Characteristics of copper-clad aluminum rods prepared by horizontal continuous casting
Source abstract
Abstract
An innovative horizontal continuous casting method was developed and successfully used to prepare copper-clad aluminum (CCA) rods with a diameter of 85 mm and a sheath thickness of 16 mm. The solidification structure and element distribution near the interface of the CCA ingots were investigated by means of a scanning electron microscope, an energy dispersive spectrometer, and an electron probe X-ray microanalyzer. The results showed that the proposed process can lead to a good metallurgical bond between Cu and Al. The interface between Cu and Al was a multilayered structure with a thickness of 200 μm, consisting of Cu9Al4, CuAl2, α-Al/CuAl2 eutectic, and α-Al + α-Al/CuAl2 eutectic layers from the Cu side to the Al side. The mean tensile-shear strength of the CCA sample was 45 MPa, which fulfills the requirements for the further extrusion process. The bonding and diffusion mechanisms are also discussed in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. J. K. Kim and T. X. Yu, J. Mater. Process. Tech. 63, 33 (1997).10.1016/S0924-0136(96)02596-4 ↗
2. S. Mroz, G. Stradomski, H. Dyja, and A. Galka, Arch. Civ. Mech. Eng. 15, 317 (2015).10.1016/j.acme.2014.12.003 ↗
3. M. X. Xie, L. J. Zhang, G. F. Zhang, J. X. Zhang, Z. Y. Bi, and P. C. Li, Mater. Design 87, 181 (2015).10.1016/j.matdes.2015.08.021 ↗
4. K. S. Lee, S. Lee, J. S. Lee, Y. B. Kim, G. A. Lee, D. S. Bae, et al. Met. Mater. Int. 22, 849 (2016).10.1007/s12540-016-6245-9 ↗
5. M. M. Hoseini-Athar and B. Tolaminejad, Met. Mater. Int. 22, 670 (2016).10.1007/s12540-016-5687-4 ↗
6. P. Eslami, A. K. Taheri, and M. Zebardast, J. Mater. Eng. Perform. 22, 3014 (2013).10.1007/s11665-013-0591-2 ↗
7. N. Li, S. R. Guo, D. Z. Lu, Z. Q. Hu, and J. L. Wen, J. Mater. Sci. Technol. 18, 187 (2002).10.1179/026708301225000563 ↗
8. E. Takeuchi, M. Zeze, H. Tanaka, H. Harada, and S. Mizoguchi, Ironmak. Steelmak. 24, 257 (1997).
9. K. Y. Rhee, W. Y. Han, H. J. Park, and S. S. Kim, Mat. Sci. Eng. A 384, 70 (2004).10.1016/j.msea.2004.05.051 ↗
10. L. I. Xiao-Bing, Z. U. Guo-Yin, and P. Wang, T. Nonferr. Metal. Soc. 25, 36 (2015).10.1016/S1003-6326(15)63576-2 ↗
11. Y. Fu, J. Jie, L. Wu, J. Park, J. Sun, T. Li, et al. Mat. Sci. Eng. A 561, 239 (2013).10.1016/j.msea.2012.10.092 ↗
12. H. X. Jiang, H. T. Zhang, K. Qin, and J. Z. Cui, T. Nonferr. Metal. Soc. 21, 1692 (2011).10.1016/S1003-6326(11)60916-3 ↗
13. J. C. Benedyk, Light Met. Age 64, 48 (2006).
14. W. Zhang, G. Zou, C. Deng, X. Wei, and X. U. Linkang, Acta Metall. Sin. 34, 609 (1998).
15. N. F. Neumann, U. S. Patent 3421569 (1969).
16. Y. J. Su, X. H. Liu, H. Y. Huang, X. F. Liu, and J. X. Xie, Metall. Mater. Trans. A 42, 4088 (2011).10.1007/s11661-011-0785-x ↗
17. Y. J. Su, X. H. Liu, H. Y. Huang, C. J. Wu, X. F. Liu, and J. X. Xie, Metall. Mater. Trans. B 42, 104 (2011).10.1007/s11663-010-9449-2 ↗
18. Z. Yan, X. Li, K. Qi, Z. Cao, X. Zhang, and T. Li, Mater. Design 30, 2072 (2009).10.1016/j.matdes.2008.08.047 ↗
19. N. Liu, J. Jie, Y. Lu, L. Wu, Y. Fu, and T. Li, J. Mater. Process. Tech. 214, 60 (2014).10.1016/j.jmatprotec.2013.05.022 ↗
20. L. Wu, H. Kang, Z. Chen, N. Liu, and T. Wang, T. Nonferr. Metal. Soc. 25, 2675 (2015).10.1016/S1003-6326(15)63891-2 ↗