The Effects of TIG Welding Rod Compositions on Microstructural and Mechanical Properties of Dissimilar AISI 304L and 420 Stainless Steel Welds
Source abstract
Abstract
The usage of AISI/SAE 304L austenitic and 420 martensitic stainless steels is receiving greater interest especially in the defence and navy industries. 304L stainless steels exhibit excellent resistance to oxidizing media, while martensitic 420 alloy provides high strength values besides satisfactory corrosion properties at ambient atmospheres. In this work; 420 quality martensitic stainless steel is TIG (Tungsten Inert Gas) welded with 304L quality low carbon austenitic stainless steel plates. As filler metal dominantly determines the weld metals chemical compositions and final microstructures, 3 different TIG welding rods of ER312, ER316L ve ER2209 are used in welding operations in order to obtain 3 discrete weld metal contents under high purity argon shielding gas. Microstructural inspection, microhardness survey and Charpy V-notch impact tests are applied to all joints after welding operations. The specimen welded by ER2209 TIG welding rod executed the highest impact test results besides exhibiting the lowest micro-hardness profiles at heat affected zones and weld metals. All of the welded specimens weld region hardness profiles were determined to be lower than unwelded 420 martensitic stainless steel base metal.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Metallurgical and Material Engineering Department, Faculty of Engineering, Kırıkkale University, 71450 Kırıkkale, Turkey
Department of Defense Technologies, Institute of Science, Kırıkkale University, 71450 Kırıkkale, Turkey
References (15)
Show source-provided references
1. (2005). ASM Handbook, Volume 1: Properties and Selection: Iron, Steel and High Performance Alloys, ASM International.
2. Lippold, J., and Kotecki, D. (2005). Welding Metallurgy and Weldability of Stainless Steels, Wiley Interscience Publications.
3. (1993). ASM Metals Handbook Volume 6: Welding Brazing and Soldering, ASM International.
4. Kou, S. (2002). Welding Metallurgy, Wiley Interscience Publications. [2nd ed.].10.1002/0471434027 ↗
5. (1991). ASM Metals Handbook Volume 4, Heat treating, ASM International.
6. Vander Voort, G.F. (2004). ASM Handbook Volume 9: Metallography and Microstructures, ASM International.10.31399/asm.hb.v09.9781627081771 ↗
7. Brandes, E.A., and Brook, G.B. (1999). Smithells Metals Reference Book, Butterworth, Heinemann, Reed Elsevier Plc Group. [7th ed.].
8. ISO 15614-1 (2017). Specification and Qualification of Welding Procedures for Metallic Materials-Welding Procedure Test-Part 1: Arc and Gas Welding of Steels and Arc Welding of Nickel and Nickel Alloys, International Organization for Standardization.
9. ASTM A370 (2017). Standard Test Methods for Mechanical Testing of Steel Products, ASTM International.
10. ASTM E23-12c (2012). Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, ASTM International.
11. EN ISO 9015-2 (2016). Destructive Tests on Welds in Metallic Materials, Hardness Testing, Part 2: Micro-Hardness Test on Arc Welded Joints, International Organization for Standardization.
12. ASTM A240/A240M (2017). Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and for General Applications, ASTM International.
13. AWS A5.9 (2017). Specification for Bare Stainless Steel Welding Electrodes and Rods, American Welding Society.
14. EN ISO 14343 (2017). Welding Consumables, Wire Electrodes, Strip Electrodes, Wires and Rods for Arc Welding of Stainless and Heat Resisting Steels, Classification, International Organization for Standardization.
15. Failure of super 13Cr stainless steel due to excessive hardness in the welded joint10.1016/j.engfailanal.2018.04.018 ↗