journal article·2020-02-03Open access

Multi-Objective Optimization of Cutting Parameters in Turning AISI 304 Austenitic Stainless Steel

Yu Su, Guoyong Zhao, Yugang Zhao, Jianbing Meng, Chunxiao Li

Metals· Volume 10· Issue 2

Abstract

Energy conservation and emission reduction is an essential consideration in sustainable manufacturing. However, the traditional optimization of cutting parameters mostly focuses on machining cost, surface quality, and cutting force, ignoring the influence of cutting parameters on energy consumption in cutting process. This paper presents a multi-objective optimization method of cutting parameters based on grey relational analysis and response surface methodology (RSM), which is applied to turn AISI 304 austenitic stainless steel in order to improve cutting quality and production rate while reducing energy consumption. Firstly, Taguchi method was used to design the turning experiments. Secondly, the multi-objective optimization problem was converted into a simple objective optimization problem through grey relational analysis. Finally, the regression model based on RSM for grey relational grade was developed and the optimal combination of turning parameters (ap = 2.2 mm, f = 0.15 mm/rev, and v = 90 m/s) was determined. Compared with the initial turning parameters, surface roughness (Ra) decreases 66.90%, material removal rate (MRR) increases 8.82%, and specific energy consumption (SEC) simultaneously decreases 81.46%. As such, the proposed optimization method realizes the trade-offs between cutting quality, production rate and energy consumption, and may provide useful guides on turning parameters formulation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Energy Efficiency and Management · Advanced Machining and Optimization Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Shandong University of Technology, Zibo 255000, China

Funding

Key Technology Research and Development Program of Shandong · Natural Science Foundation of Shandong Province

References (23)

Show source-provided references
1. Application of response surface methodology in the optimization of cutting conditions for surface roughness10.1016/j.jmatprotec.2005.04.096 ↗
2. Energy consumption in machining: Classification, prediction, and reduction strategy10.1016/j.energy.2017.05.110 ↗
3. Sustainable machining as a mean of reducing the environmental impacts related to the energy consumption of the machine tool: A case study of AISI 1045 steel machining10.1007/s00170-018-3178-0 ↗
4. Measurement and uncertainty analysis of surface roughness and material removal rate in micro turning operation and process parameters optimization10.1016/j.measurement.2019.04.029 ↗
5. Prediction of surface roughness of 304 stainless steel and multi-objective optimization of cutting parameters based on GA-GBRT10.3390/app9183684 ↗
6. Determination of optimum parameters in plane grinding by using grey relational analysis
7. Multi-objective optimization using Taguchi based grey relational analysis for micro-milling of Al 7075 material with ball nose end mill10.1016/j.measurement.2013.02.002 ↗
8. Connotation and Assessment Method for Inherent Energy Efficiency of Machine tool10.3901/JME.2018.07.167 ↗
9. Automated energy monitoring of machine tool10.1016/j.cirp.2010.03.042 ↗
10. Unit process energy consumption models for material removal processes10.1016/j.cirp.2011.03.018 ↗
11. Energy requirements evaluation of milling machines based on thermal equilibrium and empirical modelling10.1016/j.jclepro.2013.02.039 ↗
12. SCE modeling and influence trend analysis of cutting parameters
13. Optimization of cutting parameters using response surface method for minimizing energy consumption and maximizing cutting quality in turning of AISI 6061 T6 aluminum10.1016/j.jclepro.2014.12.017 ↗
14. Energy consumption characteristics and influence on surface quality in milling10.1016/j.procir.2018.05.081 ↗
15. Optimization parameters for energy efficiency in end milling10.1016/j.procir.2017.12.005 ↗
16. A method integrating Taguchi, RSM and MOPSO to CNC machining parameters optimization for energy saving10.1016/j.jclepro.2016.06.097 ↗
17. Multi-objective optimization of milling parameters—The trade-offs between energy, production rate and cutting quality10.1016/j.jclepro.2013.02.030 ↗
18. Tool wear, surface topography, and multi-objective optimization of cutting parameters during machining AISI 304 austenitic stainless steel flange10.3390/met9090972 ↗
19. A novel approach to predicting surface roughness based on specific cutting energy consumption when slot milling Al-707510.1016/j.ijmecsci.2016.09.002 ↗
20. A new algorithm for developing a reference model for predicting surface roughness in finish machining of steels10.1080/002075497196046 ↗
21. An on-line approach for energy efficiency monitoring of machine tool10.1016/j.jclepro.2012.01.013 ↗
22. Multi-objective optimization of machining parameters during dry turning of AISI 304 austenitic stainless steel using grey relational analysis10.1016/j.mspro.2014.07.086 ↗
23. Modeling and optimization I: usability of response methodology10.1016/j.jfoodeng.2005.11.024 ↗