The Effect of PEO Treatment in a Ta-Rich Electrolyte on the Surface and Corrosion Properties of Low-Carbon Steel for Potential Use as a Biomedical Material
Source abstract
Abstract
Fe-based materials have extensive applications in the building and automobile industries due to their excellent mechanical properties and low cost. However, their biomedical employment is restricted by the corrosion propensity when in contact with bodily fluids. In this study, single-step Plasma Electrolytic Oxidation, PEO, treatment in Ta-rich electrolyte was used, for the first time, to improve the corrosion resistance of low-carbon steel SAE 1020 for possible use as device implants. The effect of the applied voltage on the chemical and phase composition, topography, wettability, roughness, and corrosion properties were addressed. The results indicated that the Fe-based oxide coatings had a rough and hydrophilic surface, increasing the Ta content with the applied potential. The phase composition of the coatings was mainly composed of hematite (Fe2O3), with the Fourier-transform Infrared Spectroscopy, FTIR, spectrums indicating the presence of some absorbed water and organic molecules. The corrosion resistance of the PEO-treated samples was better than the substrate against saline solution (0.9% NaCl) due to the Fe2O3 growth decorated with Ta particles, especially the sample treated at 200 V. The results state that Ta-enriched Fe-based oxide coatings could significantly improve the applicability of low-carbon steel SAE 1020 as a low-cost biomaterial, particularly for medical devices.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
FATec—Faculdade de Tecnologia Prof. Wilson Roberto Ribeiro de Camargo, Tatuí 18280-000, SP, Brazil
Laboratory of Technological Plasmas (LaPTec), Science and Technology Institute of Sorocaba (ICTS), São Paulo State University (UNESP), Sorocaba 18087-180, SP, Brazil
Laboratory of Anelasticity and Biomaterials, School of Sciences, São Paulo State University (UNESP), Bauru 17033-360, SP, Brazil
Funding
National Council for Scientific and Technological Development (CNPq)
References (47)
Show source-provided references
1. Prasad, K., Bazaka, O., Chua, M., Rochford, M., Fedrick, L., Spoor, J., Symes, R., Tieppo, M., Collins, C., and Cao, A. (2017). Metallic Biomaterials: Current Challenges and Opportunities. Materials, 10.10.3390/ma10080884 ↗
2. Review of Metallic Biomaterials in Dental Applications10.4103/jpbs.JPBS_88_20 ↗
3. Metallic Biomaterials of Knee and Hip—A Review. Trends Biomater
4. Biomaterials in Cardiovascular Research: Applications and Clinical Implications10.1155/2014/459465 ↗
5. A State-of-the-Art Review of the Fabrication and Characteristics of Titanium and Its Alloys for Biomedical Applications10.1007/s42242-021-00170-3 ↗
6. Effects on Hardness and Microstructure of AISI 1020 Low-Carbon Steel Processed by High-Pressure Torsion10.1016/j.jmrt.2017.05.002 ↗
7. Martínez, C., Briones, F., Villarroel, M., and Vera, R. (2018). Effect of Atmospheric Corrosion on the Mechanical Properties of SAE 1020 Structural Steel. Materials, 11.10.3390/ma11040591 ↗
8. Review on Corrosion and Corrosion Scale Formation upon Unlined Cast Iron Pipes in Drinking Water Distribution Systems10.1016/j.jes.2022.04.024 ↗
9. Characterization of Plasma Electrolytic Oxidation Coating on Low Carbon Steel Prepared from Silicate Electrolyte with Al Nanoparticles10.1016/j.ceramint.2017.09.084 ↗
10. Characterization of Graphite Containing Ceramic Coating Prepared on Carbon Steel by Plasma Electrolytic Oxidation
11. Formation of Titania Composite Coatings on Carbon Steel by Plasma Electrolytic Oxidation10.1016/j.apsusc.2010.03.038 ↗
12. Functionalization Treatment of Micro-Arc Oxidation Coatings on Magnesium Alloys: A Review10.1016/j.jallcom.2021.160453 ↗
13. A Review of Recent Work on Discharge Characteristics during Plasma Electrolytic Oxidation of Various Metals10.1080/09506608.2018.1466492 ↗
14. Anticorrosive Non-Crystalline Coating Prepared by Plasma Electrolytic Oxidation for Ship Low Carbon Steel Pipes10.1038/s41598-020-72787-w ↗
15. Characterization and Properties of Plasma Electrolytic Oxidation Coating on Low Carbon Steel Fabricated from Aluminate Electrolyte10.1016/j.vacuum.2017.08.003 ↗
16. Study of the Deburring Process for Low Carbon Steel by Plasma Electrolytic Oxidation10.1088/1009-0630/18/8/12 ↗
17. Tantalum and Its Derivatives in Orthopedic and Dental Implants: Osteogenesis and Antibacterial Properties10.1016/j.colsurfb.2021.112055 ↗
