journal article·2001Open access

Fluxless Wetting Properties of Top Surface Metallurgy in Different Pb-Free Solders

Soon-Min Hong, Jae-Yong Park, Jae-Pil Jung, Choon-Sik Kang

MATERIALS TRANSACTIONS· Volume 42· Issue 7

Abstract

The fluxless wetting properties were evaluated for TSM (Top Surface Metallurgy)-coated glass substrate by wetting balance method. The wettability of TSM was estimated with new indices from the wetting curve for one side-coated specimen. For TSM, it was more effective to use Cu as a wetting layer with Au as a protection layer than to use Au as a wetting layer alone. The degree of wetting of Sn–5Sb and Sn–57Bi solder was better than that of Sn–37Pb and Sn–3.5Ag solder. However, the wetting rate of Sn–37Pb solder was higher than those of Pb-free solders. The wetting angle of TSM-coated glass substrate to solders could be calculated from the force balance equation by measuring static state force and tilt angle. The wetting angles of Cr/Cu/Au TSM to Sn–37Pb, Sn–3.5Ag, Sn–5Sb and Sn–57Bi were 69.4°, 67.2°, 60.1° and 53.0°, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Electrical and Thermal Properties of Materials · Optical properties and cooling technologies in crystalline materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Seoul National University

References (12)

Show source-provided references
1. 1) ETRI: High speed/high density multichip module packaging technology development, (Ministry of Information & Communication of Korea, 1999) p. 81.
2. 2) H. Lau ed.: Flip Chip Technologies, (McGraw-Hill, New York, 1995) pp. 123–126.
3. 3) M. Bixenaman and E. Miller: Pro. 5th Int. Joint Symp. on Microelec. and Packaging, IMAPS-KOREA and IEEE-CPMT, Seoul, Korea (2000) pp. 43–55.
4. 4) M. J. Molina and F. S. Rowland: Nature 249 (1974) 810.10.1038/249810a0 ↗
5. 5) R. Strauss: SMT Soldering Handbook, 2nd ed. (Oxford, Boston, 1998) p. 277.10.1016/B978-075063589-9/50005-9 ↗
6. 6) S. M. Hong, J. Y. Park, J. P. Jung and C. S. Kang: Mater. Trans., 42 (2001) 520–527.
7. 7) F. G. Yost, F. M. Hosking and F. M. Frear: The Mechanics of Solder Alloy Wetting and Spreading, (Van Nostrand Reinhold, New York, 1993) pp. 258–262.10.1007/978-1-4684-1440-0_1 ↗
8. 8) R. J. Wassink: Soldering in Electronics, (Electrochemical Publication, Oxen, 1989) pp. 300–330.
9. 9) R. B. Cinique and J. W. Morris Jr.: JEM 23 (1994) 533–539.10.1007/BF02670656 ↗
10. 10) P. G. DeGennes: Rev. Mod. Phys. 57 (1985) 827.10.1103/RevModPhys.57.827 ↗
11. 11) J. Y. Park, S. M. Hong, C. S. Kang and J. P. Jung: J. Kor. Inst. Met. & Mater. 38 (2000) 1553–1558.
12. 12) H. H. Manko: Solders and Soldering, (McGraw-Hill, NY, 1979) p. 313.