journal article·2025-09-10

Scalable Roll-to-Roll Approach for Encapsulating Long-Length Flexible Printed Circuit Boards

Chan-Woo Lee, Eun-Ji Gwak, Doo-Sun Choi, Byoung-Youn Cho, Jun Sae Han

ACS Applied Materials & Interfaces· Volume 17· Issue 36
Publisher page

Abstract

The encapsulation process in flexible printed circuit board (FPCB) manufacturing typically involves laminating a flexible copper-clad laminate (FCCL) with a coverlay film, using heat and pressure in methods such as hot press lamination. However, when they are applied to long-length FPCBs for electric vehicle applications, traditional hot press methods face challenges in scalability and productivity. To overcome these challenges, this study proposes a scalable roll-to-roll approach for encapsulating long-length FPCB. This approach enhances scalability to meet the requirement of long-lengthening continuously, but this can lead to incomplete filling in narrow circuit patterns due to insufficient flowability of the B-stage adhesive. To enhance flowability, a roll-to-roll system was developed, incorporating a rubber roll and a steel roll for the adhesive material. The effectiveness of copper width dimensions and process parameters on encapsulation performance was investigated in the experimental analysis according to the rheological and thermomechanical characterizations of the B-stage adhesive. These results were quantified through image analysis and visualized using contour mapping to exhibit the influence of process parameters on the filling area. The reliability and durability of the developed approach were validated through the analysis of adhesive properties and electrical performance. The developed roll-to-roll approach to the encapsulation process enables scalability while ensuring the durability and reliability of the long-length FPCB.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Material Properties and Processing · Textile materials and evaluations · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nano Lithography and Manufacturing Research Center

Korea Institute of Machinery & Materials (KIMM)

Department of Nanomechatronics Engineering

University of Science & Technology (UST)

Electric Vehicle Advanced Materials (EV.A.M)

Funding

Korea Institute of Machinery and Materials · Ministry of Science and ICT, South Korea · Ministry of Trade, Industry and Energy

References (39)

Show source-provided references
1. 10.1109/TED.2020.303976010.1109/TED.2020.3039760 ↗
2. 10.3390/s2215555710.3390/s22155557 ↗
3. 10.1016/j.microrel.2013.06.00810.1016/j.microrel.2013.06.008 ↗
4. 10.1016/j.microrel.2011.11.00310.1016/j.microrel.2011.11.003 ↗
5. 10.3390/mi1405102010.3390/mi14051020 ↗
6. Lee, T.H.; Analysis of the EMI and SI effects on the flexible-PCBs for mobile application. In 2008 Electrical Design of Advanced Packaging and Systems Symposium; IEEE, 2008; pp 97–100.10.1109/EDAPS.2008.4736008 ↗
7. 10.1109/JSEN.2008.91892310.1109/JSEN.2008.918923 ↗
8. 10.1016/j.sna.2024.11502610.1016/j.sna.2024.115026 ↗
9. 10.1002/advs.20240045110.1002/advs.202400451 ↗
10. 10.1016/j.enconman.2022.11546910.1016/j.enconman.2022.115469 ↗
11. Valori, M.; Towards the automated coverlay assembly in FPCB manufacturing: concept and preliminary tests. In International Precision Assembly Seminar; Springer International Publishing: Cham, 2020; pp 36–50.10.1007/978-3-030-72632-4_3 ↗
12. 10.1016/j.jmrt.2024.05.07710.1016/j.jmrt.2024.05.077 ↗
13. 10.1021/acsami.3c0958710.1021/acsami.3c09587 ↗
14. 10.1038/nnano.2010.13210.1038/nnano.2010.132 ↗
15. 10.1021/acs.nanolett.5b0153110.1021/acs.nanolett.5b01531 ↗
16. 10.1021/acsami.2c2122910.1021/acsami.2c21229 ↗
17. 10.1021/acsami.4c1128610.1021/acsami.4c11286 ↗
18. 10.1021/acsanm.3c0297710.1021/acsanm.3c02977 ↗
19. 10.4028/www.scientific.net/MSF.654-656.275510.4028/www.scientific.net/MSF.654-656.2755 ↗
20. 10.1016/j.jmapro.2024.06.03910.1016/j.jmapro.2024.06.039 ↗
21. 10.1016/j.microrel.2010.06.00410.1016/j.microrel.2010.06.004 ↗
22. Choi, K. W.; Two-phase flow simulation of molded underfill process to mitigate void and assure reliability at product level. In 2016 IEEE 66th Electronic Components and Technology Conference (ECTC); IEEE, 2016; pp 660–665.10.1109/ECTC.2016.34 ↗
23. 10.1016/j.compositesa.2015.01.02910.1016/j.compositesa.2015.01.029 ↗
24. 10.1163/156856198X0079510.1163/156856198X00795 ↗
25. Chen Y. · 2012 · 1
26. 10.1016/j.polymertesting.2018.10.02510.1016/j.polymertesting.2018.10.025 ↗
27. 10.1002/pen.1074610.1002/pen.10746 ↗
28. Macosko, C. W. Rheology: Principles, Measurements, and Applications; Wiley-VCH: New York, 1994; pp 1–550.
29. 10.1002/pen.76015060310.1002/pen.760150603 ↗
30. 10.3390/polym1320350910.3390/polym13203509 ↗
31. Mittal, K. L., Ed. Polymer Surface Modification to Enhance Adhesion: Techniques and Applications; Wiley-Scrivener: Beverly, MA, 2024; pp 1–583.10.1002/9781394231034 ↗
32. 10.1021/am302795v10.1021/am302795v ↗
33. 10.1016/j.surfcoat.2017.12.01810.1016/j.surfcoat.2017.12.018 ↗
34. 10.1002/admi.20180124710.1002/admi.201801247 ↗
35. 10.1016/j.jmrt.2023.06.14810.1016/j.jmrt.2023.06.148 ↗
36. 10.1021/acs.chemrev.5b0063410.1021/acs.chemrev.5b00634 ↗
37. 10.1021/acs.macromol.4c0089710.1021/acs.macromol.4c00897 ↗
38. 10.1007/s11837-022-05378-x10.1007/s11837-022-05378-x ↗
39. 10.1002/9781394231034.ch210.1002/9781394231034.ch2 ↗