journal article·2022-06

Simultaneous Reduction of P2O5 and FeO from CaO–SiO2–FeO–P2O5 Synthesized Slag by Carbothermic Reduction

Huafang Yu, Takahiro Miki, Yasushi Sasaki, Tetsuya Nagasaka

Publisher page

Abstract

Steelmaking slag is considered an attractive phosphorus secondary resource since it contains relatively high phosphorus content and a fairly fixed composition with the negligibly small hazardous element. The carbothermic reductions of CaO–SiO2–FeO–P2O5 slags were carried out to investigate the reduction behavior of phosphorus from steelmaking slags. During the carbothermic reduction process of the slags, iron oxides and phosphorus oxides were reduced to metallic iron and phosphorus gases. The generated phosphorus gases dissolved into the reduced iron, and some escaped into the gas phase. The phosphorus content in the reduced iron increased until Fe2P is formed but could not dissolve anymore. It was found that the amount of phosphorus dissolution into the reduced iron and that escaped into the gas phase was comparable. The phosphorus content in the reduced iron is possibly determined by the balance between the carbon and phosphorus dissolution rates into the reduced iron. In other words, the phosphorus content in the reduced iron was determined by kinetics but not thermodynamics. The findings in the present study indicate that the carbothermic reduction of 2CaO·SiO2–3CaO·P2O5 solid solution separated from steelmaking slags will be the plausible approach to recover phosphorus from steelmaking slags.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Phosphorus and nutrient management · Minerals Flotation and Separation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. R.W. Scholz, A.H. Roy, F.S. Brand, D.T. Hellums, and A.E. Ulrich: Sustainable Phosphorus Management- A Global Transdisciplinary Roadmap, Springer, 2014.10.1007/978-94-007-7250-2 ↗
2. D. Cordell, J.-O. Drangert, and S. White: Glob. Environ. Change., 2009, vol. 19, pp. 292–305.10.1016/j.gloenvcha.2008.10.009 ↗
3. K. Matsubae-Yokoyama, H. Kubo, K. Nakajima, and T. Nagasaka: J. Ind. Ecol., 2009, vol. 13, pp. 687–705.10.1111/j.1530-9290.2009.00162.x ↗
4. H. Kubo, K. Matsubae-Yokoyama, and T. Nagasaka: ISIJ Int., 2010, vol. 50, pp. 59–64.10.2355/isijinternational.50.59 ↗
5. K. Matsubae-Yokoyama, H. Kubo, and T. Nagasaka: ISIJ Int., 2010, vol. 50, pp. 65–70.10.2355/isijinternational.50.65 ↗
6. E. Yamasue, K. Matsubae, K. Nakajima, S. Hashimoto, and T. Nagasaka: J. Ind. Ecol., 2013, vol. 17, pp. 722–30.10.1111/jiec.12047 ↗
7. K. Matsubae, E. Webeck, K. Nansai, K. Nakajima, M. Tanaka, and T. Nagasaka: Resour. Conserv. Recycl., 2015, vol. 105, pp. 360–67.10.1016/j.resconrec.2015.10.002 ↗
8. P. Wilfert, P.S. Kumar, L. Korving, G.-J. Witkamp, and M.C.M. van Loosdrecht: Environ. Sci. Technol., 2015, vol. 49, pp. 9400–14.10.1021/acs.est.5b00150 ↗
9. A. Kelessidis and A.S. Stasinakis: Waste Manage., 2012, vol. 32, pp. 1186–95.10.1016/j.wasman.2012.01.012 ↗
