journal article·2023-07-17Open access

Crystallization of Zr-Based Amorphous Alloys in Laser Welding

Shiju Yan, Chengli Song, Lingling Huang, Liang Han, Chengyong Wang

Metals· Volume 13· Issue 7

Abstract

Crystallization often occurs in the laser welding of amorphous alloys, reducing the properties of amorphous alloys. Therefore, the research in this thesis focuses on the experimental selection of suitable welding parameters to prevent crystallization of Zr-based amorphous alloys during the laser welding process. As such, it is necessary to simulate the temperature field curve of the welding area by computer and then determine the power and laser moving speed of laser welding. In this paper, the temperature field curve of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 (Vit1) amorphous alloy in laser welding is obtained by finite element analysis. The continuous heating curve (CHT) of Vit1 is fitted by the Vogel–Fulcher–Tammann (VFT) equation and the Kissinger equation. If the temperature field curve intersects with the CHT curve, crystallization occurs. The experiment results show that the VFT equation can be used to predict the crystallization of Vit1 better in laser welding. The temperature and welding time are increased by using a low welding speed. Therefore, the temperature of the weld zone cannot fall in time, resulting in the intersection of the temperature field curve and the CHT curve. Thus, crystallization can be avoided if the welding speed is controlled within a reasonable range, and the highest temperature is kept under the CHT curve. The combination of the CHT curve and the temperature field curve shows that the samples at 300 W-3 mm/s and 300 W-6 mm/s welding parameters all undergo crystallization, while the samples at 300 W-9 mm/s and 300 W-12 mm/s welding parameters do not undergo crystallization. Through the flexural test, it is found that the flexural strength of the welded interface is at its the maximum under 300 W-9 mm/s.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Health Science and Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China

Institute of Manufacturing Technology, Guangdong University of Technology, Guangzhou 510006, China

Funding

National Natural Science Foundation of China · Ministry of Science and Technology—digital medical equipment R&D

References (36)

Show source-provided references
1. Wang, Q., Han, P., Yin, S., Niu, W.-J., Zhai, L., Li, X., Mao, X., and Han, Y. (2021). Current Research Status on Cold Sprayed Amorphous Alloy Coatings: A Review. Coatings, 11.10.3390/coatings11020206 ↗
2. Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD10.1016/j.msea.2023.144946 ↗
3. Single- and Multistage Crystallization of Amorphous Alloys10.1134/S0031918X20070108 ↗
4. Physical Properties of High-Cobalt Amorphous Alloys10.15407/mfint.43.12.1601 ↗
5. Bulk Metallic Glasses for Implantable Medical Devices and Surgical Tools10.1002/adma.201505347 ↗
6. Biocompatibility of platinum-based bulk metallic glass in orthopedic applications10.1088/1748-605X/abf981 ↗
7. Thin film metallic glasses for bioimplants and surgical tools: A review10.1016/j.jallcom.2021.159939 ↗
8. Can an amorphous alloy crystallize into a high entropy alloy?10.1088/1361-651X/ac2d9f ↗
9. Nanomanufacturing of Non-Noble Amorphous Alloys for Electrocatalysis10.1021/acsaem.0c02221 ↗
10. Nanoscale Clusters and Heterogeneities in Engineering and Amorphous Alloys10.1017/S1431927622003312 ↗
11. Recent Developments and Research Progress on Friction Stir Welding of Titanium Alloys: An Overview10.1088/1757-899X/330/1/012068 ↗
12. Investigation on the Effect of Friction Welding Parameters on Impact Strength in Dissimilar Joints10.1088/1757-899X/197/1/012069 ↗
13. Joining of bulk metallic glass to brass by thick-walled cylinder explosion10.1016/j.scriptamat.2014.10.027 ↗
14. Experimental Study on the Explosive Welding of Thin Al/Cu Composite Plates10.4028/www.scientific.net/MSF.910.52 ↗
15. Electron beam brazing of Zr62Al13Ni7Cu18 bulk metallic glass with Ti metal10.1016/j.vacuum.2013.07.010 ↗
16. Qiao, J., Yu, P., Wu, Y., Chen, T., Du, Y., and Yang, J. (2020). A Compact Review of Laser Welding Technologies for Amorphous Alloys. Metals, 10.10.3390/met10121690 ↗
17. Development of Laser Fabrication Technology for Amorphous Alloys
18. Caiazzo, F., and Caggiano, A. (2018). Investigation of Laser Welding of Ti Alloys for Cognitive Process Parameters Selection. Materials, 11.10.3390/ma11040632 ↗
19. Dissimilar laser spot welding of aluminum alloy to steel in keyhole mode
20. Sun, J. (2022, January 17–19). Mechanical manufacturing technology and precision machining technology. Proceedings of the Second International Conference on Cloud Computing and Mechatronic Engineering (I3CME 2022), Chendu, China.10.1117/12.2655013 ↗
21. Bulk metallic glass formation near intermetallic composition through liquid quenching10.1063/1.3168411 ↗
22. Glass forming properties of Zr-based bulk metallic alloys10.1016/S0022-3093(02)01876-8 ↗
23. Corrosion behavior and mechanical properties of Vit1 metallic glasses prepared at different cooling rates10.1016/j.jallcom.2022.167848 ↗
24. Ghosh, P.S., Sen, A., Chattopadhyaya, S., Sharma, S., Singh, J., Dwivedi, S.P., Saxena, A., Khan, A.M., Pimenov, D.Y., and Giasin, K. (2021). Prediction of Transient Temperature Distributions for Laser Welding of Dissimilar Metals. Appl. Sci., 11.10.3390/app11135829 ↗
25. Influence of Laser Pulse Welding Power on Welding Joints of Zr-Based Amorphous Alloys10.1002/crat.202200063 ↗
26. Crystallization of Zr55Cu30Al10Ni5 Bulk Metallic Glass in Laser Welding: Simulation and Experiment10.1002/adem.201400145 ↗
27. Evaluation of the thermal stability of Nd60Al20Co20 bulk metallic glass10.1063/1.2713179 ↗
28. Thermal stability of the Al70Ni10Ti10Zr5Ta5 amorphous alloy powder fabricated by mechanical alloying10.1016/j.jallcom.2010.02.003 ↗
29. Kinetics and thermal stability of the Ni62Nb38–xTax(x=5, 10, 15, 20 and 25) bulk metallic glasses10.1007/s11433-017-9030-4 ↗
30. Thermodynamic calculation and thermal stability of Al-Y-Ce-Ni metallic glass10.1088/2053-1591/aaaaf1 ↗
31. Effect of room temperature ageing on structure and thermal stability of as-cast and deformed Pd40Ni40P20 metallic glass10.1142/S0217979218502259 ↗
32. A highly glass-forming alloy with low glass transition temperature10.1063/1.1588367 ↗
33. Long-term thermal stability of binary Cu50.3Zr49.7 bulk metallic glass10.1088/0256-307X/25/1/082 ↗
34. Non-isothermal crystallization kinetics of Zr41.2Ti13.8Cu12.5Ni10Be22.5 amorphous alloy10.1016/j.tca.2014.04.009 ↗
35. Thermal diffusivity and conductivity of supercooled liquid in Zr41Ti14Cu12Ni10Be23 metallic glass10.1063/1.1759768 ↗
36. Laser welding of annealed Zr55Cu30Ni5Al10 bulk metallic glass10.1016/j.intermet.2013.11.008 ↗