Effects of HIP Treatment on the Microstructure and Properties of Cr35-Si65 Target
Source abstract
Abstract
Hot Isostatic Pressing (HIP) can be used for upgrading castings, densifying pre-sintered components, consolidating powders, and interfacial bonding. Hot pressing is a good method for fabricating on high melting materials with better mechanical properties. Commercial as-hp treated Cr35-Si65 targets are used throughout this study. The aim of this paper is to discuss the methods and to find a suitable HIP treatment for the as-hp treated Cr35-Si65 target. Meanwhile, we also to evaluate the effects of HIP treatment on the microstructure and properties of Cr35-Si65 target. The experiment results show that HIP treatment at 1100°C under 175 MPa for 2 hours of Cr35-Si65 target is the most suitable condition. It can reduce the open pore porosity by 20% and close pore porosity by 30%. The density could be increased to 3.64×10−3 kg/m3.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, National Cheng Kung University
Department of Materials and Mineral Resources Engineering, National Taipei University of Technology
Sustainable Environment Research Center, National Cheng Kung University
References (24)
Show source-provided references
1. 1) W. Arbiter: WADC technical report part I (1953) 53–190.10.1021/cr60165a900 ↗
2. 2) W. Y. Kim, H. Tanaka, A. Kasama, R. Tanaka and S. Hanada: Intermetallics 9 (2001) 521–527.10.1016/S0966-9795(01)00034-6 ↗
3. 3) J. Meng, C. Jia and Q. He: J. Alloy. Comp. 421 (2006) 200–203.10.1016/j.jallcom.2005.09.082 ↗
4. 4) A. Kikitsu, T. Maeda, T. Kai, T. Nagase, J. Akiyama, N. Fujioka and T. Ishigami: IEEE Trans. on Magnet. 39 (2003) 2720–2722.10.1109/TMAG.2003.815574 ↗
5. 5) Yu. N. Taran-Zhovnir: Mat. Sci. Heat Treat. 40 (1998) 210–216.10.1007/BF02467484 ↗
6. 6) J. C. Kuang, C. R. Zhang, X. G. Zhou and S. Q. Wang: Mater. Res. Bull. 39 (2004) 923–931.10.1016/j.materresbull.2004.03.020 ↗
7. 7) M. Naka, M. Maeda, T. Shibayanagi, H. Yuan and H. Mori: Vacuum 65 (2002) 503–507.10.1016/S0042-207X(01)00463-8 ↗
8. 8) P. Wei and X. R. Wan: Surf. Coat. Technol. 132 (2000) 137–142.10.1016/S0257-8972(00)00716-7 ↗
9. 9) H. V. Atkinson and S. Davie: Metall. Mater. Trans. A 31A (2000) 2981–3000.10.1007/s11661-000-0078-2 ↗
10. 10) S. Haro, R. Colas, Abraham Velasco and David Lopez: Mater. Chem. and Phys. 77 (2003) 831–835.10.1016/S0254-0584(02)00156-6 ↗
11. 11) E. Klar: Metals Handbook Ninth Edition Vol. 7 Powder Metallurgy, (American Society for Metals, 1984) pp. 419–443.
12. 12) T. Garvare: Proceedings of the International Conference on HIP-Lulea/15–17 June, (The Swedish Institute of Production Engineering Research, 1987) pp. 3–70.
13. 13) M. Koizumi: Hot Isostatic Pressing Theory and Applications, International Conference on Hot Isostatic Pressing, (Elsevier Applied Science, 1992) pp. 11–187.10.1007/978-94-011-2900-8 ↗
14. 14) Flow Autoclave System, Inc.: Hot Isostatic Pressing Applications (1996).
15. 15) H. Bei, E. P. George and G. M. Pharr: Intermetallics 11 (2003) 283–289.10.1016/S0966-9795(02)00251-0 ↗
16. 16) S. C. Lee, S. H. Chang, T. P. Tang, H. H. Ho and J. K. Chen: Mater. Trans. 47 (2006) 2877–2881.10.2320/matertrans.47.2877 ↗
17. 17) C. H. Tam, S. C. Lee, S. H. Chang, T. P. Tang, H. H. Ho and H. Y. Bor: Mater. Trans. 49 (2008) 382–386.10.2320/matertrans.MER2007166 ↗
18. 18) ASTM C373-88 15.02 (2006).
19. 19) K. Ishizaki: Hot Isostatic Pressing Theory and Applications, International Conference on Hot Isostatic Pressing, ed. by M. Koizumi, (Elsevier Applied Science, 1992), pp. 35–40.10.1007/978-94-011-2900-8_6 ↗
20. 20) K. Ishizaki: Acta. Met. Et Mat. 38 (1990) 2059–2066.10.1016/0956-7151(90)90073-P ↗
21. 21) H. Li and G. S. Selvaduray: Ellingham Diagram Web Project, Dept. of Chem. & Mat. Eng., San Jose State University, http://www.engr.sjsu.edu/ellingham/
22. 22) K. Ishizaki: Hot Isostatic Pressing Theory and Applications, International Conference on Hot Isostatic Pressing, ed. by R. J. Schafer and M. Linzer, (ASM International, Metals Park, Ohio, 1991), pp. 129–138.
23. 23) K. Ishizaki: Euro-Ceramics, Processing of Ceramics, Vol. 1 Ed. by G. de With, R. A. Terpstra and R. Metselaar, (Elsevier Appl. Sci., London and New York, 1989) pp. 314–318.
24. 24) T. B. Massalski (ed): Binary Alloy Phase Diagrams, 2nd Edition, Vol. 3 (Materials Park, OH: ASM International, 1990).