10. J. Havukainen, M.T. Nguyen, L. Hermann, M. Horttanainen, M. Mikkilä, I. Deviatkin, and L. Linnanen: Waste Manage., 2016, vol. 49, pp. 221–29.10.1016/j.wasman.2016.01.020 ↗
11. K. Matsubae, J. Kajiyama, T. Hiraki, and T. Nagasaka: Chemosphere., 2011, vol. 84, pp. 767–72.10.1016/j.chemosphere.2011.04.077 ↗
12. K. Yokoyama, H. Kubo, K. Mori, H. Okada, S. Takeuchi, and T. Nagasaka: ISIJ Int., 2007, vol. 47, pp. 1541–48.10.2355/isijinternational.47.1541 ↗
13. J.H. Shin and J.H. Park: ISIJ Int., 2013, vol. 53, pp. 2266–68.10.2355/isijinternational.53.2266 ↗
14. M.K. Oh, T.S. Kim, and J.H. Park: Metall. Mater. Trans. B., 2020, vol. 51, pp. 3028–38.10.1007/s11663-020-01957-y ↗
15. T. Kim and J. Lee: Mater. Trans., 2011, vol. 52, pp. 2233–38.10.2320/matertrans.M2011178 ↗
16. H. Yu, X. Lu, T. Miki, K. Matsubae, Y. Sasaki, T. Nagasaka: Resour. Conserv. Recycl. 2022, vol. 180, 106203.10.1016/j.resconrec.2022.106203 ↗
17. S. Shiomi, N. Sano, and Y. Matsushita: Tetsu-to-Hagane., 1977, vol. 63, pp. 1520–28.10.2355/tetsutohagane1955.63.9_1520 ↗
18. S. Takeuchi, N. Sano, and Y. Matsushita: Tetsu-to-Hagane., 1980, vol. 66, pp. 2050–57.10.2355/tetsutohagane1955.66.14_2050 ↗
19. K. Morita, M. Guo, Y. Miyazaki, and N. Sano: ISIJ Int., 2001, vol. 41, pp. 716–21.10.2355/isijinternational.41.716 ↗
20. K. Morita, M. Guo, N. Oka, and N. Sano: J. Mater. Cycles Waste Manag., 2002, vol. 4, pp. 93–101.
21. Y.-B. Kang, T. Kim, and J. Lee: Ironmak. Steelmak., 2012, vol. 39, pp. 498–503.10.1179/1743281212Y.0000000012 ↗
22. A. Matsui, K. Nakase, N. Kikuchi, Y. Kishimoto, K. Takahashi, and K. Ishida: Tetsu-to-Hagane., 2011, vol. 97, pp. 416–22.10.2355/tetsutohagane.97.416 ↗
23. K. Nakase, A. Matsui, N. Kikuchi, and Y. Miki: Tetsu-to-Hagane, 2016, vol. 102, pp. 485–91.10.2355/tetsutohagane.TETSU-2016-006 ↗
24. M. Hasegawa, Y. Kashiwaya, and M. Iwase: High Temp. Mater. Process., 2012, vol. 31, pp. 421–30.10.1515/htmp-2012-0077 ↗
25. H. Yu, T. Miki, Y. Sasaki, and T. Nagasaka: Metall. Mater. Trans. B., 2020, vol. 51, pp. 3007–15.10.1007/s11663-020-01945-2 ↗
26. H. Yu, X. Lu, T. Miki, Y. Sasaki, and T. Nagasaka: J. Sustain. Metall., 2021, vol. 7, pp. 459–69.10.1007/s40831-021-00350-6 ↗
27. X. Gao, H. Matsuura, M. Miyata, and F. Tsukihashi: ISIJ Int., 2013, vol. 53, pp. 1381–85.10.2355/isijinternational.53.1381 ↗
28. Q.F. Shu and Y. Liu: Ironmak. Steelmak., 2018, vol. 45, pp. 363–70.10.1080/03019233.2016.1274463 ↗
29. W. Yang, J. Yang, R. Zhang, and H. Sun: Steel Res. Int., 2021, vol. 92, p. 2100066.10.1002/srin.202100066 ↗
30. M. Bernhard, Y.-B. Kang, P. Presoly, A.E. Gheribi, and C. Bernhard: Calphad, 2020, vol. 70, p. 101795.10.1016/j.calphad.2020.101795 ↗
31. M. Sasabe, Y. Iida, and T. Yokoo: Tetsu-to-Hagane., 2014, vol. 100, pp. 325–30.10.2355/tetsutohagane.100.325 ↗
32. M. Sasabe, Y. Kiyosawa, M. Otsuka, K. Tanaka, and M. Tate: Tetsu-to-Hagane., 1991, vol. 77, pp. 2123–30.10.2355/tetsutohagane1955.77.12_2123 ↗