18. Porous Tantalum and Titanium in Orthopedics: A Review10.1021/acsbiomaterials.9b00493 ↗
19. Corrosion and Wear Behaviours of a Reactive-Sputter-Deposited Ta 2 O 5 Nanoceramic Coating10.1016/j.apsusc.2016.02.014 ↗
20. Huang, H.-L., Tsai, M.-T., Chang, Y.-Y., Lin, Y.-J., and Hsu, J.-T. (2020). Fabrication of a Novel Ta(Zn)O Thin Film on Titanium by Magnetron Sputtering and Plasma Electrolytic Oxidation for Cell Biocompatibilities and Antibacterial Applications. Metals, 10.10.3390/met10050649 ↗
21. In Vitro Corrosion Resistance of a Ta2O5 Nanofilm on MAO Coated Magnesium Alloy AZ31 by Atomic Layer Deposition
22. In Situ Preparation of a Novel Ta2O5/MAO Composite Coating on Magnesium for Anti-Corrosion Protection10.1016/j.surfcoat.2021.128003 ↗
23. Determination of Kinetic Parameters from a New Quadratic Approximation of the Butler-Volmer Equation10.1016/j.jelechem.2022.116443 ↗
24. Anodic Processes in Plasma Electrolytic Oxidation of Aluminium in Alkaline Solutions10.1016/j.electacta.2003.11.027 ↗
25. Growth Mechanisms of Ca- and P-Rich MAO Films in Ti-15Zr-XMo Alloys for Osseointegrative Implants10.1016/j.surfcoat.2018.02.099 ↗
26. Improving the Corrosion Resistance of Micro-Arc Oxidation Coated Mg–Zn–Ca Alloy10.1039/C9RA10741J ↗
27. The Effect of Adding Polyethylene Glycol to Electrolyte Solution on Micro-Arc Oxidation Coating on Pure Aluminum10.1016/j.apsusc.2022.154047 ↗
28. Simchen, F., Sieber, M., Kopp, A., and Lampke, T. (2020). Introduction to Plasma Electrolytic Oxidation—An Overview of the Process and Applications. Coatings, 10.10.3390/coatings10070628 ↗
29. Kim, Y.-S., and Kim, J.-G. (2017). Corrosion Behavior of Pipeline Carbon Steel under Different Iron Oxide Deposits in the District Heating System. Metals, 7.10.3390/met7050182 ↗
30. In Situ PM-IRRAS at the Air/Electrolyte/Solid Interface Reveals Oxidation of Iron to Distinct Minerals10.1021/acs.jpca.0c03592 ↗
31. Hosseinpour, S., and Johnson, M. (2017). Vibrational Spectroscopy in Studies of Atmospheric Corrosion. Materials, 10.10.3390/ma10040413 ↗
32. Combination of FTIR Reflection Absorption Spectroscopy and Work Function Measurement for In-Situ Studies of Plasma Modification of Polymer and Metal Surfaces10.1016/j.surfcoat.2005.02.014 ↗
33. Infrared Optical Properties of Amorphous and Nanocrystalline Ta2O5 Thin Films10.1063/1.4819325 ↗
34. Kaga, N., Fujimoto, H., Morita, S., Yamaguchi, Y., and Matsuura, T. (2021). Contact Angle and Cell Adhesion of Micro/Nano-Structured Poly(Lactic-Co-Glycolic Acid) Membranes for Dental Regenerative Therapy. Dent. J., 9.10.3390/dj9110124 ↗
35. Al-Azzam, N., and Alazzam, A. (2022). Micropatterning of Cells via Adjusting Surface Wettability Using Plasma Treatment and Graphene Oxide Deposition. PLoS ONE, 17.10.1371/journal.pone.0269914 ↗
36. Development of Tantalum with Highly Hydrophilic Surface and Antimicrobial Properties Obtained by Micro-arc Oxidation Process10.1002/jbm.b.34748 ↗
37. Recent Advance in Surface Modification for Regulating Cell Adhesion and Behaviors10.1515/ntrev-2020-0076 ↗
38. Effect of Surface Energy and Roughness on Cell Adhesion and Growth—Facile Surface Modification for Enhanced Cell Culture10.1039/D1RA02402G ↗
39. Advancement of Plasma Electrolytic Oxidation towards Non-Valve Metals10.1016/j.surfcoat.2022.128403 ↗
40. Effect of Temperature on Thermal Oxidation Behavior of Biomedical Ti-Zr-Mo Alloys10.1016/j.jallcom.2022.164202 ↗
41. Improvement of Corrosion Protective Performance of Organic Coating on Low Carbon Steel by PEO Pretreatment10.1016/j.porgcoat.2015.09.003 ↗
42. Plasma Electrolytic Oxidation Behavior and Corrosion Resistance of Brass in Aluminate Electrolyte Containing NaH2PO4 or Na2SiO310.1016/S1003-6326(22)66072-2 ↗
43. Microstructure and Corrosion Resistance of Ceramic Coating on Carbon Steel Prepared by Plasma Electrolytic Oxidation10.1016/j.surfcoat.2009.10.023 ↗
44. A Review on Iron Oxide Nanoparticles and Their Biomedical Applications10.1007/s10948-018-4841-2 ↗
45. The Effect of Hematite on the Corrosion Behavior of Copper in Saturated Red Soil Solutions10.1007/s11665-020-04741-w ↗
46. Inhibitory Effects of Hematite Nanoparticles on Corrosion Protection Function of TiO2 Coating Prepared by Plasma Electrolytic Oxidation10.1016/j.surfcoat.2021.126938 ↗
47. Electrochemical Properties of Oxide Scale on Steel Exposed in Saturated Calcium Hydroxide Solutions with or without Chlorides