journal article·2016-03

Heat removal capacity enhanced micropin array heatsink with optimised pin height and inlet–outlet positions

Dawei Yang, Guifu Ding, Yan Wang, Junhong Zhao, Guilian Wang

Micro & Nano Letters· Volume 11· Issue 3
Publisher page

Abstract

A micropin array heatsink with high heat removal capacity for its optimised pin height and inlet–outlet positions is presented. Computational fluid dynamics simulation indicates pin height has a big impact on the pressure difference and heat removal capacity. A decrease of 2.67°C of the maximum temperature was achieved when pin height increased from 200 to 500 µm. Meanwhile with the proper pin height, the different positions of inlet and outlet that the maximum temperature decreases 13.89°C, the best design compared with the worst design among 63 samples under the same working condition. The two typical samples were fabricated and tested through micromachining technology and an infrared imaging testing system. Experiment result preferably matches with the simulation result of the same variation trend of 5.8°C. The positions of inlet and outlet were proved to play an important role in enhancing the heat removal capacity of the micropin array heatsink.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Heat Transfer and Optimization · Heat Transfer and Boiling Studies · Heat Transfer Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Electronic Information and Electrical Engineering Shanghai Jiao Tong University Shanghai 200240 People's Republic of China

Funding

Major State Basic Research Development Program of China · National Natural Science Foundation of China

References (20)

Show source-provided references
1. ZhengJ.ZhangZ.ChenY.et al.: ‘3D stacked package technology and its application prospects’.Int. Conf. on New Trends in Information and Service Science 2009 pp.528–53310.1109/NISS.2009.100 ↗
2. Packing challenging and solution for multi‐stack die applications
3. 10.1080/01457632.2010.50639010.1080/01457632.2010.506390 ↗
4. 10.1016/j.applthermaleng.2006.02.03610.1016/j.applthermaleng.2006.02.036 ↗
5. 10.1109/6144.83304210.1109/6144.833042 ↗
6. 10.1016/j.ijheatmasstransfer.2012.02.03810.1016/j.ijheatmasstransfer.2012.02.038 ↗
7. 10.1016/j.ijheatmasstransfer.2013.04.00910.1016/j.ijheatmasstransfer.2013.04.009 ↗
8. 10.1088/0960‐1317/16/7/03710.1088/0960‐1317/16/7/037 ↗
9. 10.1109/EDL.1981.2536710.1109/EDL.1981.25367 ↗
10. 10.1016/j.ijheatmasstransfer.2013.07.03910.1016/j.ijheatmasstransfer.2013.07.039 ↗
11. 10.1016/S0894‐1777(02)00150‐410.1016/S0894‐1777(02)00150‐4 ↗
12. 10.1007/s10404‐005‐0064‐510.1007/s10404‐005‐0064‐5 ↗
13. 10.1016/j.ijheatmasstransfer.2012.02.05910.1016/j.ijheatmasstransfer.2012.02.059 ↗
14. 10.1115/1.402303510.1115/1.4023035 ↗
15. Numerical analysis on the heat transfer of heatsink with micro‐pin‐fins
16. 10.1080/10407782.2012.70943710.1080/10407782.2012.709437 ↗
17. 10.1016/j.ijheatmasstransfer.2012.03.02210.1016/j.ijheatmasstransfer.2012.03.022 ↗
18. 10.1007/s00231‐015‐1504‐810.1007/s00231‐015‐1504‐8 ↗
19. 10.1007/s00170‐015‐7049‐710.1007/s00170‐015‐7049‐7 ↗
20. 10.1016/j.ijthermalsci.2014.12.02110.1016/j.ijthermalsci.2014.12.021 ↗