force is proposed. Three-dimensional electromagnetic field analysis using the finite element method and displacement analysis was performed to analyze the phenomenon, and the usefulness of this method was confirmed by verification experiments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate School of Engineering, Oita University

References (12)

Show source-provided references
1. 1) T. Deguchi, T. Matsuo, H. Kim, T. Ikeda and M. Endo: Advanced Exp. Mech. 2 (2017) 87–91. doi:10.11395/aem.2.0_8710.11395/aem.2.0_87 ↗
2. 2) M. Endo and K. Yanase: Theor. Appl. Fract. Mech. 69 (2014) 34–43. doi:10.1016/j.tafmec.2013.12.00510.1016/j.tafmec.2013.12.005 ↗
3. 3) H. Kage: J. JFS 77 (2005) 815–820. doi:10.11279/jfes.77.81510.11279/jfes.77.815 ↗
4. 4) K. Weise, R. Schmidt, M. Carlstedt, M. Ziolkowski, H. Brauer and H. Toepfer: IEEE Trans. Magn. 51(9) (2015) 1–15. doi:10.1109/TMAG.2015.242777310.1109/TMAG.2015.2427773 ↗
5. 5) H. Brauer and M. Ziolkowski: Serbian J. Electr. Eng. 5 (2008) 11–20. doi:10.2298/SJEE0801011B10.2298/SJEE0801011B ↗
6. 6) R. Murayama: Non-Destructive Inspection 58 (2009) 262.
7. 7) N. Takahashi, Three Dimensional Finite Element Method, (The Institute of Electrical Engineers of Japan, 2006) p. 72.
8. 8) K. Muramatsu, N. Takahashi, T. Nakata, M. Nakano and Y. Ejiri: IEEE Trans. Magn. 33 (1997) 1584–1587. doi:10.1109/20.58256910.1109/20.582569 ↗
9. 9) T. Tanaka, N. Takahashi and N. Okamoto: IEEE Trans. Magn. 28 (1992) 1048–1051. doi:10.1109/20.12386110.1109/20.123861 ↗
10. 10) J.M. Otterbach, R. Schmidt, H. Brauer, M. Ziolkowski and H. Topfer: J. Sens. Sens. Syst. 7 (2018) 453–459. doi:10.5194/jsss-7-453-201810.5194/jsss-7-453-2018 ↗
11. 11) Y. Gao, K. Muramatsu, K. Fujiwara, S. Fukuchi and T. Takahata: J. Magn. Soc. Japan 33 (2009) 54–59. doi:10.3379/msjmag.0901RG803210.3379/msjmag.0901RG8032 ↗
12. 12) Y. Gao, K. Muramatsu, M.J. Hatim, K. Fujiwara, Y. Ishihara, S. Fukuchi and T. Takahata: IEEE Trans. Magn. 46 (2010) 2179–2182. doi:10.1109/TMAG.2010.204614410.1109/TMAG.2010.2046144 ↗