journal article·2019-11-26Open access

Low and Medium Carbon Advanced High-Strength Forging Steels for Automotive Applications

Koh-ichi Sugimoto, Tomohiko Hojo, Ashok Srivastava

Metals· Volume 9· Issue 12

Abstract

This paper presents the microstructural and mechanical properties of low and medium carbon advanced high-strength forging steels developed based on the third generation advanced high-strength sheet steels, in conjunction with those of conventional high-strength forging steels. Hot-forging followed by an isothermal transformation process considerably improved the mechanical properties of the forging steels. The improvement mechanisms of the mechanical properties were summarized by relating to the matrix structure, the strain-induced transformation of metastable retained austenite, and/or a mixture of martensite and austenite.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Systems Engineering, School of Science and Technology, Shinshu University, Nagano 380-8553, Japan

Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan

Department of Metallurgical Engineering, School of Engineering, OP Jindal University, Raigarh 496109, India

References (81)

Show source-provided references
1. Lightweight forging initiative—Phase II: Lightweight design potential in a light commercial vehicle
2. The lightweight forging initiative—Phase III: Lightweight forging design for hybrid cars and heavy-duty trucks
3. New bainitic steel for forgings10.1016/j.acme.2012.04.012 ↗
4. Critical assessment 22: Bainitic forging steels10.1080/02670836.2015.1114272 ↗
5. The enhancement of ductility in high-strength steels
6. Structure-properties relationship in TRIP steels containing carbide-free bainite10.1016/j.cossms.2004.10.002 ↗
7. The TRIP effect and its application in cold formable sheet steels10.1002/srin.201700218 ↗
8. Rana, R., and Singh, S.B. (2016). Automotive Steels—Design, Metallurgy, Processing and Applications, Woodhead Publishing.
9. Development and characterization of high strength impact resistant Fe-Mn-(Al-,Si) TRIP/TWIP steels10.1002/srin.200200211 ↗
10. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
11. Formability of Al-Nb bearing ultrahigh-strength TRIP-aided sheet steels with bainitic ferrite and/or martensite matrix10.2355/isijinternational.50.162 ↗
12. Sugimoto, K., and Kobayashi, J. (2010, January 17–21). Newly developed TRIP-aided martensitic steels. Proceedings of the Materials Science and Technology and Exhibition 2010 (MS&T 10), Houston, TX, USA.
13. Stretch-flangeability of 1.5 GPa grade TRIP-aided martensitic cold rolled sheet steels
14. Ultrahigh-strength TRIP-aided martensitic steels10.2355/isijinternational.52.1124 ↗
15. Sugimoto, K., Kobayashi, J., and Pham, D.V. (2013, January 23–27). Advanced ultrahigh-strength TRIP-aided martensitic sheet steels for automotive applications. Proceedings of the International Symposium on New Developments in Advanced High Strength Sheet Steels (AIST 2013), Vail, CO, USA.
16. Effects of microalloying on stretch-flangeability of TRIP-aided martensitic sheet steel10.2355/isijinternational.54.1943 ↗
17. Partitioning of carbon from supersaturated plates of ferrite with application to steel processing and fundamentals of the bainitic transformation10.1016/j.cossms.2004.09.003 ↗
18. Quenched and partitioned CMnSi steels containing 0.3 wt.% and 0.4 wt.% carbon10.1007/s11837-015-1620-4 ↗
19. Quenching and partitioning steel heat treatment10.1007/s13632-013-0082-8 ↗
20. Some phase transformations in steels10.1179/026708399773002773 ↗
21. Industrialised nanocrystalline bainitic steels—Design approach10.3139/146.111090 ↗
22. Mechanical behavior of carbide-free medium carbon bainitic steels10.1007/s11661-013-2079-y ↗
23. Theoretical design and advanced microstructure in super high strength steels10.1016/j.matdes.2008.08.042 ↗
24. Microstructure and mechanical properties of Fe–0.2C–5Mn steel processed by ART-annealing10.1016/j.msea.2011.05.039 ↗
25. Application of quenching and partitioning processing to medium Mn Steel10.1007/s11661-014-2657-7 ↗
26. Impact toughness of medium-Mn transformation-induced plasticity-aided steels10.1002/srin.201400585 ↗
27. Nanoprecipitate-hardened 1.5 GPa steels with unexpected high ductility10.1016/j.scriptamat.2009.02.062 ↗
28. (2019, October 01). Image IT Media. Nissan. Available online: http://image.itmedia.co.jp/l/im/mn/articles/1303/14/l_sp_130314nissan_03.jpg.
