Dry Sliding Wear Behavior of A2218/Al3Fe Composites Fabricated by Plasma Synthesis Method
Source abstract
Abstract
The wear behavior of an A2218 alloy and an A2218/Al3Fe composite fabricated by the plasma synthesis method was investigated under dry sliding conditions. The wear tests were carried out at a sliding speed of 0.2 m/s and at the load range of 3–600 N. The variation of wear rate with applied load is composed of two regions for both materials and the two regions belong to mild wear. On the basis of observation and analysis on the worn surface, subsurface and the wear debris, the wear mechanism acting on each region was identified. At low loads, oxidative wear is the main wear mechanism and at high loads, the wear is controlled mainly by delamination and adhesive wear mechanism and oxidative wear is an additional wear mechanism. The A2218/Al3Fe composite exhibits an improved wear resistance at lower loads. On the contrary, at higher loads, due to the presence of the mechanical mixed layer on the worn surface of the A2218 monolithic alloy, both the monolithic alloy and composite exhibit similar wear rate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Engineering, Korea Institute of Machinery and Materials
Department of Metallurgy and Ceramics Science, Tokyo Institute of Technology
References (28)
Show source-provided references
1. 1) D. J. Lloyd: Int. Mater. Revs. 39 (1994) 1–23.10.1179/imr.1994.39.1.1 ↗
2. 2) J. Eliasson and R. Sandstrom: Key Eng. Mater. 104–107 (1995) 3–35.10.4028/www.scientific.net/KEM.104-107.3 ↗
3. 3) D. S. Han, H. Jones and H. V. Atkinson: J. Mater. Sci. 28 (1993) 2654–2658.10.1007/BF00356199 ↗
4. 4) A. S. Kasar, F. Rana and D. M. Stefanescu: Mater. Sci. Eng. A135 (1991) 95–100.10.1016/0921-5093(91)90543-V ↗
5. 5) Y. Watanabe, N. Yamanaka and Y. Fukui: Z. Metallkud. 88 (1997) 717–721.
6. 6) R. P. Baron, C. Jones, F. E. Wawner and J. A. Wert: Mater. Sci. Eng. A259 (1999) 308–313.10.1016/S0921-5093(98)00902-2 ↗
7. 7) C. C. Yang, W. M. Hsu and E. Chang: Mater. Sci. Tech. 13 (1997) 687–694.10.1179/mst.1997.13.8.687 ↗
8. 8) E. Fleury, S. M. Lee, W. T. Kim and D. H. Kim: Met. Mat. 6 (2000) 415–422.10.1007/BF03028129 ↗
9. 9) J. M. Lee, C. G. Lee, S. B. Kang and A. Kamio: Met. Mat. 6 (2000) 389–394.10.1007/BF03028087 ↗
10. 10) A. T. Alpas and J. Zhang: Scr. Metall. Mater. 26 (1992) 505–509.10.1016/0956-716X(92)90638-U ↗
11. 11) J. Zhang and A. T. Zhang: Mater. Sci. Eng. A161 (1993) 273–284.10.1016/0921-5093(93)90522-G ↗
12. 12) A. T. Alpas and J. Zhang: Metall. Mater. Trans. 25A (1994) 969–983.10.1007/BF02652272 ↗
13. 13) M. Narayan, M. K. Surappa and B. N. P. Bai: Wear 181–183 (1995) 563–570.10.1016/0043-1648(94)07083-0 ↗
14. 14) W. Ames and A. T. Alpas: Metall. Mater. Trans. 26A (1995) 85–98.10.1007/BF02669796 ↗
15. 15) B. Venkataraman and G. Sundarajan: Acta Mater. 44 (1996) 451–460.10.1016/1359-6454(95)00217-0 ↗
16. 16) C. S. Oh, Y. G. Lee and H. Y. Ra: J. Kor. Inst. Met. Mater. 37 (1999) 178–185.
17. 17) M. Gui, S. B. Kang and J. M. Lee: J. Mater. Sci. 35 (2000) 4749–4762.10.1023/A:1004862409233 ↗
18. 18) R. Chen, A. Iwabuchi, T. Shimizu, H. S. Shin and H. Mifune: Wear 213 (1997) 175–184.10.1016/S0043-1648(97)00123-3 ↗
19. 19) S. Q. Wu, H. G. Zhu and S. C. Tjong: Metall. Mater. Trans. 30A (1999) 243–248.10.1007/s11661-999-0213-7 ↗
20. 20) K. L. Tee, L. Lu and M. O. Lai: Wear 240 (2000) 59–64.10.1016/S0043-1648(00)00337-9 ↗
21. 21) C. S. Oh, Y. G. Lee and H. Y. Ra: J. Kor. Inst. Met. Mater. 37 (1999) 186–194.
22. 22) X. Y. Li and K. N. Kanton: Wear 245 (2000) 148–161.10.1016/S0043-1648(00)00475-0 ↗
23. 23) J. F. Archard and W. Hirst: Proc. R. Soc. A236 (1956) 397–410.10.1098/rspa.1956.0144 ↗
24. 24) J. Zhang and A. T. Zhang: Acta Mater. 45 (1997) 513–528.10.1016/S1359-6454(96)00191-7 ↗
25. 26) K. C. Ludema: Wear 100 (1984) 315–331.10.1016/0043-1648(84)90019-X ↗
26. 27) R. A. Saravanan, J. M. Lee and S. B. Kang: Metall. Mater. Trans. 30A (1999) 2523–2538.10.1007/s11661-999-0261-z ↗
27. 28) B. Venkataraman and G. Sundarajan: Wear 245 (2000) 22–38.10.1016/S0043-1648(00)00463-4 ↗
28. 29) M. Roy, B. Venkataraman, V. V. Bhanuprasad, Y. R. Mahajan and G. Sundarajan: Metall. Mater. Trans. 23A (1992) 2833–2847.10.1007/BF02651761 ↗