journal article·2021-09

Structure Modification of a Rheocast Aluminum–Zinc Alloy by Friction Stir Butt Welding: Microstructural Evolution

Alireza Karimnejad, Mehrdad Ashjari, Akbar Heidarzadeh, Tohid Saeid

Publisher page

Abstract

In this study, friction stir butt welding was applied to weld an aluminum–zinc alloy produced by semi-solid method (rheocasting). For this aim, the effect of tool rotational and traverse speeds on the microstructure was investigated. The microstructures of the processed materials were studied using optical microscopy, scanning electron microscopy equipped with energy dispersive spectroscopy, and X-ray diffraction. The Vickers hardness test was used to evaluate the hardness of the joints. The results showed that the friction stir welding using optimum parameters improved the structure of the rheocast alloy. The porosities were eliminated due to severe plastic deformation induced to the material, which caused filling the voids. Friction stir welding lead to replacement of the semi-solid structure by finer equiaxed grains, which are formed by continuous dynamic recrystallization mechanism. High rotational speeds and low traverse speeds (high heat inputs) caused formation of larger grains, due to grain growth at higher temperatures. On the other hand, at high heat inputs the eutectic phases were more scattered throughout the microstructure, and super saturated solid solution was formed. Because of this behavior, the relationship between the hardness and grain size of the joints did not follow the classical Hall–Petch equation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. T.C. Lowe, R.Z. Valiev, Investigations and Applications of Severe Plastic Deformation (Kluwer Academic Publishers, Dordrecht, 1999)
2. A.H. Yan Beygelzimer, R. Kulagin, L. Olejnik, D. Orlov, R. Pippan, J. Richert, A. Rosochowski, V. Segal, N. Tsuji, V. Varyukhin, in Severe Plastic Deformation Technology, ed. by A. Rosochowski (Whittles Publishing, Dunbeath, 2017), p. 273
3. M. Ashjari, A.M. Asl, S. Rouhi, Experimental investigation on the effect of process environment on the mechanical properties of AA5083/Al2O3 nanocomposite fabricated via friction stir processing. Mater. Sci. Eng. A 645, 40–46 (2015)10.1016/j.msea.2015.07.093 ↗
4. P. Motalleb-nejad et al., Effect of tool pin profile on microstructure and mechanical properties of friction stir welded AZ31B magnesium alloy. Mater. Des. 59, 221–226 (2014)10.1016/j.matdes.2014.02.068 ↗
5. T. Anderson, C., FWeldI, CWEng, Welding Aluminum—Questions and Answers, ed. A.P.D. Committee. Vol. 2. American Welding society, (2010), p. 258
6. R.S.M.A.H. Sidhar, Friction Stir Welding of 2XXX Aluminum Alloys Including Al-Li Alloys (Joe Hayton, Boston, 2017), p. 102
7. R.S.M.A.M. Komarasamy, Friction Stir Welding of High-Strength 7XXX Aluminum Alloys (Butterworth-Heinemann, Oxford, 2016), p. 113
8. G. Çam et al., Characterisation of electron beam welded aluminium alloys. Sci. Technol. Weld. Join. 4(5), 317–323 (1999)10.1179/136217199101537941 ↗
9. G. Çam, M. Koçak, Microstructural and mechanical characterization of electron beam welded Al-alloy 7020. J. Mater. Sci. 42(17), 7154–7161 (2007)10.1007/s10853-007-1604-z ↗
10. R.S. Mishra, M.W. Mahoney, Friction Stir Welding and Processing (ASM International, Pine Mountain, 2007), p. 333
