Effect of Bottom Blowing Mode on Fluid Flow and Mixing Behavior in Converter
Source abstract
Abstract
Bottom blowing agitation plays a crucial role in improving the reaction kinetics condition of molten bath during the steelmaking process. Herein, the influence of bottom blowing mode on the flow and mixing characteristics of molten bath and the abrasion characteristics of refractory lining in a 6:1 scaled-down model of a 100 t converter were investigated using physical and numerical simulations together. Eight bottom blowing modes were designed (uniform, three-point linear co-direction, three-point linear unco-direction, two-point linear, circumferential linear, A-type, V-type, and triangle alternating). The results indicated that bottom blowing mode has a significant effect on the local flow field at the inner ring of bottom tuyeres, the velocity interval distribution, and the turbulent kinetic energy, which in turn determines the tracer diffusion path and rate as well the mixing time of molten bath. Reasonable non-uniform bottom blowing modes promote the interaction between the various stirring sub-zones of the molten bath. Among them, the three-point linear co-direction mode and A-type mode have the highest mixing efficiency under the conditions of bottom blowing and combined blowing, respectively, which is superior to the uniform mode. In addition, the bottom blowing mode changed the location and degree of abrasion of the refractory lining, and the total abrasion of the non-uniform mode was reduced. The average value and fluctuation degree of integral wall shear stress for the A-type mode were minimal.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Cyclone Separators and Fluid Dynamics · Iron and Steelmaking Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Xueyuan Road 30, Beijing 100083, China
Technology and Research Center, Xinyu Iron and Steel Co., Ltd., Metallurgical Road 1, Xinyu 338001, China
Funding
National Natural Science Foundation of China · Jiangxi Provincial Department of Science and Technology
References (42)
Show source-provided references
1. Physical and mathematical modeling of multiphase flows in a converter10.2355/isijinternational.ISIJINT-2017-680 ↗
2. Effect of Slag Layer on the Multiphase Interaction in a Converter10.1007/s11837-018-3243-z ↗
3. Comprehensive model of oxygen steelmaking part 1: Model development and validation10.2355/isijinternational.51.1086 ↗
4. A process model for BOF process based on bath mixing degree10.1007/s12613-010-0379-4 ↗
5. Cold model investigations into the effects of bottom blowing in metallurgical reactors10.1002/srin.199501132 ↗
6. Bottom blowing investigations on a cold model reactor to optimise mixing behaviour in metallurgical processes10.1002/srin.200200002 ↗
7. Numerical simulation of gas and liquid flow in steelmaking converter with top and bottom combined blowing10.1179/1743281212Y.0000000059 ↗
8. Optimisation of the bottom tuyeres configuration for the BOF vessel using physical and mathematical modelling10.2355/isijinternational.47.1605 ↗
9. Physical simulation of metal mixing in a converter with hybrid injection10.3103/S0967091210090032 ↗
10. Study and application of bottom blowing technique of combined blowing converter10.1016/S1006-706X(14)60007-8 ↗
11. Optimization on bottom blowing system of a 210 t converter10.1016/S1006-706X(15)30143-6 ↗
12. Optimization of bottom tuyere configuration for Basic Oxygen Furnace steelmaking through experiments and CFD simulations10.1016/j.cej.2018.03.122 ↗
13. Evaluation of bottom stirring system in BOF steelmaking vessel using cold model study and thermodynamic analysis10.2355/isijinternational.46.1171 ↗
14. Influence of bottom tuyere configuration on bath stirring in a top and bottom combined blown converter10.2355/isijinternational.48.793 ↗
15. A water model study of bottom-blown oxygen steelmaking processes10.1007/BF02654323 ↗
16. Bath mixing behaviour in top-bottom-side blown converter10.1179/030192310X12700328925741 ↗
17. A novel approach to determine the mixing time in a water model of an AOD converter10.2355/isijinternational.52.1817 ↗
18. Effect of side-blowing arrangement on flow field and vanadium extraction rate in converter steelmaking process10.2355/isijinternational.ISIJINT-2017-463 ↗
19. Cheng, R., Zhang, L.J., Yin, Y.B., and Zhang, J.M. (2021). Effect of side blowing on fluid flow and mixing phenomenon in gas-stirred ladle. Metals, 11.10.3390/met11020369 ↗
20. Numerical and physical simulations of a combined top-bottom-side blown converter10.1002/srin.201400376 ↗
21. Physical and mathematical models of gas-liquid fluid dynamics in LD converters10.1002/srin.200200172 ↗
22. Cold model studies of mixing and mass transfer in steelmaking vessels10.1179/174328105X48188 ↗
23. Odenthal, H.J., Falkenreck, U., and Schlüter, J. (2006, January 5–8). CFD simulation of multiphase melt flows in steelmaking converters. Proceedings of the European Conference on Computational Fluid Dynamics, Delft, The Netherlands.
24. Technological progress of BOF steelmaking in period of development mode transition
25. Modeling of mixing behavior in a combined blowing steelmaking converter with a filter-based Euler-Lagrange model10.1007/s11837-018-2889-x ↗
26. Numerical simulation of influence of bottom blowing gas supply mode on converter mixing effect
27. Advanced blowing and stirring conditions in the BOF process
28. Simulation and application of pulsating bottom-blowing in EAF steelmaking10.1080/03019233.2018.1498759 ↗
29. A novel dual plugs gas blowing mode for efficient ladle metallurgy10.1080/03019233.2019.1576270 ↗
30. Fluid flow characteristic of EAF molten steel with different bottom-blowing gas flow rate distributions10.2355/isijinternational.ISIJINT-2019-794 ↗
31. Influence of the non-uniform bottom blowing gas supply mode on the dynamic conditions of molten pool during the converter steelmaking process10.1080/03019233.2020.1758996 ↗
32. A novel bottom stirring scheme to improve BOF performance through mixing and mass transfer modelling10.2355/isijinternational.49.1889 ↗
33. The effects of bottom blowing gas flow rate distribution during the steelmaking converter process on mixing efficiency10.1007/s11663-016-0593-1 ↗
34. Effect of differential flow schemes on gas-liquid flow and liquid phase mixing in a Basic Oxygen Furnace10.1016/j.ces.2017.03.010 ↗
35. Simulate on agitating and mass transfer effect of 300 t dephosphorization slag-steel interface
36. Wang, Y.N., Cao, L.L., Cheng, Z.F., Blanpain, B., and Guo, M.X. (2021). Mathematical methodology and metallurgical application of turbulence modelling: A review. Metals, 11.10.3390/met11081297 ↗
37. Mathematical and physical simulation of a top blown converter10.1002/srin.201300310 ↗
38. The numerical computation of turbulent flows10.1016/0045-7825(74)90029-2 ↗
39. Computational study on the behaviours of supersonic jets and their impingement onto molten liquid free surface in BOF steelmaking10.1179/1879139514Y.0000000124 ↗
40. Sun, J.K., Zhang, J.S., Lin, W.H., Feng, X.M., and Liu, Q. (2021). Effect of impact cavity shape induced by supersonic oxygen jet on the dynamic characteristics of molten bath in converter. Steel Res. Int., 92.10.1002/srin.202170091 ↗
41. Understanding characteristic of abrasion of refractory lining caused by bath oscillation in BOF steelmaking10.1007/s11837-016-2078-8 ↗
42. Launder, B.E., and Spalding, D.B. (1972). Mathematical Models of Turbulence, Academic Press.