Toward a Full Simulation of the Basic Oxygen Furnace: Deformation of the Bath Free Surface and Coupled Transfer Processes Associated with the Post-Combustion in the Gas Region
Source abstract
Abstract
The present article treats different phenomena taking place in a steelmaking converter through the development of two separate models. The first model describes the cavity produced at the free surface of the metal bath by the high-speed impinging oxygen jet. The model is based on a zonal approach, where gas compressibility effects are taken into account only in the high velocity jet region, while elsewhere the gas is treated as incompressible. The volume of fluid (VOF) method is employed to follow the deformation of the bath free surface. Calculations are presented for two- and three-phase systems and compared against experimental data obtained in a cold model experiment presented in the literature. The influence on the size and shape of the cavity of various parameters and models (including the jet inlet boundary conditions, the VOF advection scheme, and the turbulence model) is studied. Next, the model is used to simulate the interaction of a supersonic oxygen jet with the surface of a liquid steel bath in a pilot-scale converter. The second model concentrates on fluid flow, heat transfer, and the post-combustion reaction in the gas phase above the metal bath. The model uses the simple chemical reaction scheme approach to describe the transport of the chemical species and takes into account the consumption of oxygen by the bath and thermal radiative transfer. The model predictions are in reasonable agreement with measurements collected in a laboratory experiment and in a pilot-scale furnace.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Particle Dynamics in Fluid Flows · Combustion and flame dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. R.B. Banks and D.V. Chandrasekhara: J. Fluid Mech., 1963, vol. 15, pp. 13-35.10.1017/S0022112063000021 ↗
2. A. Nordquist, N. Kumbhat, L. Jonsson and P. Jonsson: Steel Res. Int., 2006, vol. 77, pp. 82-90.10.1002/srin.200606358 ↗
3. O. Olivares, A. Elias, R. Sanchez, M. Diaz-Cruz and R. Morales: Steel Res., 2002, vol. 73, pp. 44-51.10.1002/srin.200200172 ↗
4. A.V. Nguyen and G.M. Evans: Applied Mathematical Modelling, 2006, vol. 30, pp. 1472-1484.10.1016/j.apm.2006.03.015 ↗
5. H. Odenthal, J. Kempken, J. Schluter and W. Emling: Iron Steel Technol., 2007, vol. 4, pp. 71-89.
6. M. Ersson, L. Hoglund, A. Tilliander, L. Jonsson and P. Jonsson: ISIJ Int., 2008, vol. 48, pp. 147-153.10.2355/isijinternational.48.147 ↗
7. L. Zhang and F. Oeters: Steel Res., 1991, vol. 62, pp. 95-106.10.1002/srin.199101258 ↗
8. L. Zhang and F. Oeters: Steel Res., 1991, vol. 62, pp. 107-116.10.1002/srin.199101259 ↗
9. H. Gou, G. Irons and W. Lu: Metall. Trans. B, 1993, vol. 24, pp. 179-188.10.1007/BF02657884 ↗
10. J. Huber, J. Lehmann and R. Cadet: Rev. Metall. (Paris), 2008, vol. 105, pp. 121–26.10.1051/metal:2008024 ↗
11. N. Croft, K. Pericleous, and M. Cross: Numerical Methods in Laminar and Turbulent Flow, vol. 9, Part 2, edited by C. Taylor and P. Durbetki, Pineridge Press, Swansea, U.K., 1995, pp. 1269-1280.
12. B.E. Launder and D.B. Spalding: Lectures in Mathematical Models of Turbulence, Academic Press, London, England, 1972.
