journal article·2004-08

Fabrication of foamable precursors by powder compression and induction heating process

S. W. Youn, C. G. Kang

Publisher page

Abstract

In the powder compact melting technique, metallic foams are fabricated by heating a precursor, thus initiating cell growth and foam formation. Proper precursor fabrication is very important because the density distribution after foaming and the foamability are determined during the precursor-fabrication process. The fabrication of the precursor has to be performed very carefully because any residual porosity or other defects will lead to poor results in further processing. In order to evaluate the effect of the compaction parameters on the kinetics of the foaming process, a series of experiments were performed. In this study, 6061 aluminum foams having a closed-cell structure were fabricated by the powder compact method and an induction heating process. An induction coil was designed to obtain a uniform temperature distribution over the entire cross-sectional area of the precursor. To establish the foamable precursor fabrication conditions, the effects of process parameters such as titanium hydride content (0.1 to 1.5 wt pct) and the compression pressure of the foamable precursor (50 to 150 kN) on the pore morphology were investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Polymer Foaming and Composites · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. J. Banhart: Progr. Mater. Sci., 2001, vol. 46, p. 559.10.1016/S0079-6425(00)00002-5 ↗
2. M.F. Ashby, A. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, and H.N.G. Wadley: Metal Foams—A Design Guide, Butterworth-Heinemann, Massachusetts, USA, 2000.
3. L.J. Gibson and M.F. Ashby: Cellular Solids: Structure and Properties, 2nd ed., Cambridge University Press, Cambridge, United Kingdom, 1997.10.1017/CBO9781139878326 ↗
4. G. Broggiato, F. Campana, F. Mascioni, and G. Santucci: Metal Foams and Porous Metal Structures, 2nd Int. Conf., Bremen, Germany, June 18–20, 2001. J. Banhart, M.F. Ashby, and N.A. Fleck, eds., MIT Press-Verlag, Berlin, Germany, 2001, p. 359.
5. M. Kobashi and N. Kanetake: Metal Foams and Porous Metal Structures, 2nd Int. Conf., Bremen, Germany, June 18–20, 2001, J. Banhart, M.F. Ashby, and N.A. Fleck, eds., MIT Press-Verlag, 2001, p. 221.
6. R. Gradinger, F. Simancik, and H.P. Degischer: Welding Technol., 1997, vol. 2, p. 701.
7. I. Duarte and J. Banhart: Acta Mater., 2000, vol. 48, p. 234910.1016/S1359-6454(00)00020-3 ↗
8. A.E. Markaki and T.W. Cltne: Acta Mater., 2001, vol. 49, p. 1677.10.1016/S1359-6454(01)00072-6 ↗
9. J. Banhart, J. Baumeister, and M. Webber: ASM Handbook, ASM INTERNATIONAL, Materials Park, OH, 1998, vol. 7, p. 1043.
10. F. Baumgartner and H. Gers: Proc. 1st Int. Conf. on Metal Foams and Porous Metal Structures, (MetFoam ’99), J. Bonhart, M.F. Ashby, and N.J. Fleck, eds., MIT Verlag, Berlin, Germany, 1999, p. 73.
11. B. Kriszt, B. Foroughi, K. Faure, and H.P. Degischer: Proc. 1st Int. Conf. on Metal Foams and Porous Metal Structures, (MetFoam ’99), J. Bonhart, M.F. Ashby, and N.J. Fleck, eds., MIT Verlag, Berlin, Germany, 1999, p. 241.
12. R. Kreese: Proc. 1st Int. Conf. on Metal Foams and Porous Metal Structures, (MetFoam ’99), J. Bonhart, M.F. Ashby, and N.J. Fleck, eds., MIT Verlag, Berlin, Germany, 1999, p. 31.
13. C.C. Yang and H. Nakae: J. Alloys Compounds, 2000, vol. 313, p. 188.10.1016/S0925-8388(00)01136-1 ↗
14. A.R. Kennedy: Scripta Mater., 2002, vol. 47, p. 763.10.1016/S1359-6462(02)00281-6 ↗
15. J. Baumeister: German Patent DE 40 18 360, 1990.10.1007/BF01082827 ↗
16. URL: http://www.ameritherm.com/overview_heating.html
17. H.K. Jung and C.G. Kang: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2967–77.10.1007/s11661-999-0134-5 ↗
18. C.G. Kang, H.K. Jung, and Y.J. Jung: Advanced Technology of Plasticity, Proc. 6th ICTP, 1999, vol. III, Japan Society for Technology of Plasticity, Tokyo, Japan, p. 1689.
19. C.G. Kang, S.W. Youn, and P.K. Seo: J. Mater. Eng. Perform., 2002, vol. 11 (2), p. 152.10.1361/105994902770344213 ↗
20. P. Kapranos, R.C. Gibson, D.H. Kirwood, and C.M. Sellars: Proc. 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Sheffield, 1996, SRP Ltd., UK, 1996, p. 148.
21. Induction Heating-Technical Report Data, Boo-Lee Therm Co. Ltd., South Korea, 1994 (Seoul, Korea).
22. E.J. Davies: Conduction and Induction Heating, Peter Peregrinus, London, 1990.10.1049/PBPO011E ↗
23. S. Zinn and S.L. Semiatin: Heat Treating, 1988, Aug., p. 29.
24. S. Zinn and S.L. Semiatin: Heat Treating, 1988, Oct., p. 39.
25. Z.L. Song, J.S. Zhu, L.M. Ma, and D.P. He: Mater. Sci. Eng., 2001, vol. A298, p. 137.10.1016/S0921-5093(00)01285-5 ↗
26. F. Simansik: Proc. 1st Int. Conf. on Metal Foams and Porous Metal Structures, (MetFoam ’99), J. Bonhart, M.F. Ashby, and N.J. Fleck, eds., MIT Verlag, Berlin, Germany, 1999, p. 235.
27. J.L. Grenestedt: J. Mech. Phys. Solid., 1998, vol. 46, p. 29.10.1016/S0022-5096(97)00035-5 ↗
28. A.M. Kraynik and D.A. Reinelt: J. Coll. Interface Sci., 1996, vol. 181, p. 511.10.1006/jcis.1996.0408 ↗