29. New generation advanced high strength steels: Developments, Trends and Constraints
30. Weight reduction of automotive seat components using high-strength steel with high formability
31. Wang, W., Wang, H., and Liu, S. (2016, January 1–5). Development of hot-rolled Q&P steel at Baosteel. Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), Kyoto, Japan.
32. Hot forging of ultrahigh-strength TRIP-aided steel10.4028/www.scientific.net/MSF.638-642.3074 ↗
33. Sugimoto, K., Sato, S., Kobayashi, J., and Srivastava, A.K. (2019). Effects of Cr and Mo on mechanical properties of hot-forged medium carbon TRIP-aided bainitic ferrite steels. Metals, 9.10.3390/met9101066 ↗
34. Microstructure and mechanical properties of ausformed ultrahigh-strength TRIP-aided steels10.4028/www.scientific.net/MSF.539-543.4309 ↗
35. Effects of hot forging process on combination of strength and toughness in ultrahigh-strength TRIP-aided martensitic steels10.4028/www.scientific.net/AMR.409.696 ↗
36. Effects of cooling rate on impact toughness of an ultrahigh-strength TRIP-aided martensitic steel10.4028/www.scientific.net/AMR.922.366 ↗
37. The effects of cooling rate on retained austenite characteristics of a 0.2C-1.5Si-1.5Mn-1.0Cr-0.05Nb TRIP-aided martensitic steel10.4028/www.scientific.net/MSF.783-786.1015 ↗
38. Microalloying concepts and application in long products10.1179/174328408X322222 ↗
39. Effect of vanadium on dynamic continuous cooling transformation behavior of medium-carbon forging steels10.1016/S1006-706X(17)30096-1 ↗
40. Garcia-Mateo, C., Morales-Rivas, L., Caballero, F.G., Milbourn, D., and Sourmail, T. (2016). Vanadium effect on a medium carbon forging steel. Metals, 6.10.3390/met6060130 ↗
41. Li, Y., and Milbourn, D. (2013, January 21–24). Vanadium microalloyed forging steel. Proceedings of the 2nd International Symposium on Automobile Steel, Anshan, China.
42. Interface precipitation of VC and resultant hardening in V-added medium carbon steels10.2355/isijinternational.51.1733 ↗
43. Enhancing the mechanical properties of vanadium-microalloyed medium-carbon steel by optimizing post-forging cooling conditions10.1080/10426914.2015.1070416 ↗
44. Mašek, B., and Jirková, H. (2014, January 4–5). New material concept for forging. Proceedings of the International Conference on Advances in Civil Structural Mechanical Engineering (ACSME 2014), Bangkok, Thailand.
45. Fracture behavior in medium-carbon Ti-V-Nb and V-Nb microalloyed ferritic-pearlitic and bainitic forging steels with enhanced machinability10.1016/S0921-5093(01)01679-3 ↗
46. Controlled forging technology for special steels10.4262/denkiseiko.78.259 ↗
47. Gramlich, A., Emmrich, R., and Bleck, W. (2019, January 1–3). Austenite reversion tempering-annealing of 4 wt. % manganese steels for automotive forging application. Proceedings of the 4th International Conference on Medium and High Mn Steels, Aachen, Germany.10.3390/met9050575 ↗
48. New forged steels, Energy-efficient solutions for stronger parts
49. Riedner, S., Van Soest, F., and Kunow, S. (2011, January 5–9). B-alloyed quench and temper steels—An option to classic CrMo and CrNiMo quench and temper steels. Proceedings of the 3rd International Conference on Steels for Cars and Trucks (SCT 2011), Salzburg, Austria.
50. Basic property of martensitic microalloyed steel—Development of microalloyed steel for forging using ausforming I
51. Microalloyed engineering steels with improved performance—An Overview
52. Krauss, G., and Banerji, S.K. (1987). Fundamentals of Microalloying Forging Steels, TMS.
53. Dickert, H.H., Florian, J.C., and Gervelmeyer, J. (2017, January 18–22). Air-hardening high strength steels for all dimensions (of forged components). Proceedings of the 5th International Conference on Steels for Cars and Trucks (SCT2017), Amsterdam, The Netherland.
54. Basic properties of ferrite-pearlitic microalloyed steel—Development of microalloyed steel for controlled forging I10.1143/JPSJ.70.569 ↗
55. Clarke, P., Green, M., and Dolman, R. (2014, January 15–19). Development of high strength microalloyed steel for powertrain applications. Proceedings of the 4th International Conference on Steels for Cars and Trucks (SCT2014), Braunschweig, Germany.
56. Engineer, S., Justinger, H., Janβen, O., Härtel, M., Hampel, C., and Randelhoff, T. (2011, January 5–9). Technological properties of the new high strength bainitic steel 20MnCrMo7. Proceedings of the 3rd International Conference on Steels for Cars and Trucks (SCT 2011), Salzburg, Austria.
