journal article·2002Open access

Polarization Behavior of Bulk Zr-Base Amorphous Alloy Immersed in Cell Culture Medium

Sachiko Hiromoto, An Pang Tsai, Masae Sumita, Takao Hanawa

MATERIALS TRANSACTIONS· Volume 43· Issue 12

Abstract

Effects of amino acids and proteins on polarization behavior of Zr-base amorphous alloy were examined using Hanks’ solution, minimum essential medium (MEM), and cell culture medium (MEM+FBS) consisting with MEM and fetal bovine serum (FBS), respectively. Amorphous powder consolidated Zr55Al10Ni10Cu15 alloy was cathodically and anodically polarized at the beginning of (after 1.8 ks) immersion and after a long-term (605 ks) immersion in each solution. Parameters on the anodic polarization curve; open-circuit potential (Eopen), polarization resistance (Rp), and pitting potential (Epit), were obtained for the examination of corrosion resistance. In the presence of amino acids and proteins, Rp and Epit increased, indicating that resistance to both general and pitting corrosion was raised with those biomolecules. Thus, the adsorbed biomolecules probably work as a diffusion barrier to molecules and ions such as dissolved oxygen and phosphate and chloride ions. During immersion, the surface oxide film grew, leading to the increase in Eopen, average Epit, and Rp although the parameters showed wide variance of deviation probably caused by the defects in alloy structure. The lowest values of Epit after the long-term immersion were not lower than those at the beginning of immersion, indicating that the sensitivity of defects to chloride ion was not enhanced during immersion. However, the pitting corrosion resistance decreased during immersion because the potential difference between Eopen and Epit decreased.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Nuclear Materials and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Institute for Materials Science

References (20)

Show source-provided references
1. 1) S. Hiromoto, A.-P. Tsai, M. Sumita and T. Hanawa: Mater. Trans. 42 (2001) 656–659.10.2320/matertrans.42.656 ↗
2. 2) S. Hiromoto, K. Asami, A.-P. Tsai and T. Hanawa: Mater. Trans. 43 (2002) 261–266.10.2320/matertrans.43.261 ↗
3. 3) A. P. V. A. do Serro, A. C. Fernandes, B. de J. V. Saramago and W. Norde: J. Biomed. Mater. Res. 46 (1999) 376–381.
4. 4) B. A. Ivarsson, P.-O. Hegg, K. I. Lundstrom and U. L. F. Jonsson: Coll. Surf. 13 (1985) 169–192.10.1016/0166-6622(85)80015-9 ↗
5. 5) C. G. F. Clark and D. F. Williams: J. Biomed. Mater. Res. 16 (1982) 125–134.10.1002/jbm.820160205 ↗
6. 6) Y. Mu, T. Kobayashi, M. Sumita, A. Yamamoto and T. Hanawa: J. Biomed. Mater. Res. 49 (2000) 238–243.10.1002/(SICI)1097-4636(200002)49:2<238::AID-JBM12>3.0.CO;2-J ↗
7. 7) N. Bruneel and J. A. Helsen: J. Biomed. Mater. Res. 22 (1988) 203–214.10.1002/jbm.820220305 ↗
8. 8) G. C. F. Clark and D. F. Williams: J. Biomed. Mater. Res. 16 (1982) 125–134.10.1002/jbm.820160205 ↗
9. 9) A. Inoue: Bulk Amorphous Alloys Preparation and Fundamental Characteristics, (Trans Tech Publications, Zuerich, 1994) pp. 27–36.
10. 10) Y. Kawamura, M. Takagi, M. Senoo and T. Imura: Mater. Sci. Eng. 98 (1988) 449–452.10.1016/0025-5416(88)90204-2 ↗
11. 11) Y. Kawamura, T. Masumoto, A. Inoue and T. Imura: Materia Japan 37 (1998) 133–141.10.2320/materia.37.133 ↗
12. 12) M. A. Khan, R. L. Williams and D. F. Williams: Biomaterials 20 (1999) 631–637.10.1016/S0142-9612(98)00217-8 ↗
13. 13) G. Stoner and S. Srinivasan: J. Phys. Chem. 74 (1970) 1088–1094.10.1021/j100700a021 ↗
14. 14) S. Hiromoto, A.-P. Tsai, M. Sumita and T. Hanawa: Corros. Sci. 42 (2000) 2167–2185.10.1016/S0010-938X(00)00043-3 ↗
15. 15) S. Hiromoto, K. Noda and T. Hanawa: Corros. Sci. 44 (2002) 955–965.10.1016/S0010-938X(01)00110-X ↗
16. 16) B. Ivarsson and I. Lundstrom: Critical Rev. Biocompatibility 2 (1986) 1–96.
17. 17) I. Milosev and H. H. Strehblow: J. Biomed. Mater. Res. 52 (2000) 404–412.10.1002/1097-4636(200011)52:2<404::AID-JBM22>3.0.CO;2-Z ↗
18. 18) K. Ueno: Cheletmetric Titration, 10th ed., (Nanko-do, Tokyo, 1964) pp. 31–32.
19. 19) S. Hiromoto: Abstracts of First Japanese-Swiss Joint Workshop on Biomaterials (2001).
20. 20) S. Hiromoto: Function & Materials 22 (2002) 46–52.