Tertiary compression creep of long-fiber composites: A model for fiber kinking and buckling
Source abstract
Abstract
The uniaxial compression-creep behavior of unidirectionally reinforced continuous-fiber composite materials was investigated for the case where both the matrix and the fiber underwent plastic deformation by creep. The creep behavior of NiAl composites reinforced with 5 to 20 vol pct tungsten fibers was characterized at 1025 °C. The NiAl-W composites exhibited a three-stage creep behavior, with distinct primary, secondary, and tertiary creep. Microstructurally, tertiary creep was characterized by one of the following fiber-deformation mechanisms: brooming, bulging, buckling, or kinking. The composite tertiary creep is modeled by solving for global or local kink-band evolution, with composite deformation contributing, respectively, to fiber buckling or kinking. The model predicts (1) the critical strain for the onset of the tertiary stage to be most sensitive to the initial kink angles, while being relatively insensitive to the initial kink-band heights and (2) the critical strain to vary inversely with the volume fraction of fiber in the composite. Reasonable agreement between model predictions and experiments is obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. K.K. Chawla: Composite Materials, Springer-Verlag, New York, NY, 1987.10.1007/978-1-4757-3912-1 ↗
2. B.W. Rosen: Fiber Composite Materials, ASM, Metals Park, OH, 1965, pp. 37–75.
3. A.S. Argon: in Treatise on Materials Science and Technology, H. Herman, ed., Academic Press, New York, NY, 1972, pp. 79–114.
4. B. Budiansky and N.A. Fleck: J. Mech. Phys. Solids, 1993, vol. 41, pp. 183–211.10.1016/0022-5096(93)90068-Q ↗
5. C.R. Schultheisz and A.M. Waas: Prog. Aerospace Sci., 1996, vol. 32, pp. 1–42.10.1016/0376-0421(94)00002-3 ↗
6. A.M. Waas and C.R. Schultheisz: Prog. Aerospace Sci., 1996, vol. 32, pp. 43–78.10.1016/0376-0421(94)00003-4 ↗
7. M. McLean: Mechanical Behavior of In-Situ Composites, The Metals Society, London, 1983, pp. 207–56.
8. W.S. Slaughter, N.A. Fleck, and B. Budiansky: Trans. ASME-J. Eng. Mater. Technol., 1993, vol. 115, pp. 308–13.10.1115/1.2904223 ↗
9. R.R. Bowman: in Intermetallic Matrix Composites II, D.B. Miracle, D.L. Anton, and J.A. Graves, eds., Materials Research Society, Pittsburgh, PA, 1992, pp. 145–55.
10. D. Proulx and F. Durant: in Failure Modes in Composites II, J.N. Fleck and R.L. Mehan, eds., TMS-AIME, New York, NY, 1974, pp. 188–96.
11. D.E. Alman and N.S. Stoloff: Scripta Mater., 1993, vol. 30, pp. 203–08.10.1016/0956-716X(94)90040-X ↗
12. C.H. Weber, K.T. Kim, F.E. Heredia, and A.G. Evans: Mater. Sci. Eng., 1995, vol. 196, pp. 25–31.10.1016/0921-5093(94)09718-6 ↗
13. D.H. Nguyen and A.A. Ogale: J. Thermal Comp. Matter., 1991, vol.4, pp.83–99.10.1177/089270579100400106 ↗
14. T.A. Venkatesh: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1998.
15. T.A. Venkatesh and D.C. Dunand: Acta Mater., 1999, vol. 47, pp. 4275–82.10.1016/S1359-6454(99)00308-0 ↗
16. T.A. Venkatesh and D.C. Dunand: Metall. Trans., 2000, vol. 31, pp. 781–92.10.1007/s11661-000-0020-7 ↗
17. D.B. Miracle: Acta Mater., 1993, vol. 41, pp. 649–84.10.1016/0956-7151(93)90001-9 ↗
18. R.D. Noebe, R.R. Bowman, and M.V. Nathal: Int. Mater. Rev., 1993, vol. 38, pp. 193–232.10.1179/imr.1993.38.4.193 ↗
19. D.M. Dimiduk, D.B. Miracle, and C.H. Ward: Mater. Sci. Techn., 1992, vol. 8, pp. 367–75.10.1179/mst.1992.8.4.367 ↗
20. N.S. Stoloff: Metall. Trans., 1993, vol. 24A, pp. 561–67.10.1007/BF02656626 ↗
21. S.L. Robinson and O.D. Sherby: Acta Mater., 1969, vol. 17, pp. 109–25.10.1016/0001-6160(69)90132-1 ↗
22. J.W. Pugh: Proc. ASTM, 1957, vol. 57, pp. 909–16.
23. B. Harris and E.G. Ellison: Trans. ASM, 1966, vol. 59, pp. 744–54.
24. A.K. Misra: Report No. CR 4171, NASA, Washington, DC, 1988.
25. C.W. SanMarchi and A. Mortensen: Metall. Trans., 1998, vol. 29A, pp. 2819–28.
26. A.F. Johnson: J. Mech. Phys. Solids, 1977, vol. 25, pp. 117–26.10.1016/0022-5096(77)90007-2 ↗
27. M.R. Piggott: J. Mater. Sci., 1981, vol. 16, pp. 2837–45.10.1007/BF02402848 ↗