Source abstract
Abstract
The experimental observation of the transformation of nanosized SAC (Sn3.0Ag0.5Cu) into bulk‐sized SAC during the melting process involving a large melting‐point depression, using DSC (differential scanning calorimetry) and the reflow test is documented. They manufactured the nanosized SAC in dielectric benzyl alcohol using the modified direct‐current arc method. The nanoparticles were spherical in shape with a size distribution of 5–10 nm. Using DSC, the endothermic peaks were continuously measured twice without changing the nanosized SAC. During the initial measurement, they observed peaks at 133, 162 and 217°C. However, in the second cycle, they observed only one peak at 217°C, which indicates the SAC nanoparticles have been completely melted and changed into bulk‐sized SAC in the first cycle. They first conducted a reflow test of the SAC nanoparticles suspended in benzyl alcohol including flux on a printed circuit board and a hot plate which are 170°C. It was observed that SAC nanoparticles were transformed into bulk‐sized SAC during the melting process at 170°C in less than 3 min. After the melting process, they also observed the formation of thin‐layer geometry of SAC with 100 nm and intermetallic Cu 6 Sn 5 between the SAC thin layer and a copper plate on PCB.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: nanoparticles nucleation surface interactions · Solidification and crystal growth phenomena · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Quality Management Bureau Defense Agency for Technology and Quality Changwon Si Gyeongsangnam‐do 51474 Republic of Korea
School of Aerospace and Mechanical Engineering Korea Aerospace University Goyang Gyeonggi‐do 412‐791 Republic of Korea
Department of Materials Science and Engineering Seoul National University of Science and Technology Seoul 139‐743 Republic of Korea
Technology Planning Bureau Defense Agency for Technology and Quality Jinju Si Gyeongsangnam‐do 52851 Republic of Korea
Funding
National Research Foundation of Korea
References (17)
Show source-provided references
16. Synthesis and characterization of highly conductive Sn‐Ag bimetallic nanoparticles for printed electronics