11. Z.C. Daniela Lohwasser, K.J. Colligan, R. Zettler, T. Zappia, Friction Stir Welding, From Basics to Applications (CRC Press and Woodhead Publishing Limited, Boca Raton, 2010), p. 42810.1533/9781845697716 ↗
12. F.C.L. Paul Goetze, M. Thomä, T. Wang, J. Martin, P. Sahlot et al., Friction Stir Welding and Processing X (Springer, Berlin, 2019)
13. N.Z. Khan, A.N. Siddiquee, Z.A. Khan, Friction Stir Welding, Dissimilar Aluminum Alloys (CRC Press Taylor & Francis Group, Boca Raton, 2017), p. 18110.1201/9781315116815 ↗
14. H.L. Saunders, MIG/MAG Welding Guide, For Gas Metal Arc Welding (GMAW), vol. 3 (American Society for Metals, Cleveland, 1997)
15. C.B. Smith, R.S. Mishra, Friction Stir Processing for Enhanced Low Temperature Formability (Elsevier, Amsterdam, 2014), p. 146
16. R.S. Mishra, P.S. De, N. Kumar, Friction Stir Welding and Processing (Springer, Berlin, 2014), p. 34710.1007/978-3-319-07043-8 ↗
17. E. Cetkin, Y.H. Çelik, S. Temiz, Microstructure and mechanical properties of AA7075/AA5182 jointed by FSW. J. Mater. Process. Technol. 268, 107–116 (2019)10.1016/j.jmatprotec.2019.01.005 ↗
18. A. Barbini, J. Carstensen, J.F. dos Santos, Influence of a non-rotating shoulder on heat generation, microstructure and mechanical properties of dissimilar AA2024/AA7050 FSW joints. J. Mater. Sci. Technol. 34(1), 119–127 (2018)10.1016/j.jmst.2017.10.017 ↗
19. D. Texier et al., Fatigue performances of FSW and GMAW aluminum alloys welded joints: competition between microstructural and structural-contact-fretting crack initiation. Int. J. Fatigue 116, 220–233 (2018)10.1016/j.ijfatigue.2018.06.020 ↗
20. N. Kashaev, V. Ventzke, G. Çam, Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications. J. Manuf. Process. 36, 571–600 (2018)10.1016/j.jmapro.2018.10.005 ↗
21. G. Çam, G. İpekoğlu, Recent developments in joining of aluminum alloys. Int. J. Adv. Manuf. Technol. 91(5), 1851–1866 (2017)10.1007/s00170-016-9861-0 ↗
22. G. Çam, Friction stir welded structural materials: beyond Al-alloys. Int. Mater. Rev. 56(1), 1–48 (2011)10.1179/095066010X12777205875750 ↗
23. G. Çam, G. İpekoğlu, H. Tarık Serindağ, Effects of use of higher strength interlayer and external cooling on properties of friction stir welded AA6061-T6 joints. Sci. Technol. Weld. Join. 19(8), 715–720 (2014)10.1179/1362171814Y.0000000247 ↗
24. G. İpekoğlu, G. Çam, Effects of initial temper condition and postweld heat treatment on the properties of dissimilar friction-stir-welded joints between AA7075 and AA6061 aluminum alloys. Metall. Mater. Trans. A 45(7), 3074–3087 (2014)10.1007/s11661-014-2248-7 ↗
25. G. İpekoğlu, S. Erim, G. Çam, Investigation into the influence of post-weld heat treatment on the friction stir welded AA6061 Al-alloy plates with different temper conditions. Metall. Mater. Trans. A 45(2), 864–877 (2014)10.1007/s11661-013-2026-y ↗
26. G. İpekoğlu, S. Erim, G. Çam, Effects of temper condition and post weld heat treatment on the microstructure and mechanical properties of friction stir butt-welded AA7075 Al alloy plates. Int. J. Adv. Manuf. Technol. 70(1), 201–213 (2014)10.1007/s00170-013-5255-8 ↗
27. B. Zhu, C. Zanella, Hardness and corrosion behaviour of anodised Al–Si produced by rheocasting. Mater. Des. 173, 107764 (2019)10.1016/j.matdes.2019.107764 ↗
28. M.C. Flemings, R.G. Riek, K.P. Young, Rheocasting. Mater. Sci. Eng. 25, 103–117 (1976)10.1016/0025-5416(76)90057-4 ↗
