Formation of Inter-Diffusion Layer between NiCrAlY Coating and Nb Substrate during Vacuum Heat-Treatment
Source abstract
Abstract
The formation of the inter-diffusion layer between NiCrAlY coating and Nb substrate during vacuum heat treatment was investigated. A NiCrAlY coating was applied on Nb substrate by cathode arc deposition. Vacuum heat treatments were carried out at 800, 900, and 1000°C for 2 h. SEM, EPMA, EDS, and XRD were performed to analyze the microstructure of the inter-diffusion layer and the results were interpreted using the 1002°C isothermal ternary Nb-Ni-Cr phase diagram. It was found that at 800°C the inter-diffusion layer has a single NbNi3 layer; at 900°C the inter-diffusion layer consists of an outer NbNi3 layer, a thin intermediate NbCr2(HT) layer, and an inner Nb7Ni6 layer; at 1000°C the inter-diffusion layer has three well-developed layers of an outer NbNi3 layer, an inner Nb7Ni6 layer, and an intermediate layers comprising NbCr2(HT) and NbNi3. A small amount of Cr exists in both the NbNi3 and the Nb7Ni6 phases as solid solution, and a large amount of Ni in the NbCr2(HT) phase as solid solution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Engineering, Hokkaido University of Science
Hokkaido University
National Research Council of Canada
References (13)
Show source-provided references
1. 1) B. Gleeson: J. Propul. Power 22 (2006) 375–383.10.2514/1.20734 ↗
2. 2) M. Hetmanczyk, L. Swadzba and B. Mendala: J. Achievem. Mater. Manufact. Eng. 24 (2007) 372–381.
3. 3) A. Sato, Y. Aoki, M. Arai and H. Harada: J. Japan Inst. Metals 71 (2007) 320–325.10.2320/jinstmet.71.320 ↗
4. 4) J. Doychak and M. G. Hebsu: Oxid. Met. 36 (1991) 113–141.10.1007/BF00938458 ↗
5. 5) M. Fujikura, A. Kasama, R. Tanaka and S. Hanada: Mater. Trans. 45 (2004) 493–501.10.2320/matertrans.45.493 ↗
6. 6) S. Miura, Y. Murasato, Y. Sekito, Y. Tsutsumi, K. Ohkubo, Y. Kimura, Y. Mishima and T. Mohri: Mater. Sci. Eng. A 510–511 (2009) 317–321.10.1016/j.msea.2008.04.123 ↗
7. 7) S. PalDey, S. C. Deevi and T. L. Alford: Intermetallics 12 (2004) 985–991.10.1016/j.intermet.2004.02.021 ↗
8. 8) A. N. Kale, K. Ravindranath, D. C. Kothari and P. M. Raole: Surf. Coat. Technol. 145 (2001) 60–70.10.1016/S0257-8972(01)01296-8 ↗
9. 9) S. Saito, T. Takashima, K. Miyama, T. Narita, T. Nagata, I. Masuda and K. Kajiwara: J. Japan Inst. Met. Mater. 77 (2013) 424–429.10.2320/jinstmet.J2013025 ↗
10. 10) Y. Kitajima, S. Hayashi and T. Narita: Mater. Sci. Forum 522–523 (2006) 103–110.10.4028/www.scientific.net/MSF.522-523.103 ↗
11. 11) Y. Du, S. Liu, Y. A. Chang and Y. Yang: CALPHAD 29 (2005) 140–148.10.1016/j.calphad.2005.06.001 ↗
12. 12) M. Venkatraman and J. P. Neumann: Bull. Alloy Phase Diagrams 7 (1986) 462–466.10.1007/BF02867811 ↗
13. 13) H. Okamoto: Phase Diagrams for Binary Alloys, 2, (ASM In., 2010) p. 285.