Formation and Evaluation of Protective Layer over Magnesium Melt Under CO2/Air Mixtures
Source abstract
Abstract
Molten magnesium oxidizes rapidly when exposed to air causing melt loss and handling difficulties. The use of certain additive gases to form a protective MgO layer over a magnesium melt has been proposed. The oxidation behavior of molten magnesium in air that contains various concentrations of CO2 was investigated, including the kinetics of the oxide layer growth. Experiments were performed using a thermogravimetric analysis unit in the temperature range of 943 K to 1043 K (670 °C to 770 °C). Results showed that a thin, coherent, and protective MgO-C layer was formed under the test conditions. The thicknesses of this layer formed under CO2/air ranged from 500 nm to 12 μm. Rate parameters were calculated and a model for the process was developed. The morphology and composition of the surface films were studied using SEM and EDS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. J.W. Fruehling: Ph.D. Thesis, University of Michigan, Ann Arbor, Michigan, 1970.
2. N. B. Pilling and R. E. Bedworth: Journal of the Institute of Metals, 1923, vol. 29, 529-591.
3. H. E. Friedrich and B. L. Mordike: Magnesium Technology, Springer, New York, 2006.
4. S.P. Cashion: Ph.D. Thesis, The University of Queensland, Brisbane, Australia, 1999.
5. E. F. Emley: Principles of Magnesium Technology, Pregamon Press, Oxford, 1966.
6. S. Couling, T. Leontis: Light Metals, 1980, vol. 4, 997-1009.
7. J.D. Hanawalt: US Patent No 4,089,678. Ann Arbor, MI, U.S. Patent and Trademark Office, 1978.
8. K. Aarstad: Ph.D. Thesis, Norwegian University of Science and Technology, Trondheim, Norway, 2004.
9. F.W. Bach, A. Karger, C. Pelz, and M. Schaper: Magnesium Technology, TMS, 2005, pp. 3–6.
10. P. Biedenkopf, A. Karger, L. Michael, and W. Schneider: Magnesium Technology, TMS, 2005, pp. 39–42.
11. Outokumpu HSC: Chemistry 5.1 for Windows—Chemical Reaction and Equilibrium Software with Extensive Thermochemical Database, Outokumpu Research Oy, Pori, Finland, 2002.
12. Z. Yuan and H. Y. Sohn: ISIJ International, 2014, vol. 54(6): 1235–43.10.2355/isijinternational.54.1235 ↗
13. D. R. Wall and H. Y. Sohn: J. Amer. Ceram. Soc., 1990, vol. 73, 2944–2952.10.1111/j.1151-2916.1990.tb06699.x ↗
14. H.Y. Sohn and D. Kim: Metall. Trans. B, 1987, vol. 18B, 451–457.10.1007/BF02656166 ↗
15. J. Szekely, J. W. Evans, and H. Y. Sohn: Gas-Solid Reactions, Chapter 6. Academic Press, New York, pp. 209-213, 1976.
16. S. Emami, H. Y. Sohn, H. G. Kim: Metall. Mater. Trans B, 2013, vol. 45B:1370–79. Doi: 10.1007/s11663-014-0059-2.10.1007/s11663-014-0059-2 ↗
17. H. Wang and H. Y. Sohn, Metall. Mater. Trans. B, 2013, vol. 44B, 133-145. Doi: 10.1007/s11663-012-9754-z.10.1007/s11663-012-9754-z ↗
18. J. M Smith: Chemical Engineering Kinetics, 2 nd ed., McGraw-Hill, New York, 1970, pp. 337, 349.
19. J. Kestin, K. Knierim, E.A. Mason, B. Najafi, S.T. Ro, and M. Waldman: J. Phys. Chem. Ref. Data, 1984, vol. 13, pp. 229–303.10.1063/1.555703 ↗