journal article·2020-12-30Open access

Laser Powder Bed Fusion of Potential Superalloys: A Review

Prince Valentine Cobbinah, Rivel Armil Nzeukou, Omoyemi Temitope Onawale, Wallace Rwisayi Matizamhuka

Metals· Volume 11· Issue 1

Abstract

The laser powder bed fusion (LPBF) is an additive manufacturing technology involving a gradual build-on of layers to form a complete component according to a computer-aided design. The LPBF process boasts of manufacturing value-added parts with higher accuracy and complex geometries for the transport, aviation, energy, and biomedical industries. TiAl-based alloys and high-entropy alloys (HEAs) are two materials envisaged as potential replacements of nickel-based superalloys for high temperature structural applications. The success of these materials hinge on optimization and implementation of tailored microstructures through controlled processing and appropriate alloy manipulations that can promote and stabilize new microstructures. Therefore, it is important to understand the LPBF technique, and its associated microstructure-mechanical property relationships. This paper discusses the metallurgical sintering processes of LPBF, the effects of process parameters on densification, microstructures, and mechanical properties of LPBFed TiAl-based alloys and HEAs. This paper also, presents updates and future studies recommendations on the LPBFed TiAl-based alloys and HEAs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical Engineering, Vaal University of Technology, Andries Potgieter Boulevard, Vanderbijlpark 1911, South Africa

References (100+)

