journal article·2025-02-16Open access

Microstructure and Performance of Body-Centered Cubic-Based Dual-Phase Composite Eutectic High-Entropy Alloys Prepared by Si Doping

Saike Liu, Aoxiang Li, Kaiwen Kang, Jinshan Zhang, Di Huang, Chunning Che, Yiteng Jiang, Mingkun Xu, Borui Zhang, Yaqing Li, Gong Li

Metals· Volume 15· Issue 2

Abstract

AlCrFeNi-based high-entropy alloys (HEAs) have emerged as a prominent research system, attracting significant interest due to their compositional diversity and the tunability of their phase structures. However, in practical applications, single-phase AlCrFeNi-based HEAs often face a trade-off between toughness and strength. Therefore, designing multi-phase composite eutectic high-entropy alloys (EHEAs) to optimize their mechanical properties and microstructure has become a key research focus. Si, a common non-metallic element, plays a significant role in strengthening metal materials. In this paper, AlCrFeNi with Si doping strengthening (AlCrFeNi)100-xSix composite EHEAs were successfully fabricated. A systematic analysis was conducted to investigate the impacts of Si doping on the microstructure and mechanical properties of AlCrFeNi-based composite EHEAs. This study shows that with increasing Si content, the biphasic lamellar composite structure at the grain boundaries gradually expands, forming flower petals. The precipitate structure within the grains evolves into flower disks, which form a sunflower-like composite structure in the alloy. The volume fraction of lamellar structures increases in the petals, accompanied by grain refinement. Furthermore, the yield strength of the alloy increases from 1131 MPa to 1360 MPa with increasing Si content. This provides guidance for the design of high-performance composite EHEAs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China

Funding

National Key Research and Development Program of China · National Natural Science-Foundation of China · Songshan Lake Materials Laboratory

References (45)