29. D.H. Kirkwood, P. Kapranos, Semisolid Processing, in Reference Module in Materials Science and Materials Engineering (Elsevier, Amsterdam, 2016)
30. R. Canyook et al., The effects of heat treatment on microstructure and mechanical properties of rheocasting ADC12 aluminum alloy. Mater. Today Proc. 5(3, Part 2), 9476–9482 (2018)10.1016/j.matpr.2017.10.127 ↗
31. A.K. Dey et al., Mechanical and wear properties of rheocast and conventional gravity die cast A356 alloy. Mater. Sci. Eng. A 435–436, 521–529 (2006)10.1016/j.msea.2006.07.148 ↗
32. P. Falak, B. Niroumand, Rheocasting of an Al–Si alloy. Scr. Mater. 53(1), 53–57 (2005)10.1016/j.scriptamat.2005.03.017 ↗
33. S.C. Lim et al., The tribological properties of Al–Cu/SiCp metal–matrix composites fabricated using the rheocasting technique. J. Mater. Process. Technol. 89–90, 591–596 (1999)10.1016/S0924-0136(99)00067-9 ↗
34. C. Lin et al., Dry sliding wear behavior of rheocast hypereutectic Al–Si alloys with different Fe contents. Trans. Nonferrous Met. Soc. China 26(3), 665–675 (2016)10.1016/S1003-6326(16)64156-0 ↗
35. B. Mingo et al., 3D study of intermetallics and their effect on the corrosion morphology of rheocast aluminium alloy. Mater. Charact. 112, 122–128 (2016)10.1016/j.matchar.2015.12.006 ↗
36. H. Mirzadeh, B. Niroumand, Fluidity of Al–Si semisolid slurries during rheocasting by a novel process. J. Mater. Process. Technol. 209(11), 4977–4982 (2009)10.1016/j.jmatprotec.2009.01.020 ↗
37. B. Niroumand, K. Xia, 3D study of the structure of primary crystals in a rheocast Al–Cu alloy. Mater. Sci. Eng. A 283(1), 70–75 (2000)10.1016/S0921-5093(00)00619-5 ↗
38. E.J. Zoqui, Morphological analysis of SSM Al–4.1wt.% Cu measured by the rheocast quality index. J. Mater. Process. Technol. 143–144, 195–201 (2003)10.1016/S0924-0136(03)00418-7 ↗
39. U.A. Curle, Semi-solid near-net shape rheocasting of heat treatable wrought aluminum alloys. Trans. Nonferrous Met. Soc. China 20(9), 1719–1724 (2010)10.1016/S1003-6326(09)60364-2 ↗
40. H.-M. Guo et al., Effects of rheoforming on microstructures and mechanical properties of 7075 wrought aluminum alloy. Trans. Nonferrous Met. Soc. China 20(3), 355–360 (2010)10.1016/S1003-6326(09)60146-1 ↗
41. S. Sandhya, R. Mahemaa, G. Phanikumar, Microstructure evolution during fusion welding of rheocast AA7075 alloy. Proc. Mater. Sci. 5, 408–415 (2014)10.1016/j.mspro.2014.07.283 ↗
42. A. Pola, M. Tocci, P. Kapranos, Microstructure and properties of semi-solid aluminum alloys: a literature review. Metals 8(3), 181 (2018)10.3390/met8030181 ↗
43. C. Xu et al., Effects of injection velocity on microstructure, porosity and mechanical properties of a rheo-diecast Al–Zn–Mg–Cu aluminum alloy. J. Mater. Process. Technol. 249, 167–171 (2017)10.1016/j.jmatprotec.2017.05.033 ↗
44. N.E. Mazibuko, U.A. Curle, Effect of Solution Heat Treatment Time on a Rheocast Al–Zn–Mg–Cu Alloy, Materials Science Forum (Trans Tech Publ, Zurich, 2011)
45. R.S. Mishra, Z.Y. Ma, Friction stir welding and processing. Mater. Sci. Eng. R Rep. 50(1), 1–78 (2005)10.1016/j.mser.2005.07.001 ↗
46. H. Zhang, H. Liu, Characteristics and formation mechanisms of welding defects in underwater friction stir welded aluminum alloy. Metallogr. Microstruct. Anal. 1(6), 269–281 (2012)10.1007/s13632-012-0038-4 ↗
