High yield spray forming of small diameter tubes using pressure‐gas‐atomization
Source abstract
Abstract
The economy of the spray forming process is restricted by the generation of overspray, which in many cases cannot be re‐introduced into the process by re‐melting or co‐injection. Especially for small deposits, such as small diameter tubes (diameter <100 mm), the amount of overspray can become large in conventional spray‐forming processes. In this work, an alternative process with a pressure‐gas‐atomizer operating at low melt flows is presented. Tubes with diameters of 50 mm and 90 mm were spray‐formed and analyzed regarding yield and porosity. It was found that yields up to 96% can be achieved with porosities below 1% if proper process parameters are identified and used. An evaluation of the yield and the corresponding achievable porosity is conducted to identify resource‐efficient sets of parameters.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Plant Surface Properties and Treatments · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. 10.1016/0079-6425(95)00004-610.1016/0079-6425(95)00004-6 ↗
2. Schneider A. · Mat. Sci. Eng. A · 2004 · 383 · 11410.1016/j.msea.2004.02.038 ↗
3. Fritsching U. · 200410.1017/CBO9780511536649 ↗
4. Lin Y. · Met. Mat. Trans. A · 2000 · 31 · 291710.1007/BF02830347 ↗
5. V.Uhlenwinkel K.Bauckhage presented at Second International Conference on Spray Forming Swansea UK 1993 25–34.
6. Meyer C. · Int. J. Mater. Res · 2012
7. Buchholz M. · 1999
8. 10.1016/j.msea.2004.02.05910.1016/j.msea.2004.02.059 ↗
9. K.McHugh V.Uhlenwinkel N.Ellendt presented at PM2008 8.–12. June2008.
10. V.Uhlenwinkel N.Ellendt presented at PM 2006 September 24–September 28 2006 Busan South Korea pp.429–432.10.4028/0-87849-419-7.429 ↗
11. M.Walter M.Stockinger J.Tockner N.Ellendt V.Uhlenwinkel presented at 6th International Symposium on Superalloys 718 625 706 and Derivatives October 2 2005–October 5 2005 Minerals Metals and Materials Society Pittsburgh PA United states 2005 pp. 429–440.10.7449/2005/Superalloys_2005_429_440 ↗
12. 10.1016/j.ijheatmasstransfer.2006.10.02210.1016/j.ijheatmasstransfer.2006.10.022 ↗
13. D.Schwenck N.Ellendt J.Fischer‐Bühner P.Hofmann L.Mädler V.Uhlenwinkel presented at SDMA 2013 Bremen Germany 2013.
14. 10.1038/nmeth.208910.1038/nmeth.2089 ↗
15. 10.1016/j.msea.2004.02.06010.1016/j.msea.2004.02.060 ↗