Towards optimised wireless Love wave biosensor with high sensitivity
Source abstract
Abstract
A Love wave biosensor, which is composed of a one-port surface acoustic wave reflective delay line on a piezoelectric substrate, a thin overlayer (waveguide layer) on top of the substrate, and a sensitive film that responds only to a specific cell, was optimally designed on a 41° YX LiNbO3 substrate and then fabricated according to the extracted design parameters. Based on multilayer theory, polymethylmethacrylate waveguide thickness was optimised. For derivation of the coupling of mode parameters, the periodic using the periodic finite-element method/boundary element method modelling was utilised. Optimal interdigital transducers and reflectors' features were determined to realise high-quality reflection peaks. The experimentally measured reflection coefficient S11 showed good agreement with simulated results. The evaluated sensitivity was 11.5 deg/µg/ml in terms of anti-DNP immunoglobulin G absorption.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies · Mechanical and Optical Resonators · Advanced MEMS and NEMS Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electronics Engineering, Ajou University, Suwon, 443-749, Republic of Korea
References
Reference metadata was not supplied for this record.