journal article·2021-07-01Open access

Magnetic Properties and Particle Flowability of Neodymium Magnetic Granules

Yasushi Enokido, Fumitaka Baba, Yoshitaka Kitamoto

MATERIALS TRANSACTIONS· Volume 62· Issue 7

Abstract

In this study, sintered Nd–Fe–B magnets with high residual flux densities and magnetic coercivities were manufactured by filling a die cavity with granulated Nd–Fe–B magnetic powder during pressing. In the binder-bound granules prepared by a spray drying method, the bonding force between the primary particles was relatively strong. However, the magnets obtained from these granules could not achieve high residual magnetic flux densities because it was difficult to align each particle in these granules along the magnetization easy axis through magnetic field pressing. Therefore, a weak liquid bridge force was utilized for particle binding. After preparing the liquid-bound granules containing 0.25 mass% terpineol, which does not evaporate easily at room temperature (∼293 K) but undergoes debinding on baking, the angle of repose of the magnetic powder (representing its flowability index) decreased from 63° to 44.2°, while the deterioration of its magnetic properties was considerably suppressed. As a result, the residual magnetic flux density of the sintered magnet was equal to 99.3% of the value obtained for the non-granulated powder. In addition, the liquid-bound granules exhibited high filling rates and low weight variations, demonstrating their applicability for mass production.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties of Alloys · Metallic Glasses and Amorphous Alloys · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Research Center, Technology and Intellectual Property HQ, TDK Corporation

Magnet Products Business Group, TDK Corporation

Department of Materials Science and Engineering, Tokyo Institute of Technology

References (26)

Show source-provided references
1. 1) M. Sagawa, S. Fujimura, H. Yamamoto, Y. Matsuura and K. Hiraga: IEEE Trans. Magn. 20 (1984) 1584–1589.10.1109/TMAG.1984.1063214 ↗
2. 2) M. Sagawa, S. Hirosawa, H. Yamamoto and Y. Matsuura: Jpn. J. Appl. Phys. 26 (1987) 785–800.10.1143/JJAP.26.785 ↗
3. 3) M. Müller, D. Schweizer and V. Seiler: J. Bus. Ethics 138 (2016) 627–648.10.1007/s10551-015-2773-3 ↗
4. 4) D. Brown, B.-M. Ma and Z. Chen: J. Magn. Magn. Mater. 248 (2002) 432–440.10.1016/S0304-8853(02)00334-7 ↗
5. 5) H. Tokoro and K. Uchida: IEEE Trans. Magn. 37 (2001) 2463–2466.10.1109/20.951204 ↗
6. 6) D. Hinz, A. Kirchner, D.N. Brown, B.-M. Ma and O. Gutfleisch: J. Mater. Process. Technol. 135 (2003) 358–365.10.1016/S0924-0136(02)00868-3 ↗
7. 7) T. Hartwig, L. Lopes, P. Wendhausen and N. Unal: EPJ Web of Conferences 75 (2014) 04002.10.1051/epjconf/20147504002 ↗
8. 8) L. Li, B. Post, V. Kunc, A.M. Elliott and M.P. Paranthaman: Scr. Mater. 135 (2017) 100–104.10.1016/j.scriptamat.2016.12.035 ↗
9. 9) M. Sagawa and H. Nagata: IEEE Trans. Magn. 29 (1993) 2747–2751.10.1109/20.280924 ↗
10. 10) H. Kotera, F. Tsumori, I. Iritani, T. Watanabe and S. Shima: Int. J. Powder Metallurg. 40 (2004) 33–40.
11. 11) F.C. Franklin and L.N. Johanson: Chem. Eng. Sci. 4 (1955) 119–129.10.1016/0009-2509(55)80003-6 ↗
12. 12) O. Yamashita and Y. Kishimoto: J. Jpn. Soc. Powder Powder Metall. 43 (1996) 249–255.10.2497/jjspm.43.249 ↗
13. 13) O. Yamashita and Y. Kishimoto: J. Jpn. Soc. Powder Powder Metall. 43 (1996) 675–681.10.2497/jjspm.43.675 ↗
14. 14) Y. Kishimoto and O. Yamashita: J. Jpn. Soc. Powder Powder Metall. 44 (1997) 775–780.10.2497/jjspm.44.775 ↗
15. 15) Y. Kishimoto and O. Yamashita: J. Jpn. Soc. Powder Powder Metall. 44 (1997) 951–957.10.2497/jjspm.44.951 ↗
16. 16) Y. Kishimoto and O. Yamashita: J. Jpn. Soc. Powder Powder Metall. 45 (1998) 373–378.10.2497/jjspm.45.373 ↗
17. 17) K. Makita, Y. Kishimoto and O. Yamashita: J. Jpn. Soc. Powder Powder Metall. 45 (1998) 646–651.10.2497/jjspm.45.646 ↗
18. 18) R.L. Carr: Chem. Eng. 72 (1965) 163–168.10.1001/archopht.1965.00970040165007 ↗
19. 19) T. Minowa, M. Shimano and M. Honshima: J. Magn. Magn. Mater. 97 (1991) 107–111.10.1016/0304-8853(91)90167-9 ↗
20. 20) K. Hono and H. Sepehri-Amin: Scr. Mater. 67 (2012) 530–535.10.1016/j.scriptamat.2012.06.038 ↗
21. 21) Y. Enokido, M. Miwa, S. Goto and Y. Fujikawa: Mater. Trans. 57 (2016) 1960–1965.10.2320/matertrans.M2016160 ↗
22. 22) Y. Sun, R.W. Gao, G.B. Han, G. Bai, T. Liu and B. Wang: J. Magn. Magn. Mater. 299 (2006) 82–86.10.1016/j.jmmm.2005.03.086 ↗
23. 23) G. Lian, C. Thornton and M.J. Adams: J. Colloid Interface Sci. 161 (1993) 138–147.10.1006/jcis.1993.1452 ↗
24. 24) Y.I. Rabinovich, M.S. Esayanur and B.M. Boudgil: Langmuir 21 (2005) 10992–10997.10.1021/la0517639 ↗
25. 25) C.E. Capes, R.J. Germain and R.D. Coleman: Ind. Eng. Chem. Process Des. Dev. 16 (1977) 517–518.10.1021/i260064a014 ↗
26. 26) A. Goldszal and J. Bousquet: Powder Technol. 117 (2001) 221–231.10.1016/S0032-5910(00)00369-7 ↗