13. K.S. Abdol-Hamid, S.P. Pao, S.J. Massey and A. Elmiligui: Trans. ASME, 2004, vol. 126, pp. 844-850.
14. M. Alam, J. Naser and G. Brooks: Metall. Trans. B, 2010, vol. 41B, pp. 636-645.10.1007/s11663-010-9341-0 ↗
15. B. Lebon: Ph.D. Thesis, University of Greenwich, London, 2011.
16. I. Sumi, Y. Kishimoto, Y. Kikuchi and H. Igarashi: ISIJ Int., 2006, vol. 46, pp. 1312-1317.10.2355/isijinternational.46.1312 ↗
17. S.T. Johansen, J. Wu and W. Shyy: Int. J. Heat Fluid Flow, 2004, vol. 25, pp. 10-21.10.1016/j.ijheatfluidflow.2003.10.005 ↗
18. C.W. Hirt and B.D. Nichols: J. Comput. Phys., 1981, vol. 39, pp. 201-225.10.1016/0021-9991(81)90145-5 ↗
19. K. Pericleous, G. Djambazov, B. Lebon, T.N. Croft, J.F. Domgin, and P. Gardin: Rev. Metall. (Paris), 2008, vol. 105, pp. 207–217.10.1051/metal:2008011 ↗
20. H. Wang, G. Djambazov, K.A. Pericleous, R.A. Harding and M. Wickins: Computers & Fluids, 2011, vol. 42, pp. 92–101.10.1016/j.compfluid.2010.11.010 ↗
21. Z. Kountouriotis, K. Pericleous, G. Djambazov, J.F. Domgin, and P. Gardin: Proceedings of the 8th International Conference on CFD in the Oil & Gas, Metallurgical and Process Industries. E SINTEF Research Reports, SINTEF, Norway, 2012, ISBN 9788214052626.
22. G.S.B. Lebon, M.K. Patel, G. Djambazov and K.A. Pericleous: Computers & Fluids, 2012, vol. 59, pp. 91-100.10.1016/j.compfluid.2012.02.016 ↗
23. D. Wheeler: Ph.D. Thesis, University of Greenwich, London, 2000.
24. B.E. Launder, W.C. Reynolds, W. Rodi, J. Mathieu, and D. Jeandel: Turbulence Models and Their Applications, Paris, Eyrolles, 1984.
25. D.B. Spalding: Combustion and Mass Transfer, Pergamon Press, Oxford, 1979.10.1016/B978-0-08-022106-9.50010-3 ↗
26. L. Hjertager, B. Hjertager and T. Solberg: Comput. Chem. Eng., 2002, vol. 26, pp. 507-515.10.1016/S0098-1354(01)00799-2 ↗
27. Y. Doh: Ph.D. Thesis, Université de Lorraine, Nancy, 2012.
28. F. Qian, R. Mutharasan and B. Farouk: Metall. Trans. B, 1996, vol. 27B, pp. 911-920.10.1007/s11663-996-0004-0 ↗
29. A. Kaizawa, N. Sasaki, T. Inomoto, and Y. Ogawa: Proceeding of the 8th International Conference on CFD in Oil & Gas, Metallurgical and Process Industries, SINTEF/NTNU, Trondheim, Norway, 2011, Paper CFD11-88.
30. N.A. Molloy: J. Iron Steel Inst., 1970, vol. 208, pp. 943-950.
31. T. Kumagai and M. Iguchi: ISIJ Int., 2001, vol. 41, pp. S52-S55.10.2355/isijinternational.41.Suppl_S52 ↗
32. B.E. Launder: Int. J. Heat Fluid Flow, 1989, vol. 10, pp. 282-300.10.1016/0142-727X(89)90017-9 ↗
33. S.C. Koria and K.W. Lange: Steel Res., 1987, vol. 58, pp. 421-426.10.1002/srin.198700241 ↗
34. M. Hirai, R. Tsujino, T. Mukai, T. Harada and M. Omori: Trans. Iron Steel Inst. Jpn, 1987, vol. 27, pp. 805-813.10.2355/isijinternational1966.27.805 ↗
35. N. Dogan, G.A. Brooks, and M.A. Rhamdhani: ISIJ Int., 2011, vol. 51, pp. 1102–109.10.2355/isijinternational.51.1102 ↗