Response to Discussion of “Formation of an Intermediate Layer Between Grains in Nickel-Based Superalloy Turbine Blades”
Source abstract
Abstract
A [1] and also our thanks go to the editors of the journal for allowing a response to be made to the points raised.Professor Campbell's work on oxide bi-films in castings is well known and the authors understand the implications for castings in general and nickel based superalloys in particular.In the case of the grain boundary defects in the aforementioned paper the authors feel that the grain defects are not caused by these bi-films and their arguments can be categorized into two groups.Firstly there is no evidence of the oxide film in any of the sections of grain boundaries investigated.Professor Campbell identifies Figure 8(b) in the paper as giving indications of the bi-film, however, this is contrast due to the edge effect in the SEM near the interface and most of all, it was confirmed at high magnification and resolution that there was no oxide.In addition, as the
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Power Generation Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (5)
Show source-provided references
1. K. Kim, P.A. Withey: Metall. Mater. Trans., 2017, vol. 48A, pp. 2932–42.10.1007/s11661-017-4044-7 ↗
2. K. Kim, S. Kuroda: Scripta Mater., 2010, vol. 63, pp. 215–18.10.1016/j.scriptamat.2010.03.061 ↗
3. K. Kim, M. Watanabe, K. Mitsuishi, K. Lakoubovskii, S. Kuroda: J. Phys. D: Appl. Phys., 2009, vol. 42, p. 065304.10.1088/0022-3727/42/6/065304 ↗
4. K. Kim, P.A. Withey, W.D. Griffiths: Metall. Mater. Trans., 2015, vol. 46A, pp. 1024–29.10.1007/s11661-014-2709-z ↗
5. K. Kim, P.A. Withey: Mater. Trans., 2016, vol. 57, pp. 1698–06.10.2320/matertrans.M2016131 ↗