journal article·2020-04Open access

Model improvement of the miniature switched capacitor for high‐speed applications

Alieh Razeghi‐Harikandeei, Bahram Azizollah Ganji, Javad Koohsorkhi, Ramazan‐Ali Jafari‐Talookolaei, Abdolali Abdipour

Micro & Nano Letters· Volume 15· Issue 5

Abstract

In this work, it is shown that the spring constant model for rectangular fixed–fixed beam used in the literature for high‐speed applications is not correct and the model is improved for all fixed–fixed beams with a desired symmetrical shape. The new model is used to calculate the resonance frequency of the fabricated high‐speed‐specific 3D bridge named boat‐like shape beam existing in the literature. The comparison shows that the model result is in good agreement with the simulation and measurement results. Also, the concept of the miniature microelectromechanical systems switched capacitors will be explained and it is shown that the rectangular beam with a simple fabrication process can be designed to achieve high speed about 150 ns like a boat‐like shape beam which needs to two specific lithography processes that are so involved.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced MEMS and NEMS Technologies · Sensor Technology and Measurement Systems · Electric Motor Design and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Electrical and Computer Engineering Babol Noshirvani University of Technology 484 Babol Iran

Department of Micro & Nano Electromechanical System Faculty of New Sciences and Technologies Tehran University Tehran Iran

Department of Mechanical Engineering Babol Noshirvani University of Technology Babol P.O. Box 47148–71167 Iran

Microwave/mm‐Wave and Wireless Communication Research Laboratory Department of Electrical Engineering Amirkabir University of Technology 424 Hafez Ave Tehran Iran

Funding

Babol Noshirvani University of Technology

References (19)

Show source-provided references
1. 10.1007/s00542‐013‐1921‐x10.1007/s00542‐013‐1921‐x ↗
2. 10.1007/s00542‐014‐2162‐310.1007/s00542‐014‐2162‐3 ↗
3. 10.1049/el.2019.232210.1049/el.2019.2322 ↗
4. 10.1049/el:2003035810.1049/el:20030358 ↗
5. 10.1109/LMWC.2005.86000610.1109/LMWC.2005.860006 ↗
6. LeeS.‐D.JunB.‐C.BaekT.‐J.et al.: ‘Studies on the pull‐up RF MEMS switch for the lower actuation voltage and high speed using double electrode’.Microwave Conf. Proc. 2005 APMC 2005 Asia‐Pacific Conf. Proc. Suzhou People's Republic of China 2005 vol. 1 p.4
7. MercierD.Van CaekenbergheK.RebeizG.M.: ‘Miniature RF MEMS switched capacitors’.2005 IEEE MTT‐S Int. Microwave Symp. Digest Long Beach CA USA 2005 pp.745–74810.1109/MWSYM.2005.1516719 ↗
8. 10.1109/TMTT.2007.89776010.1109/TMTT.2007.897760 ↗
9. LacroixB.PothierA.CrunteanuA.et al.: ‘CMOS compatible fast switching RF MEMS varactors’.2006 36th European Microwave Conf. Manchester UK 2006 pp.1072–107510.1109/EUMC.2006.281119 ↗
10. 10.1088/0960‐1317/20/6/06401110.1088/0960‐1317/20/6/064011 ↗
11. 10.1109/TMTT.2008.91907610.1109/TMTT.2008.919076 ↗
12. Beer F.P. · 2002
13. Senturia S.D. · 2007
14. 10.1007/978-1-4419-6020-710.1007/978-1-4419-6020-7 ↗
15. MuldavinJ.B.RebeizG.M.: ‘Nonlinear electro‐mechanical modeling of MEMS switches’.2001 IEEE MTT‐S Int. Microwave Symp. Digest Phoenix AZ USA 2001 vol. 3 pp.2119–212210.1109/MWSYM.2001.967332 ↗
16. 10.1049/el:2009328110.1049/el:20093281 ↗
17. MaQ.ChengP.: ‘Center‐mass‐reduced microbridge structures for ultra‐high frequency MEM resonator’ Google Patents 2003
18. 10.1016/j.cnsns.2008.07.01610.1016/j.cnsns.2008.07.016 ↗
19. 10.1109/84.58578810.1109/84.585788 ↗