Effects of prehafnizing on morphological development of a chemical vapor deposition aluminide coating formed on single-crystal Ni-based superalloy
Source abstract
Abstract
We examined a sequential Hf doping procedure, which consisted of (1) “prehafnizing” the surface of a single-crystal Ni-based superalloy (RENE N5) with HfCl4 and H2, and (2) aluminizing with AlCl3 and H2, as a means of incorporating Hf as a dopant in the aluminide coating matrix. The prehafnized layer on RENE N5 substrate significantly altered the growth behavior and therefore the morphology of the resulting aluminide coating. With the prehafnizing step, the coating layer became much thinner with a significant amount of Hf incorporated as Hf-rich phases (Hf2Ni7, Hf3Ni7, and/or Hf8Ni21). However, the Hf-rich phases segregated to the coating surface and retarded the inward Al diffusion required to form the β-NiAl coating matrix. The sequential Hf doping procedure provided a mechanism to incorporate a significant amount of Hf in the coating, but did not produce a uniform distribution of Hf as a dopant. The results were compared to those observed for a continuous doping procedure that was previously studied, and were discussed in the context of understanding the limitations of these procedures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. B. Nagaraj: U.S. Patent 5,427,866, 1995.
2. W.Y. Lee, Y. Zhang, I.G. Wright, B.A. Pint, and P.K. Liaw: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 833–41.10.1007/s11661-998-0274-z ↗
3. Y. Zhang, W.Y. Lee, J.A. Haynes, I.G. Wright, B.A. Pint, K.M. Cooley, and P.K. Liaw: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2679–687.10.1007/s11661-999-0308-1 ↗
4. J.A. Haynes, Y. Zhang, W.Y. Lee, B.A. Pint, I.G. Wright, and K.M. Cooley: in Elevated Temperature Coatings: Science and Technology III, J.M. Hampikian and N.B. Dahotre, eds., TMS, Warrendale, PA, 1999, pp. 185–96.
5. G.Y. Kim, W.Y. Lee, J.A. Haynes, and T.R. Watkins: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 615–24.10.1007/s11661-001-0078-x ↗
6. W.Y. Lee and G.Y. Kim: in Elevated Temperature Coatings: Science and Technology III, J.M. Hampikian and N.B. Dahotre, eds., TMS, Warrendale, PA, 1999, pp. 149–60.
7. A.W. Funkenbusch, J.G. Smeggil, and N.S. Bornstein: Metall. Trans. A, 1985, vol. 16A, pp. 1164–66.10.1007/BF02811687 ↗
8. D.K. Gupta: U.S. Patent 4,933,329, 1990.
9. B.A. Pint: Oxid. Met., 1996, vol. 45, pp. 1–37.10.1007/BF01046818 ↗
10. B.A. Pint, I.G. Wright, W.Y. Lee, Y. Zhang, K. Prüβner, and K.B. Alexander: Mater. Sci. Eng., 1998, vol. A245, pp. 201–11.10.1016/S0921-5093(97)00851-4 ↗
11. R. Bianco and R.A. Rapp: J. Electrochem. Soc., 1993, vol. 140, pp. 1181–90.10.1149/1.2056219 ↗
12. D.C. Tu, C.C. Lin, S.J. Liao, and J.C. Chou: J. Vac. Sci. Technol., 1986, vol. A4, pp. 2601–06.
13. R. Prescott and M.J. Graham: Oxid. Met., 1992, vol. 38 (3–4), pp. 233–54.10.1007/BF00666913 ↗
14. G.Y. Kim, L.M. He, J.D. Meyer, A. Quintero, and W.Y. Lee: Metall. Mater. Trans. A, in press.
15. G.Y. Kim, L.M. He, J.D. Meyer, and W.Y. Lee: in Surface Engineering in Materials Science I, S. Seal, N.B. Dahotre, J.J. Moore, and B. Mishra, eds., TMS, Warrendale, PA, 2000, pp. 69–78.
16. L.M. He, K. Putyera, J.D. Meyer, L.R. Walker, and W.Y. Lee: Metall. Mater. Trans. A, in press.
17. R.E. Read-Hill and R. Abbaschian: Physical Metallurgy Principles, 3rd ed., Boston, MA, PWS Pub. Co., 1994, pp. 190–192.
18. J.D. Whittenberger, I.E. Locci, R. Darolia, and R. Bowman: Mater. Sci. Eng., 1999, vol. A268, pp. 165–83.10.1016/S0921-5093(99)00071-4 ↗
19. K. Oh-ishi, Z. Horita, and M. Nemeto: Mater. Sci. Eng., 1997, vols. A239–240, pp. 472–78.10.1016/S0921-5093(97)00619-9 ↗
20. I.E. Locci, R.M. Dickerson, A. Garg, R.D. Noebe, J.D. Whittenberger, M.V. Nathal, and R. Darolia: J. Mater. Res., 1996, vol. 11, pp. 3024–38.10.1557/JMR.1996.0384 ↗
21. R. Pichoir: in Materials and Coatings to Resist High Temperature Corrosion, D.R. Holmes and A. Rahmel, eds., Applied Science Publishers Ltd., London, 1978, pp. 271–91.