Mechanical Behavior of Nanocluster-Based Nanocomposites Made Using Two-Photon Lithography
Source abstract
Abstract
Mechanical metamaterials with nanoscale features exhibit exceptional properties, including high specific strength, modulus, energy absorption, and recoverability. The ability to fabricate these metamaterials out of complex nanocomposites could further boost their mechanical properties. Recently, two-photon lithography (TPL) has been used to fabricate architected microlattices out of high-performance polymer nanocomposites that contain metallic nanoclusters. However, the mechanism that leads to unique mechanical properties of the nanocomposites, such as high strain hardening, remains unclear. Here, TPL is used to fabricate nanocluster-based polymer nanocomposite micropillars and investigate how nanocluster content and chemical bonding with the polymer matrix impact their mechanical properties. The nanocomposites are tested in compression at strain rates of 10 –3 to 10 2 s –1, and after heat treatment up to 550 °C. Findings show that nanoclusters establish hydrogen bonds and exhibit strong interfacial bonding with the polymer, restricting polymer chain movement and significantly enhancing mechanical strength compared to unfilled polymers.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nonlinear Optical Materials Studies · Polymer Nanocomposite Synthesis and Irradiation · Liquid Crystal Research Advancements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering
Stanford University
Massachusetts Institute of Technology
Materials Department
University of California
Funding
U.S. Department of Defense · Basic Energy Sciences · Stanford University · American Chemical Society · National Science Foundation
References (64)
Show source-provided references
1. 10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
2. 10.1021/acsami.9b2091110.1021/acsami.9b20911 ↗
3. 10.1016/j.mee.2017.12.01010.1016/j.mee.2017.12.010 ↗
4. 10.1155/2008/49305910.1155/2008/493059 ↗
5. 10.3390/mi1304064210.3390/mi13040642 ↗
6. 10.1063/1.491688610.1063/1.4916886 ↗
7. 10.1126/science.aax876010.1126/science.aax8760 ↗
8. 10.1364/OL.22.00013210.1364/OL.22.000132 ↗
9. 10.1063/1.217763610.1063/1.2177636 ↗
10. 10.1126/science.abo534510.1126/science.abo5345 ↗
11. 10.1126/science.adg668110.1126/science.adg6681 ↗
12. Bauer, J.; Crook, C.; Baldacchini, T.A sinterless, low-temperature route to 3D print nanoscale optical-grade glass Science20233806648960966https://www.science.org/doi/10.1126/science.abq3037. 10.1126/science.abq3037.10.1126/science.abq3037 ↗
13. 10.1557/adv.2018.64810.1557/adv.2018.648 ↗
14. 10.1002/adma.20190134510.1002/adma.201901345 ↗
15. 10.1016/j.carbon.2022.09.01610.1016/j.carbon.2022.09.016 ↗
16. Li, Q.; Kulikowski, J.; Doan, D.; Tertuliano, O. A.; Zeman, C. J.; Wang, M. M.; Schatz, G. C.; Gu, X. W.Mechanical nanolattices printed using nanocluster-based photoresists Science20223786621768773https://www.science.org/doi/10.1126/science.abo6997. 10.1126/science.abo6997.10.1126/science.abo6997 ↗