Show source-provided references
1. Relationship between the unique microstructures and behaviors of high-entropy alloys10.1007/s12613-023-2777-4 ↗
2. Formation of B2 phase and its stability in equiatomic Al-Cu-Fe-Ni-Ti high entropy alloy10.1016/j.jalmes.2024.100137 ↗
3. Microstructural characterization and thermal stability of AlCrFeNiTi + Y2O3 high-entropy alloy nanocomposites prepared by mechanical alloying10.1016/j.matlet.2024.137018 ↗
4. Remarkable thermal stability of nanocrystalline CoCrFeNi high entropy alloy achieved through the incorporation of rare-earth element samarium10.1016/j.intermet.2024.108608 ↗
5. Zhang, J., Yoon, K.N., Kim, M.S., Ahn, H.S., Kim, J.Y., Ryu, W.H., and Park, E.S. (2021). Manipulation of Microstructure and Mechanical Properties in N-Doped CoCrFeMnNi High-Entropy Alloys. Metals, 11.10.3390/met11091487 ↗
6. Kovalenko, E., Krasanov, I., Valdaytseva, E., Stankevich, S., Klimova-Korsmik, O., and Gushchina, M. (2024). Microstructure and Mechanical Properties of High-Entropy Alloy FeCoNiCr(X) Produced by Laser Directed Energy Deposition Process: Effect of Compositional Changes. Metals, 15.10.3390/met15010026 ↗
7. Pourmohammadi, S., Mohammadnejad, A., Bahrami, A., Anijdan, S.H.M., Park, N., Ghosh, M., and Stability, P. (2023). Microstructure, and Mechanical Properties of Spark Plasma Sintered Nanocrystalline Boron-Doped AlCoFeMnNi High-Entropy Alloy. Metals, 13.10.3390/met13061025 ↗
8. Jiang, B., Huang, Z., Liu, C., Wang, H., Shu, F., Zhao, Y., and Lei, H. (2024). Optimization of Process Parameters and Microstructure of CoCrFeNiTiAl High-Performance High-Entropy Alloy Coating. Metals, 14.10.3390/met14121384 ↗
9. Preparation and performances of molybdenum—Copper alloy with additions of tungsten, nickel, iron and cerium dioxide10.1016/j.ijrmhm.2024.106691 ↗
10. Effect of Sigma and L21 phases co-precipitation on the mechanical properties of CoCr0.6NiV0.6Al0.35Tix high entropy alloy10.1016/j.msea.2024.147689 ↗
11. Variation of microstructures and properties of Co0.2CrAlNi high entropy alloy doped Si10.1016/j.jallcom.2022.167081 ↗
12. Effect of Si element on phase transformation and mechanical properties for FeCoCrNiSix high entropy alloys10.1016/j.matlet.2020.128809 ↗
13. Effect of cold-rolling and annealing temperature on microstructure, texture evolution and mechanical properties of FeCoCrNiMn high-entropy alloy10.1016/j.jmrt.2024.09.124 ↗
14. Microstructural evolution and high temperature hot corrosion behaviour of AlCoCrFeNiTi high-entropy alloy coatings10.1016/j.mtcomm.2024.110910 ↗
15. Yi, H., Zhang, Y., Xie, R., Bi, M., and Wei, D. (2021). High-Temperature Deformation Behaviors of the C-Doped and N-Doped High Entropy Alloys. Metals, 11.10.3390/met11101517 ↗
16. Liu, D., Jin, X., Yang, H., Qiao, J., and Zhang, Y. (2023). High-Temperature Mechanical Behavior of Cobalt-Free FeMnCrNi(Al) High-Entropy Alloys. Metals, 13.10.3390/met13111885 ↗
17. Effect of Cr content on the high temperature oxidation behavior of FeCoNiMnCr porous high-entropy alloys10.1016/j.jmrt.2024.10.025 ↗
18. Lightweight, ultrastrong and high thermal-stable eutectic high-entropy alloys for elevated-temperature applications10.1016/j.actamat.2023.118806 ↗
19. A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures10.1016/j.scriptamat.2021.114132 ↗
20. Samoilova, O., Pratskova, S., Suleymanova, I., Shaburova, N., Moghaddam, A.O., and Trofimov, E. (2023). Effect of Pt Addition on the Oxidation and Corrosion Resistance of Al0.25CoCrFeNi High-Entropy Alloy. Metals, 13.10.3390/met13101709 ↗
21. Effect of Zr on phase separation, mechanical and corrosion behavior of heterogeneous CoCrFeNiZrx high-entropy alloy10.1016/j.jmst.2021.08.062 ↗
22. Strategies for optimizing mechanical properties of refractory high entropy alloys induced by solid solution strengthening mechanism10.1016/j.msea.2024.147696 ↗
23. Multi-phase FCC-based composite eutectic high entropy alloy with multi-scale microstructure10.1016/j.msea.2023.145815 ↗
24. Bulk metallic glass composites containing B2 phase10.1016/j.pmatsci.2021.100799 ↗
25. Precipitation kinetics, microstructure, and equilibrium state of A2 and B2 phases in multicomponent Al2.75CoCrFeNi alloy10.1007/s10853-020-04487-9 ↗
26. Synthesis of A2 and B2 phases in AlxCoCrFeNi multi-component system10.1007/s13632-020-00643-4 ↗
27. Callegari, B., Lima, T.N., and Coelho, R.S. (2023). The influence of alloying elements on the microstructure and properties of Al-Si-based casting alloys: A review. Metals, 13.10.3390/met13071174 ↗
28. Evolution of the microstructure and mechanical properties of as-cast Al0.3CoCrFeNi high entropy alloys by adding Si content10.1016/j.msea.2022.142983 ↗
29. Effect of silicon addition on the corrosion resistance of Al0.2CoCrFe1.5Ni high-entropy alloy in saline solution10.1016/j.jallcom.2023.171226 ↗
30. Effect of volumetric energy density on the mechanical properties and corrosion resistance of laser-additive-manufactured AlCoCrFeNi2.1 high-entropy alloys10.1016/j.jallcom.2024.178032 ↗
31. Microstructure, wear and oxidation behavior of AlCrFeNiX (X= Cu, Si, Co) high entropy alloys produced by powder metallurgy10.1016/j.vacuum.2021.110143 ↗
32. Yang, T., Deng, H., Wang, Y., Feng, J., Meng, Q., Qi, J., Wei, F., Hu, Z., Meng, D., and Sui, Y. (2024). Study on the Microstructure and Mechanical Properties of AlCr1.6FexNi(3.2-X)Si0.2 High-Entropy Alloys. SSRN, 4705447.10.2139/ssrn.4705447 ↗
33. Effect of Ti content on spinodal decomposed microstructure and properties of AlCoCrFeNiTix high-entropy alloy coatings prepared by laser cladding10.1016/j.jmrt.2024.12.123 ↗
34. Manipulation of the spinodal decomposition behavior in a multicomponent system10.1016/j.scriptamat.2022.114893 ↗
35. A sunflower-like eutectic microstructure in the AlCrFeMnNi2 high-entropy alloy with excellent compressive mechanical properties10.1016/j.matlet.2023.134107 ↗
36. Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions10.1016/j.actamat.2018.01.050 ↗
37. Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al (Sc) alloys10.1016/S1359-6454(02)00201-X ↗
38. Precipitation hardening caused by a difference in shear modulus between particle and matrix10.1002/pssa.2210780223 ↗
39. On the critical resolved shear stress from misfitting particles10.1016/0036-9748(78)90194-1 ↗
40. Courtney, T.H. (2005). Mechanical Behavior of Materials, Waveland Press.
41. Hudok, D. (1990). Properties and Selection: Irons, Steels, and High-Performance Alloys, ASM Press. Metals Handbook.
42. Elastic constants and youngs modulus of NiAl
43. The strength of a precipitation hardened AlZnMg alloy10.1016/0001-6160(78)90127-X ↗
44. Effect of antiphase boundaries on the electronic structure and bonding character of intermetallic systems: NiAl10.1103/PhysRevB.43.6446 ↗
45. Particle strengthening of metals and alloys