Microstructural Changes during Microwave Heating of Ni52.5Zr15Nb10Ti15Pt7.5 Metal Glasses
Source abstract
Abstract
This letter presents microwave sintering of Ni52.5Zr15Nb10Ti15Pt7.5 glassy alloy powder. It was observed that the alloy was heated well in the magnetic field maximum, while it was not heated enough in the electric field maximum. A sintered sample with a glassy structure was obtained at 843 K in an inert atmosphere (Ar).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microwave-Assisted Synthesis and Applications · Intermetallics and Advanced Alloy Properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Environmental Studies, Tohoku University
Institute for Materials Research, Tohoku University
National Institute for Fusion Science
References (21)
Show source-provided references
1. 1) A. Inoue: Mater. Sci. Eng. A304– 306 (2001) 1–10.10.1016/S0921-5093(00)01551-3 ↗
2. 2) A. Inoue: Progress in Materials Science 43 (1998) 365–520.10.1016/S0079-6425(98)00005-X ↗
3. 3) A. Inoue, A. Takeuchi, A. Makino and T. Masumoto: Mater. Trans. JIM 36 (1995) 676–685.10.2320/matertrans1989.36.676 ↗
4. 4) B. Shen, H. Kimura, A. Inoue, M. Omori and A. Okubo: Mater. Trans. 48 (2002) 1961–1965.10.2320/matertrans.43.1961 ↗
5. 5) H. Kato, Y. Kawamura and A. Inoue: Mater. Trans. JIM 37 (1996) 70–77.10.2320/matertrans1989.37.70 ↗
6. 6) A. Inoue and H. M. Kimura: J. Light Metals 1 (2001) 31–41.10.1016/S1471-5317(00)00004-3 ↗
7. 7) F. Komatsu: Waste Management: 10 (1990) 221–215.10.1016/0956-053X(90)90043-K ↗
8. 8) R. M. Anklekar, K. Bauer, D. K. Agrawal and R. Roy: Powder Metall. 48 (2005) 39.10.1179/003258905X37657 ↗
9. 9) R. Roy, R. Peelamedu, L. Hurtt, J. Cheng and D. Agrawal: Mat. Res. Innovat. 6 (2002) 128–140.10.1007/s10019-002-0199-x ↗
10. 10) N. Yoshikawa, E. Ishizuka and S. Taniguchi: Mater. Trans. 47 (2006) 898–902.10.2320/matertrans.47.898 ↗
11. 11) A. Cherradi, G. Desgardin, J. Provost and B. Raveau: Electroceramics IV, R. Wasner, S. Hoffmann, D. Bonnenberg, C. Hoffmann, Eds. (RWTN, Aachen, 1994) vol. II, p.1219.
12. 12) W. H. Sutton: Mater. Res. Soc. Symp. Proc. 269 (1992) 3–20.10.1557/PROC-269-3 ↗
13. 13) R. Roy, D. Agrawal and S. Gedevanishvilli: Nature 399 (1999) 668–670.10.1038/21390 ↗
14. 14) G. Xie, W. Zhang, D. V. Louzguine-Luzgin, H. Kimura and A. Inoue: Scripta Mater. 55 (2006) 687–690.10.1016/j.scriptamat.2006.06.034 ↗
15. 15) T. Kimura, H. Takizawa, K. Ueda and T. Endo: Proc. Int. Conf. Microwave Chemistry, (2000) p.335. Institut National Polytechnique de Toulouse, Toulouse, France.
16. 16) R. Roy, R. Peelamedu, C. Grimes, J. Cheng and D. Agrawal: J. Mater. Res. 17 (2002) 3008–3011.10.1557/JMR.2002.0437 ↗
17. 17) D. V. Louzguine-Luzgin: Intermetallics 13 (2005) 1166–1171.10.1016/j.intermet.2005.03.001 ↗
18. 18) J. L. Wallace: IEEE Trans. Magnetics 29 (1993) 4209–4215.10.1109/20.280862 ↗
19. 19) D. E. Clark, D. C. Foltz and J. K. West: Mater. Sci. Eng. A287 (2000) 153–158.10.1016/S0921-5093(00)00768-1 ↗
20. 20) Y. Chen, N. Yoshikawa and S. Taniguchi: ISIJ Int. 45 (2005) 1232–1237.10.2355/isijinternational.45.1232 ↗
21. 21) K. Morita: Proc. of Int. Symp. on the Microwave Processing in Iron- and Steelmaking, and Environmental Protection, The 19th Committee of JSPS, March (2006), Tokyo, pp. 30–31.