journal article·2025-06-18

Robust Plasmonic Structures Fabricated by Femtosecond Laser-Assisted Anisotropic Intaglio Engraving on Quartz for High-Sensitivity Surface Plasmon Resonance Sensing

Yibo Lu, Lan Jiang, Mengmeng Wang, Xin Li, Sumei Wang, Xueqiang Zhang, Bo Chen, Xiaorui Li, Chang Lu

ACS Applied Materials & Interfaces· Volume 17· Issue 24
Publisher page

Abstract

Fabrication of plasmonic structures on a gold film is a well-established approach to improve the performance of surface plasmon resonance (SPR) sensors. However, traditional fabrication techniques, such as photolithography, electron beam lithography (EBL), and focused ion beam (FIB) milling, often involve complex procedures and costly equipment. In this study, we present a mask-free, convenient method to fabricate robust plasmonic structures on the surface of z-cut α-quartz by combining femtosecond laser-induced modification with chemical etching for high-sensitivity Kretschmann configuration SPR sensing. We find that the etching process of laser-modified α-quartz in ammonium bifluoride (NH 4 HF 2 ) solution proceeds in two distinct stages: isotropic etching and anisotropic etching. By comparing the etching morphology of the craters ablated by femtosecond laser with wavelengths of 400 and 800 nm, we observe that due to the lower threshold fluence and steeper crater profile, the 400 nm laser can induce more pronounced anisotropic etching, leading to sharper inverted pyramid structures. A 5-nm-thick Cr film and a 50-nm-thick Au film are then deposited on the patterned quartz surface, which is used to detect the refractive indices (RIs) of glycerol solutions as an SPR sensor. The inverted pyramid structures can enhance the localized electric fields, causing a red shift of the resonance peak and thereby improving the sensitivity of the SPR sensor. The sensor demonstrates a sensitivity of 4662.21 nm/RIU, achieving a 21.51% improvement compared with a traditional SPR sensor with a plain Au film under the same light incident angle. The refractive index (RI) resolution reaches 2.7 × 10 –5 RIU, and the figure of merit (FOM) is 85.36 RIU –1 . Femtosecond laser-assisted chemical etching offers an efficient and convenient method for fabricating plasmonic structures on α-quartz. The high-sensitivity SPR sensors developed through this approach demonstrate promising potential for applications in fields such as medical diagnostics, disease detection, and environmental monitoring.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Plasmonic and Surface Plasmon Research · Photonic and Optical Devices · Optical Coatings and Gratings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laser Micro/Nano Fabrication Laboratory, School of Mechanical Engineering

Beijing Institute of Technology

Yangtze Delta Region Academy of Beijing Institute of Technology

Beijing Institute of Technology Chongqing Innovation Center

Funding

Natural Science Foundation of Chongqing Municipality · National Natural Science Foundation of China

References (57)

