A Novel Classification Method for Pores in Laser Powder Bed Fusion
Source abstract
Abstract
Nowadays, additive manufacturing (AM) using laser powder bed fusion (LPBF) is acknowledged for its ability to generate near-net-shape components for various industries such as aerospace, automotive, and health industries. However, internal defects seem to be the inevitable concomitant in the current state of laser powder bed fusion of Al alloys. Hence, knowledge of the formation, different types, and morphologies of pores and their suppression is an essential element for successful future AM applications. The purpose of this research is to qualify a new approach of defect classification using X-ray tomography. In this framework, this research examined the influence of size, shape, and location of pores on crack initiation for AlSi10Mg parts produced by LPBF. For this reason, a total number of 39,228 pores detected in a cylindrical sample were categorised. Additionally, 26 selected pores of different morphology from the X-ray scan were analysed by means of finite element analysis (FEA). Moreover, fracture mechanics determinations were carried out to examine the correlations between pore characteristics and degree of stress concentration. The result is an evaluated novel pore classification method that can be used for process adjustments, quality assurance, as well as further research.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
FIT AG, Am Grohberg 1, 92331 Lupburg, Germany
Chair of Materials Engineering of Additive Manufacturing, Technical University of Munich, Boltzmannstr. 15, 85748 Garching, Germany
References (21)
Show source-provided references
1. Prediction of mechanical performance of Ti6Al4V cast alloy based on microCT-based load simulation10.1016/j.jallcom.2017.06.320 ↗
2. Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting10.1016/j.ijfatigue.2016.06.002 ↗
3. Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg10.1016/j.jmatprotec.2015.02.013 ↗
4. Reducing porosity in AlSi10Mg parts processed by selective laser melting
5. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing10.1016/j.jmatprotec.2014.06.005 ↗
6. Haeckel, F., Meixlsperger, M., and Burkert, T. (2017, January 7–9). Technological challenges for automotive series production in laser beam melting. Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA.
7. Selective laser melting of aluminium components10.1016/j.jmatprotec.2010.09.019 ↗
8. Livings, R.A., Biedermann, E.J., Wang, C., Chung, T., James, S., Waller, J.M., Volk, S., Krishnan, A., and Collins, S. (2020). Nondestructive Evaluation of Additive Manufactured Parts Using Process Compensated Resonance Testing. Struct. Integr. Addit. Manuf. Parts, 165–205.10.1520/STP162020180111 ↗
9. Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights10.1016/j.matdes.2019.108385 ↗
10. Quality control of AlSi10Mg produced by SLM: Metallography versus CT scans for critical defect size assessment
11. Measurement and characterization of porosity in aluminium selective laser melting parts using X-ray CT10.1080/17452759.2015.1112412 ↗
12. Characterization of additively manufacturing AlSi10Mg cubes with different porosities10.17159/2411-9717/1331/2021 ↗
13. Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography10.1016/j.matchar.2015.12.001 ↗
14. Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: Influence of processing parameters and heat treatment10.1016/j.matchar.2020.110225 ↗
15. Methods for Rapid Pore Classification in Metal Additive Manufacturing10.1007/s11837-019-03761-9 ↗
16. Computed tomography for characterization of fatigue performance of selective laser melted parts10.1016/j.matdes.2015.06.063 ↗
17. Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
18. Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape10.1111/ffe.12799 ↗
19. Murakami, Y. (2002). Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, Elsevier.
20. Material defects as the basis of fatigue design10.1016/j.ijfatigue.2011.12.001 ↗
21. Tensile strength performance with determination of the Poisson‘s ratio of additively manufactured AlSi10Mg samples10.1002/mawe.201800233 ↗