Mechanism of Generation and Growth of Whiskers on Tin Electroplating
Source abstract
Abstract
Generation and growth of whiskers on tin electroplating was studied by scanning electron microscopy and X-ray diffraction. When the surface of the plating, whose thickness was 1 μm, was etched by argon ion beam to remove native oxide scale and kept in a vacuum, whiskers were rarely observed but many nodules were formed. While residual stress of tin plating (1 μm) and the number of whiskers increased with the amount of Cu6Sn5 formed between the tin plating and copper substrate, the 10 μm thickness specimen showed no meaningful change and no whiskers were found. The orientation of whiskers was shown to be identical throughout a crystal by electron backscattering diffraction even when kinked. The mechanism of generation and growth of whiskers is considered to be due to diffusion of tin atoms induced by inhomogeneous strain field, formation of vacancies, and the resulting increase in volume of the grain receiving the tin atoms. Energy change in the growth of whiskers was modelled and calculated, and the main factor determining the growth was found to be the formation enthalpy of a vacancy and the entropy of configuration.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Industrial Technology Research Institute of Okayama Prefectural Government
OM Sangyo Co., Ltd.
Graduate School of Science and Engineering, Ehime University
References (14)
Show source-provided references
1. 1) R. Kawanaka, Y. Fujiwara, K. Tsuji, S. Ito and Y. Ihara: Suzuwisukaseichoupurosesunokaimeitotaisaku, (R&D Planning, 2006) pp. 3.
2. 2) R. Kawanaka, S. Nango, T. Hasegawa and M. Ohtani: J. Jpn. Assoc. for Crystal Growth Coop. 10 (1983) 148–156.
3. 3) B. B. He and K. L. Smith: Proc. Fifth Int. Conf. on Residual Stresses, (ICRS-5, Linkoping, Sweden, 1997) pp. 634–639.
4. 4) B. B. He, U. Preckwinkel and K. L. Smith: Adv. Xray Anal. 42 (1998) 429–438.
5. 5) B. B. He: The 20th ASM Heat Treating Society Conference Proceedings, (St. Louis, Missouri, 2000) pp. 408–417.
6. 6) B. B. He, X. L. Wang, W. Tang and Y. Chao: Proc. 2001 SEM Spring Conf. on Experimental and Applied Mechanics, (Portland, Oregon, USA, 2001) pp. 547–550.
7. 7) T. Heumann and H. Mehrer: Diffusion in Metallen (translated into Japanese), (Springer-Verlag Tokyo, 2005) pp. 299–346.
8. 8) J. D. Meakin and E. Klokholm: Trans. Met. Soc. AIME 218 (1960) 463–466.
9. 9) C. Coston and N. H. Nachtrieb: J. Phys. Chem. 68 (1964) 2219–2229.10.1021/j100790a032 ↗
10. 10) F. H. Huang and H. B. Huntington: Phys. Rev. B 9 (1974) 1479–1488.10.1103/PhysRevB.9.1479 ↗
11. 11) B. F. Dyson, T. R. Anthony and D. Turnbull: J. App. Phys. 38 (1967) 3408.10.1063/1.1710127 ↗
12. 12) M. Takamizawa, T. Naka, M. Hino, K. Murakami, Y. Mitooka and K. Nakai: J. Jpn. Inst. Metals 72 (2008) 229–235.10.2320/jinstmet.72.229 ↗
13. 13) T. Heumann and H. Mehrer: Diffusion in Metallen (translated into Japanese), (Springer-Verlag Tokyo, 2005) pp. 63–82.
14. 14) D. Segers, L. Dorikens-Vanpraet and M. Dorikens: Phys. Stat. Sol. (a) 59 (1980) 543–546.10.1002/pssa.2210590215 ↗