17. 10.1016/j.carbon.2013.03.02010.1016/j.carbon.2013.03.020 ↗
18. 10.1016/j.mattod.2020.10.00310.1016/j.mattod.2020.10.003 ↗
19. 10.1021/acs.nanolett.8b0124110.1021/acs.nanolett.8b01241 ↗
20. 10.1038/s41563-021-01125-w10.1038/s41563-021-01125-w ↗
21. 10.1021/acs.nanolett.7b0323810.1021/acs.nanolett.7b03238 ↗
22. 10.1002/adma.20221170210.1002/adma.202211702 ↗
23. 10.1002/adma.20100054210.1002/adma.201000542 ↗
24. 10.1002/anie.20240364510.1002/anie.202403645 ↗
25. 10.1016/j.polymer.2005.08.07910.1016/j.polymer.2005.08.079 ↗
26. 10.1002/adma.20240008010.1002/adma.202400080 ↗
27. 10.1016/j.compositesa.2011.08.00510.1016/j.compositesa.2011.08.005 ↗
28. 10.1016/j.compscitech.2012.05.00510.1016/j.compscitech.2012.05.005 ↗
29. 10.1016/j.nanoms.2019.02.00610.1016/j.nanoms.2019.02.006 ↗
30. 10.1177/0731684422114164310.1177/07316844221141643 ↗
31. 10.1016/0022-5096(63)90060-710.1016/0022-5096(63)90060-7 ↗
32. 10.1063/1.170749510.1063/1.1707495 ↗
33. 10.1002/pen.76016051210.1002/pen.760160512 ↗
34. 10.1016/j.polymer.2015.11.03910.1016/j.polymer.2015.11.039 ↗
35. 10.3390/polym1403036010.3390/polym14030360 ↗
36. Münstedt, H.Melt strain hardening of polymeric systems filled with solid particles: review and supplementary experimental results Rheol. Acta202463333343https://link.springer.com/article/10.1007/s00397-024-01452-0. 10.1007/s00397-024-01452-0.10.1007/s00397-024-01452-0 ↗
37. 10.1021/acsmacrolett.0c0052510.1021/acsmacrolett.0c00525 ↗
38. 10.1021/jacsau.1c0043010.1021/jacsau.1c00430 ↗
39. 10.1016/j.polymer.2022.12494410.1016/j.polymer.2022.124944 ↗
40. 10.1016/S0266-3538(00)00133-010.1016/S0266-3538(00)00133-0 ↗
41. 10.1016/j.engfracmech.2024.10992410.1016/j.engfracmech.2024.109924 ↗
42. 10.1007/s12274-018-2216-410.1007/s12274-018-2216-4 ↗
43. 10.1016/j.compscitech.2005.12.02810.1016/j.compscitech.2005.12.028 ↗
44. 10.1021/acsnano.6b0717210.1021/acsnano.6b07172 ↗
45. 10.1007/BF0173060510.1007/BF01730605 ↗
46. 10.1021/nl301792g10.1021/nl301792g ↗
47. 10.1016/j.matdes.2020.10897710.1016/j.matdes.2020.108977 ↗
48. 10.1016/B0-08-043152-6/01306-110.1016/B0-08-043152-6/01306-1 ↗
49. 10.1002/polb.2197910.1002/polb.21979 ↗
50. 10.1016/j.eml.2016.04.01410.1016/j.eml.2016.04.014 ↗
51. 10.1016/j.carbon.2023.03.06110.1016/j.carbon.2023.03.061 ↗
52. 10.1038/s41565-019-0486-y10.1038/s41565-019-0486-y ↗
53. 10.1016/j.tca.2011.02.03110.1016/j.tca.2011.02.031 ↗
54. 10.1007/s11120-009-9439-x10.1007/s11120-009-9439-x ↗
55. 10.3390/molecules2204055210.3390/molecules22040552 ↗
56. 10.1002/jbm.a.3144810.1002/jbm.a.31448 ↗
57. 10.1002/admt.20190014610.1002/admt.201900146 ↗
58. 10.1016/j.progpolymsci.2009.07.00210.1016/j.progpolymsci.2009.07.002 ↗
59. 10.1039/C4PY00550C10.1039/C4PY00550C ↗
60. 10.1007/s11224-010-9584-z10.1007/s11224-010-9584-z ↗
61. 10.1021/acs.nanolett.6b0076610.1021/acs.nanolett.6b00766 ↗
62. 10.1021/acsami.2c1243610.1021/acsami.2c12436 ↗
63. 10.1021/acs.macromol.3c0256510.1021/acs.macromol.3c02565 ↗
64. 10.1016/j.compositesb.2017.04.00810.1016/j.compositesb.2017.04.008 ↗