Show source-provided references
1. Leyens, C., and Peters, M. (2003). γ-titanium aluminide alloys: Alloy design and properties. Titanium and Titanium Alloys. Fundamentals and Applications, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.10.1002/3527602119 ↗
2. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
3. Advances in gamma titanium aluminides and their manufacturing techniques10.1016/j.paerosci.2012.04.001 ↗
4. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
5. Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy10.1007/s10853-012-6260-2 ↗
6. A promising new class of high-temperature alloys: Eutectic high-entropy alloys10.1038/srep06200 ↗
7. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
8. Effect of Zr content on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.matdes.2016.01.033 ↗
9. Microstructure and wear behavior of AlxCo1. 5CrFeNi1. 5Tiy high-entropy alloys10.1016/j.actamat.2011.06.041 ↗
10. Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys10.1016/j.actamat.2012.06.046 ↗
11. Stable nanocrystalline NbMoTaW high entropy alloy thin films with excellent mechanical and electrical properties10.1016/j.matlet.2017.08.129 ↗
12. Phase evolution and magnetic characteristics of TiFeNiCr and TiFeNiCrM (M = Mn, Co) high entropy alloys10.1016/j.jmmm.2017.06.124 ↗
13. Air-oxidation of FeCoNiCr-based quinary high-entropy alloys at 700–900 °C10.1016/j.corsci.2017.02.008 ↗
14. Understanding effect of 3.5 wt.% NaCl on the corrosion of Al0.1CoCrFeNi high-entropy alloy10.1016/j.jnucmat.2017.08.015 ↗
15. Highly efficient decomposition of ammonia using high-entropy alloy catalysts10.1038/s41467-019-11848-9 ↗
16. Reversible room temperature hydrogen storage in high-entropy alloy TiZrCrMnFeNi10.1016/j.scriptamat.2019.12.009 ↗
17. Superior hydrogen storage in high entropy alloys10.1038/srep36770 ↗
18. Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using Laser Engineered Net Shaping (LENS)10.1016/j.ijhydene.2013.05.071 ↗
19. Superconductivity in REO0. 5F0. 5BiS2 with high-entropy-alloy-type blocking layers10.7567/APEX.11.053102 ↗
20. Chaudhary, V., Borkar, T., Mikler, C., Gwalani, B., Choudhuri, D., Soni, V., Alam, T., Ramanujan, R., and Banerjee, R. (2018, January 23–27). Additively Manufactured Functionally Graded FeNi based High Entropy Magnetic Alloys. Proceedings of the 2018 IEEE International Magnetics Conference (INTERMAG), Singapore.10.1109/INTMAG.2018.8508206 ↗
21. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
22. Metallurgical processing of titanium aluminides on industrial scale10.1016/j.intermet.2018.09.006 ↗
23. Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder10.1016/j.matdes.2018.107576 ↗
24. High-entropy alloys fabricated via powder metallurgy. A critical review10.1080/00325899.2019.1584454 ↗
25. Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl 0.5 Fe alloy with boron addition10.1007/s11661-004-0254-x ↗
26. Metal additive manufacturing: A review10.1007/s11665-014-0958-z ↗
27. A review on microstructures and properties of high entropy alloys manufactured by selective laser melting10.1088/2631-7990/ab9ead ↗
28. The quasi-static and blast response of steel lattice structures10.1177/1099636210388983 ↗
29. An investigation into the compressive properties of stainless steel micro-lattice structures10.1177/1099636210380997 ↗
30. Additive manufacturing: A framework for implementation10.1016/j.ijpe.2013.07.008 ↗
31. Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review10.1016/j.ijmachtools.2018.06.003 ↗
32. Kruth, J.-P., Badrossamay, M., Yasa, E., Deckers, J., Thijs, L., and Van Humbeeck, J. (2010, January 19–23). Part and material properties in selective laser melting of metals. Proceedings of the 16th International Symposium on Electromachining, Shanghai, China.
33. Study of selective laser melting of intermetallic TiAl powder using integral analysis10.1016/j.ijmachtools.2018.02.003 ↗
34. Cost-driven build orientation and bin packing of parts in selective laser melting (SLM)10.1016/j.ejor.2018.07.053 ↗
35. Selective laser melting: A manufacturing technology for the future?10.1002/latj.201290018 ↗
36. Consolidation phenomena in laser and powder-bed based layered manufacturing10.1016/j.cirp.2007.10.004 ↗
37. Rapid manufacturing of metal components by laser forming10.1016/j.ijmachtools.2005.09.005 ↗
38. Physical aspects of process control in selective laser sintering of metals10.1002/adem.200310099 ↗
39. Fundamental consolidation mechanisms during selective beam melting of powders10.1088/0965-0393/21/8/085011 ↗
40. Binding mechanisms in selective laser sintering and selective laser melting10.1108/13552540510573365 ↗
41. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties10.1016/j.pmatsci.2015.03.002 ↗
42. Selective laser melting of iron-based powder10.1016/j.jmatprotec.2003.11.051 ↗
43. Review of selective laser melting: Materials and applications10.1063/1.4935926 ↗
44. Comparison between Nd: YAG and CO2 lasers for use with selective laser sintering of metal powders
45. Absorptance of powder materials suitable for laser sintering10.1108/13552540010337029 ↗
46. Lasers in additive manufacturing: A review10.1007/s40684-017-0037-7 ↗
47. Majumdar, J.D., and Manna, I. (2012). Laser-Assisted Fabrication of Materials, Springer Science & Business Media.10.1007/978-3-642-28359-8 ↗
48. Research and progress in laser welding of wrought aluminum alloys. I. Laser welding processes10.1081/AMP-120017586 ↗
49. Mueller, R., Gu, H., and Ferguson, N. (1999). Nd: YAG Laser Welding for Automotive Manufacturing Applications, SAE. Technical Paper.10.4271/1999-01-3148 ↗
50. High density net shape components by direct laser re-melting of single-phase powders10.1023/A:1016185606642 ↗
51. Steen, W.M., and Mazumder, J. (2010). Laser Material Processing, Springer Science & Business Media.10.1007/978-1-84996-062-5 ↗
52. Flat-top mode from a 50 µm-core Yb-doped leakage channel fiber10.1364/OE.21.032371 ↗