57. Air cooled bainitic steels for strong, seamless pipes Part 1—Alloy design, kinetics and microstructure
58. Biermann, D., Felderhoff, F., Engineer, S., and Justinger, H. (2011, January 5–9). Machinability of high-strength bainitic steel 20MnCrMo7. Proceedings of the 3rd International Conference on Steels for Cars and Trucks (SCT 2011), Salzburg, Austria.
59. Sourmail, T., Smanio, V., Galtier, A., and Marchal, F. (2014, January 15–19). Bainitic steel grades for forged components: Role of transformation kinetics and design for induction hardened components. Proceedings of the 4th International Conference on Steels for Cars and Trucks (SCT2014), Braunschweig, Germany.
60. Roelofs, H., Krull, H.-G., Lembke, M., and Lapierre Boire, L.P. (2017, January 18–22). Continuously cooled high strength steels: From small to large sections. Proceedings of the 5th International Conference on Steels for Cars and Trucks (SCT2017), Amsterdam, The Netherland.
61. Maminska, K., Roth, A., d’Eramo, E., Marchal, F., Galtier, A., and Sourmail, T. (2017, January 18–22). A new bainitic forging steel for surface induction hardened components. Proceedings of the 5th International Conference on Steels for Cars and Trucks (SCT2017), Amsterdam, The Netherland.
62. Brecher, C. (2015). Designing new forging steels by ICMPE. Advances in Production Technology, Springer. Chapter 7.10.1007/978-3-319-12304-2 ↗
63. Fracture strength and toughness of ultrahigh strength TRIP aided steels10.1179/174328409X453307 ↗
64. Microstructure and Mechanical Properties of a TRIP-aided Martensitic Steel10.1007/s13632-015-0221-5 ↗
65. Development of low alloy TRIP-aided steel for hot-forging parts with excellent toughness
66. Structure-properties relationship in TRIP type bainitic ferrite steel austempered at different temperatures10.1186/s40712-017-0071-9 ↗
67. Papaefthymiou, S., Banis, A., Bouzouni, M., and Petrov, R.H. (2019). Effect of ultra-fast heat treatment on the subsequent formation of mixed martensitic/bainitic microstructure with carbides in a CrMo medium carbon steel. Metals, 9.10.3390/met9030312 ↗
68. Notch-fatigue properties of advanced TRIP-aided bainitic ferrite steels10.1007/s11661-012-1246-x ↗
69. Wirths, V., and Bleck, W. (2014, January 15–19). Carbide free bainitic forging steels with improved fatigue properties. Proceedings of the 4th International Conference on Steels for Cars and Trucks (SCT2014), Braunschweig, Germany.
70. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels10.1016/0001-6160(59)90170-1 ↗
71. Effects of the addition of Cr, Mo and Ni on the microstructure and retained austenite characteristics of 0.2%C-Si-Mn-Nb ultrahigh-strength TRIP-aided bainitic ferrite steels10.2355/isijinternational.52.1894 ↗
72. Microstructure, tensile and toughness properties after quenching and partitioning treatments of a medium-carbon steel10.1016/j.msea.2012.08.130 ↗
73. Concurrent enhancement of ductility and toughness in an ultrahigh strength lean alloy steel treated by bainite-based quenching-partitioning-tempering process10.1016/j.msea.2017.05.087 ↗
74. Enhanced ductility and toughness in an ultrahigh-strength Mn-Si-Cr-C steel: The great potential of ultrafine filmy retained austenite10.1016/j.actamat.2014.05.055 ↗
75. Process design for tough ductile martensitic steels through direct quenching and partitioning10.1016/j.matpr.2015.07.363 ↗
76. Microstructural design in quenched and partitioned (Q&P) steels to improve their fracture properties10.1016/j.msea.2016.01.011 ↗
77. The combining effects of ausforming on the transformation kinetics, microstructure and mechanical properties of low-carbon bainitic steel10.1016/j.matdes.2019.108123 ↗
78. Effects of microalloying on the impact toughness of ultrahigh-strength TRIP-aided martensitic steel10.1007/s11661-013-1882-9 ↗
79. Sugimoto, K., Hojo, T., and Srivastava, A.K. (2018). An overview of fatigue strength of case-hardening TRIP-aided martensitic steels. Metals, 8.10.3390/met8050355 ↗
80. Impact toughness of 0.2 Pct C-1.5 Pct Si-(1.5 to 5) Pct Mn transformation-induced plasticity-aided steels with an annealed martensite matrix10.1007/s11661-016-3376-z ↗
81. Gramlich, A., Emmrich, R., and Bleck, W. (2019). Austenite reversion tempering-annealing of 4 wt.% manganese steels for automotive forging application. Metals, 9.10.3390/met9050575 ↗