journal article·2012

Eutectic Growth in Laser Cladding of Zr-Coating on AZ91D Magnesium Substrate

T. M. Yue, H. Xie, X. Lin, H. O. Yang

MATERIALS TRANSACTIONS· Volume 53· Issue 6
Publisher page

Abstract

Zr-bearing coatings were fabricated on an AZ91D magnesium substrate by means of a two-step method. First, pure zirconium powder was plasma sprayed on the substrate and, subsequently, laser cladding was performed on top of the spray deposited layer. The process led to the formation of a zirconium coating containing zirconia. The coating comprises three layers; on top of the substrate is the plasma sprayed layer, followed by the laser re-melt layer and finally an outermost laser-clad layer. The microstructure and phase of the coating were studied. The results show that rapid solidification occurred in the laser-clad layer and resulted in a directional eutectic cellular and eutectic dendrite growth of (Zr) + ZrO2. The maximum velocity for co-operative lamellar growth of the (Zr) + ZrO2 eutectic and its corresponding lamellae spacing were calculated based on the TMK model.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Advanced Manufacturing Technology Research Centre, Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University

State Key Laboratory of Solidification Processing, Northwestern Polytechnical University

References (17)

Show source-provided references
1. 1) M. P. Staiger, A. M. Pietak, J. Huadmai and G. Dias: Biomaterials 27 (2006) 1728–1734.10.1016/j.biomaterials.2005.10.003 ↗
2. 2) M. Niinomi (ed.): Metals for Biomedical Devices, (Woodhead Publishing Ltd., 2010) pp. 379–404.10.1533/9781845699246.4.379 ↗
3. 3) F. Witte: Acta Biomater. 6 (2010) 1680–1692.10.1016/j.actbio.2010.02.028 ↗
4. 4) A. Lambotte: Bull. Mém. Soc. Nat. Chir. 28 (1932) 1325–1334.
5. 5) M. P. Staiger, A. M. Pietak, J. Huadmai and G. Dias: Biomaterials 27 (2006) 1728–1734.10.1016/j.biomaterials.2005.10.003 ↗
6. 6) F. Witte, F. Feyerabend, P. Maier, J. Fischer, M. Stormer, C. Blawert, W. Dietzel and N. Hort: Biomaterials 28 (2007) 2163–2174.10.1016/j.biomaterials.2006.12.027 ↗
7. 7) B. Heublein, R. Rohde, V. Kaese, M. Niemeyer, W. Hartung and A. Haverich: Heart 89 (2003) 651–656.10.1136/heart.89.6.651 ↗
8. 8) E. Zhang, L. P. Xu and K. Yang: Scr. Mater. 53 (2005) 523–527.10.1016/j.scriptamat.2005.05.009 ↗
9. 9) T. M. Yue and K. J. Huang: Mater. Trans. 52 (2011) 810–813.10.2320/matertrans.M2010274 ↗
10. 10) Y. Tsutsumi, D. Nishimura, H. Doi, N. Nomura and T. Hanawa: Acta Biomater. 6 (2010) 4161–4166.10.1016/j.actbio.2010.05.010 ↗
11. 11) Y. Han, Y. Y. Yan, C. G. Lu, Y. M. Zhang and K. W. Xu: J. Biomed. Mater. Res. Part A 88A (2009) 117–127.10.1002/jbm.a.31859 ↗
12. 12) T. M. Yue, Q. W. Hu, Z. Mei and H. C. Man: Mater. Lett. 47 (2001) 165–170.10.1016/S0167-577X(00)00230-5 ↗
13. 13) C. J. Li and B. Sun: Mater. Lett. 58 (2004) 179–183.10.1016/S0167-577X(03)00441-5 ↗
14. 14) R. Arroyave, L. Kaufman and T. W. Eagar: Calphad 26 (2002) 95–118.10.1016/S0364-5916(02)00027-5 ↗
15. 15) C. Wang, M. Zinkevich and F. Aldinger: Calphad 28 (2004) 281–292.10.1016/j.calphad.2004.09.002 ↗
16. 16) W. Kurz and D. J. Fisher: Fundamentals of solidification, 4th ed., (Trans. Tech. Publications, 1998) pp. 108–110.10.4028/www.scientific.net/RC.35 ↗
17. 17) R. Trivedi, P. Magnin and W. Kurz: Acta Metall. 35 (1987) 971–980.10.1016/0001-6160(87)90176-3 ↗