53. Accurate alignment preserves polarization
54. Densification mechanism and microstructural evolution in selective laser sintering of Al–12Si powders10.1016/j.jmatprotec.2010.09.003 ↗
55. Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures10.1016/j.intermet.2013.11.012 ↗
56. Effects of laser scanning speeds on different states of the molten pool during selective laser melting: Simulation and experiment10.1016/j.matdes.2020.108542 ↗
57. Balling behavior of stainless steel and nickel powder during selective laser melting process10.1007/s00170-011-3566-1 ↗
58. Densification and microstructural evaluation during laser sintering of M2 high speed steel powder10.1179/026708304X3944 ↗
59. Single track formation in selective laser melting of metal powders10.1016/j.jmatprotec.2010.05.010 ↗
60. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
61. Investigation of fully dense laser sintering of tool steel powder using a pulsed Nd: YAG (neodymium-doped yttrium aluminium garnet) laser10.1243/095440603762554677 ↗
62. Processing conditions and mechanical properties of high-speed steel parts fabricated using direct selective laser sintering10.1243/095440503772680587 ↗
63. Improving productivity rate in SLM of commercial steel powders
64. Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts10.1108/13552541111124770 ↗
65. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy10.1016/j.jallcom.2014.06.172 ↗
66. Optimisation of selective laser melting for a high temperature Ni-superalloy10.1108/RPJ-06-2013-0063 ↗
67. Parametric optimization of selective laser melting for forming Ti6Al4V samples by Taguchi method10.1016/j.optlastec.2012.12.002 ↗
68. The effects of selective laser melting scan strategies on deviation of hybrid parts
69. Accuracy and density optimization in directly fabricating customized orthodontic production by selective laser melting10.1108/13552541211272027 ↗
70. Research on track overlapping during selective laser melting of powders10.1016/j.jmatprotec.2012.05.012 ↗
71. Study on energy input and its influences on single-track, multi-track, and multi-layer in SLM10.1007/s00170-011-3443-y ↗
72. Impact of inter-layer scan strategy on quality of direct fabrication metal parts in SLM process10.1016/j.optlastec.2009.08.018 ↗
73. Microstructures and properties of equimolar AlCoCrCuFeNi high-entropy alloy additively manufactured by selective laser melting10.1016/j.intermet.2020.106746 ↗
74. Selective laser melting of an equiatomic AlCrCuFeNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical behavior10.1016/j.jallcom.2018.08.290 ↗
75. Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: Microstructure, anisotropic mechanical response, and multiple strengthening mechanism10.1016/j.jallcom.2019.07.106 ↗
76. Selective laser melting of an oxide dispersion strengthened (ODS) γ-TiAl alloy towards production of complex structures10.1016/j.matdes.2017.08.034 ↗
77. Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by selective laser melting (SLM)10.1016/j.jmatprotec.2017.06.023 ↗
78. The investigation of the influence of laser remelting on density, surface quality and microstructure of selective laser melting parts10.1108/13552541111156450 ↗
79. Laser polishing of parts built up by selective laser sintering10.1016/j.ijmachtools.2007.01.013 ↗
80. On the microstructure, hardness and wear behavior of Al-Fe-Cr quasicrystal reinforced Al matrix composite prepared by selective laser melting10.1016/j.matdes.2017.06.060 ↗
81. Gas flow effects on selective laser melting (SLM) manufacturing performance10.1016/j.jmatprotec.2011.09.020 ↗
82. Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process
83. Effects of shielding gas composition and activating flux on GTAW weldments10.1016/j.matdes.2008.10.024 ↗
84. Investigation of the laser–powder–atmosphere interaction zone during the selective laser melting process10.1016/j.jmatprotec.2015.05.008 ↗
85. Effect of metal vaporization behavior on keyhole-mode surface morphology of selective laser melted composites using different protective atmospheres10.1016/j.apsusc.2015.07.044 ↗
86. Direct fabrication of a Ti-47Al-2Cr-2Nb alloy by selective laser melting and direct metal deposition processes10.4028/www.scientific.net/AMR.89-91.586 ↗
87. Effect of Nb additions on microstructure and properties of γ-TiAl based alloys fabricated by selective laser melting10.1016/S1003-6326(19)65009-0 ↗
88. Electron beam melting of Ti-48Al-2Nb-0.7 Cr-0.3 Si: Feasibility investigation10.1016/j.intermet.2016.03.001 ↗
89. Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting10.1016/j.actamat.2009.11.032 ↗
90. Defect-free laser powder bed fusion of Ti–48Al–2Cr–2Nb with a high temperature inductive preheating system10.1088/2515-7647/ab7080 ↗
91. Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation10.1016/j.intermet.2010.11.017 ↗
92. Electron beam melting of high niobium containing TiAl alloy: Feasibility investigation10.1002/srin.201100282 ↗
93. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
94. Additive manufacturing of TiAl-based alloys
95. Microstructure of γ-titanium aluminide processed by selective laser melting at elevated temperatures10.1016/j.intermet.2015.07.005 ↗
96. Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloy10.1016/j.jmatprotec.2014.04.002 ↗
97. Doubenskaia, M., Domashenkov, A., Smurov, I., and Petrovskiy, P. (2017, January 26–29). Comprehensive analysis of selective laser melting of TiAl powder. Proceedings of the Lasers Manufacture Conference, München, Germany.
98. Mogale, N.F., and Matizamhuka, W.R. (2020). Spark plasma sintering of titanium aluminides: A progress review on processing, structure-property relations, alloy development and challenges. Metals, 10.10.3390/met10081080 ↗
99. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
100. Crystal orientation, crystallographic texture and phase evolution in the Ti–45Al–2Cr–5Nb alloy processed by selective laser melting10.1016/j.matchar.2016.01.012 ↗