Show source-provided references
1. 10.1002/lpor.20220000910.1002/lpor.202200009 ↗
2. 10.1093/nsr/nwac10410.1093/nsr/nwac104 ↗
3. 10.1002/admi.20220220210.1002/admi.202202202 ↗
4. 10.3390/bios1303039610.3390/bios13030396 ↗
5. 10.1063/5.014249410.1063/5.0142494 ↗
6. 10.1016/j.ccr.2022.21442410.1016/j.ccr.2022.214424 ↗
7. 10.1038/s42003-020-01615-810.1038/s42003-020-01615-8 ↗
8. Homola, J.; Piliarik, M. In Surface Plasmon Resonance (SPR) Sensors; Homola, J., Ed. Springer: Berlin, Heidelberg, 2006; pp 45–67.10.1007/5346_014 ↗
9. 10.1002/advs.20210523110.1002/advs.202105231 ↗
10. 10.1155/2023/210291510.1155/2023/2102915 ↗
11. 10.3390/s2110349110.3390/s21103491 ↗
12. 10.1016/j.jhazmat.2023.13164410.1016/j.jhazmat.2023.131644 ↗
13. 10.1016/j.bios.2020.11283510.1016/j.bios.2020.112835 ↗
14. 10.1021/acs.analchem.3c0145110.1021/acs.analchem.3c01451 ↗
15. 10.1016/j.snb.2022.13281110.1016/j.snb.2022.132811 ↗
16. 10.1016/j.talanta.2022.12359910.1016/j.talanta.2022.123599 ↗
17. 10.1038/s41467-021-26652-710.1038/s41467-021-26652-7 ↗
18. 10.1016/j.rinp.2021.10439610.1016/j.rinp.2021.104396 ↗
19. 10.1364/BOE.47816410.1364/BOE.478164 ↗
20. 10.1021/jp408187e10.1021/jp408187e ↗
21. 10.1002/adom.20180126910.1002/adom.201801269 ↗
22. 10.1016/j.bios.2020.11268510.1016/j.bios.2020.112685 ↗
23. 10.1039/D0NR07020C10.1039/D0NR07020C ↗
24. 10.1109/JSEN.2021.313877010.1109/JSEN.2021.3138770 ↗
25. 10.1002/lpor.20230089110.1002/lpor.202300891 ↗
26. 10.1038/lsa.2017.13410.1038/lsa.2017.134 ↗
27. 10.1016/j.snb.2024.13679510.1016/j.snb.2024.136795 ↗
28. 10.1364/AO.53.00102810.1364/AO.53.001028 ↗
29. 10.1016/j.apsusc.2022.15444610.1016/j.apsusc.2022.154446 ↗
30. 10.1007/s00339-006-3603-310.1007/s00339-006-3603-3 ↗
31. 10.1515/nanoph-2021-062910.1515/nanoph-2021-0629 ↗
32. Kaiser, M.; Kumkar, M.; Leute, R.; Schmauch, J.; Priester, R.; Kleiner, J.; Jenne, M.; Flamm, D.; Zimmermann, F. In Selective Etching of Ultrafast Laser Modified Sapphire, Proceedings of the Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIV, 2019; p 14.10.1117/12.2509415 ↗
33. 10.1039/D3NR03750A10.1039/D3NR03750A ↗
34. 10.1038/s41566-018-0327-910.1038/s41566-018-0327-9 ↗
35. 10.1109/JMEMS.2018.285044210.1109/JMEMS.2018.2850442 ↗
36. 10.1364/OL.7.00019610.1364/OL.7.000196 ↗
37. 10.1007/s00339-002-1813-x10.1007/s00339-002-1813-x ↗
38. 10.1134/S106378341802008710.1134/S1063783418020087 ↗
39. 10.1016/j.vibspec.2019.02.00310.1016/j.vibspec.2019.02.003 ↗
40. 10.1364/OE.27.00644210.1364/OE.27.006442 ↗
41. 10.1063/1.221688210.1063/1.2216882 ↗
42. 10.1063/1.476567110.1063/1.4765671 ↗
43. 10.1088/0960-1317/3/2/00610.1088/0960-1317/3/2/006 ↗
44. Cheng D. · Sens. Mater. · 2005 · 17 · 179
45. Zhang, H.; Xing, Y.; Zhang, J.; Li, Y. The Microscopic Activation Energy Etching Mechanism in Anisotropic Wet Etching of Quartz, Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems, 2018; pp 471–474.10.1109/MEMSYS.2018.8346591 ↗
46. 10.1088/0960-1317/8/1/00110.1088/0960-1317/8/1/001 ↗
47. Cheng, D.; Sato, K.; Shikida, M.; Ono, A.; Sato, K.; Asaumi, K.; Iriye, Y. Development of quartz etching database and 3-D micromachining simulation system, MHS2003. Proceedings of 2003 International Symposium on Micromechatronics and Human Science, 2003; pp 281−285.
48. 10.1016/j.sna.2017.01.00810.1016/j.sna.2017.01.008 ↗
49. 10.17694/bajece.42880010.17694/bajece.428800 ↗
50. 10.1515/nanoph-2019-015810.1515/nanoph-2019-0158 ↗
51. 10.1021/acsnano.3c0500710.1021/acsnano.3c05007 ↗
52. 10.1088/1361-6528/aba57a10.1088/1361-6528/aba57a ↗
53. 10.1039/D0RA09012C10.1039/D0RA09012C ↗
54. 10.1016/j.snb.2021.13062910.1016/j.snb.2021.130629 ↗
55. 10.1002/adpr.20200000310.1002/adpr.202000003 ↗
56. 10.1016/j.optlastec.2023.10982510.1016/j.optlastec.2023.109825 ↗
57. 10.1002/smll.20190548010.1002/smll.201905480 ↗