47. G. Huang et al., Fabrication of tungsten particles reinforced aluminum matrix composites using multi-pass friction stir processing: evaluation of microstructural, mechanical and electrical behavior. Mater. Sci. Eng. A 674, 504–513 (2016)10.1016/j.msea.2016.07.124 ↗
48. G. Huang et al., Development of surface composite based on Al–Cu system by friction stir processing: evaluation of microstructure, formation mechanism and wear behavior. Surf. Coat. Technol. 344, 30–42 (2018)10.1016/j.surfcoat.2018.03.005 ↗
49. W.-B. Lee, S.-B. Jung, The joint properties of copper by friction stir welding. Mater. Lett. 58(6), 1041–1046 (2004)10.1016/j.matlet.2003.08.014 ↗
50. M. Riahi, H. Nazari, Analysis of transient temperature and residual thermal stresses in friction stir welding of aluminum alloy 6061-T6 via numerical simulation. Int. J. Adv. Manuf. Technol. 55(1), 143–152 (2011)10.1007/s00170-010-3038-z ↗
51. A.L. Etter et al., Recrystallization mechanisms in 5251 H14 and 5251 O aluminum friction stir welds. Mater. Sci. Eng. A 445–446, 94–99 (2007)10.1016/j.msea.2006.09.036 ↗
52. K.V. Jata, S.L. Semiatin, Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys. Scr. Mater. 43(8), 743–749 (2000)10.1016/S1359-6462(00)00480-2 ↗
53. T.R. McNelley, S. Swaminathan, J.Q. Su, Recrystallization mechanisms during friction stir welding/processing of aluminum alloys. Scr. Mater. 58(5), 349–354 (2008)10.1016/j.scriptamat.2007.09.064 ↗
54. Y.G. Kim et al., Three defect types in friction stir welding of aluminum die casting alloy. Mater. Sci. Eng. A 415(1), 250–254 (2006)10.1016/j.msea.2005.09.072 ↗
55. S.M.L. Sastry, The effect of grain size on yield stress and work hardening in Cu3Au. Mater. Sci. Eng. 22, 237–243 (1976)10.1016/0025-5416(76)90160-9 ↗
56. G. Çam, S. Mistikoglu, M. Pakdil, Microstructural and mechanical characterization of friction stir butt joint welded 63% Cu–37% Zn brass plate. Weld. J. 88(11), 225–232 (2009)
57. G. Çam et al., The effect of weld parameters on friction stir welding of brass plates. Materialwiss. Werkstofftech. 39(6), 394–399 (2008)10.1002/mawe.200800314 ↗
58. T. Küçükömeroğlu et al., Microstructural and mechanical properties of friction stir welded nickel-aluminum bronze (NAB) alloy. J. Mater. Eng. Perform. 25(1), 320–326 (2016)10.1007/s11665-015-1838-x ↗
59. W. Hoziefa et al., Influence of friction stir processing on the microstructure and mechanical properties of a compocast AA2024-Al2O3 nanocomposite. Mater. Des. 106, 273–284 (2016)10.1016/j.matdes.2016.05.114 ↗
60. M. Dadashpour et al., Effect of process parameter on mechanical properties and fracture behavior of AZ91C/SiO2 composite fabricated by FSP. Mater. Sci. Eng. A 655, 379–387 (2016)10.1016/j.msea.2015.12.103 ↗
61. X.H. Zeng et al., Achieving an ultra-high strength in a low alloyed Al alloy via a special structural design. Mater. Sci. Eng. A 755, 28–36 (2019)10.1016/j.msea.2019.03.126 ↗
62. Y.G. Kim et al., Effect of welding parameters on microstructure in the stir zone of FSW joints of aluminum die casting alloy. Mater. Lett. 60(29), 3830–3837 (2006)10.1016/j.matlet.2006.03.123 ↗
63. R.E. Reed-Hill, R. Abbaschian, R. Abbaschian, Physical Metallurgy Principles (Van Nostrand, New York, 1973)
64. E.R. Wang, X.D. Hui, G.L. Chen, Eutectic Al–Si–Cu–Fe–Mn alloys with enhanced mechanical properties at room and elevated temperature. Mater. Des. 32(8), 4333–4340 (2011)10.1016/j.matdes.2011.04.005 ↗