Particle Size Influences on the Coating Microstructure through Green Chromia Inclusion in Plasma Electrolytic Oxidation
Source abstract
Abstract
In an effort to color the aluminum alloy surface green via plasma electrolytic oxidation (PEO), two alkaline solutions have been employed with particulate inclusions and sodium aluminate. Electrolyte I comprises a self-made chromia pigment with a mean particle size 69 nm, whereas electrolyte II contains a commercially available pigment, GN-M, with a larger particle size 351 nm. Both pigments are oxygen deficient Cr 2 O 3-δ of corundum-type structure before coating, the oxidative environment of PEO converts them into stoichiometric Cr 2 O 3 . In electrolyte I and II, the oxides of chromium and aluminum deposit simultaneously under analogous PEO conditions, yet resulting in very different microstructures. The GN-M inclusion of large size amasses on top of the coating, while the self-made inclusion goes deep, and closely associates with alumina and pores. The oxide coating, grown in electrolyte II, consists of a top Cr 2 O 3 -rich layer and a dense alumina layer underneath, delineated by the boundary marked with microdischarge burns. On the other hand, the self-made particulate inclusion appears to bring the electric microdischarges inside the coating and create inner pores and damages. The structure difference, caused by the difference in microdischarge locations, is attributed to shifting of the Cr 2 O 3 –Al 2 O 3 interface where p-type and n-type semiconductors meet.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Pigment Synthesis and Properties · Corrosion Behavior and Inhibition · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering, National Taiwan University of Science and Technology, 43, Keelung Road, Section 4, Taipei 10607 Taiwan
Department of Materials Engineering, McGill University, 3610 University Street, Montreal, Quebec H3A 0C5 Canada
Department of Mechanical Engineering, National Taiwan University of Science and Technology, 43, Keelung Road, Section 4, Taipei 10607 Taiwan
Funding
Ministry of Science and Technology, Taiwan
References (49)
Show source-provided references
1. 10.1002/crat.217022011510.1002/crat.2170220115 ↗
2. 10.1016/j.vacuum.2014.10.00810.1016/j.vacuum.2014.10.008 ↗
3. 10.2320/matertrans.M201126310.2320/matertrans.M2011263 ↗
4. 10.1116/1.367561010.1116/1.3675610 ↗
5. Schardein, D. J.; Roger, C. M.; Craig, H. L.Anodic Production of Pigmented Siliceous Coatings for Aluminous Metals. U.S. Patent 3,812,023, 1974.
6. 10.1016/j.dyepig.2008.07.00410.1016/j.dyepig.2008.07.004 ↗
7. 10.1016/j.surfcoat.2016.08.05510.1016/j.surfcoat.2016.08.055 ↗
8. 10.1016/j.msec.2016.08.05010.1016/j.msec.2016.08.050 ↗
9. 10.1021/am405938n10.1021/am405938n ↗
10. 10.1016/j.jallcom.2011.07.03510.1016/j.jallcom.2011.07.035 ↗
11. 10.1016/j.surfcoat.2011.01.03310.1016/j.surfcoat.2011.01.033 ↗
12. 10.1016/j.surfcoat.2016.07.08610.1016/j.surfcoat.2016.07.086 ↗
13. 10.1155/2015/15429810.1155/2015/154298 ↗
14. 10.1016/j.apsusc.2014.05.03110.1016/j.apsusc.2014.05.031 ↗
15. 10.1002/sia.314010.1002/sia.3140 ↗
16. 10.1016/j.apsusc.2008.08.03610.1016/j.apsusc.2008.08.036 ↗
17. 10.1007/s10853-007-2360-910.1007/s10853-007-2360-9 ↗
18. 10.1016/j.apsusc.2008.04.10010.1016/j.apsusc.2008.04.100 ↗
19. 10.1039/C6CP07135J10.1039/C6CP07135J ↗
20. 10.1016/j.corsci.2011.07.03710.1016/j.corsci.2011.07.037 ↗
21. 10.1016/j.surfcoat.2013.10.04210.1016/j.surfcoat.2013.10.042 ↗
22. 10.1007/s10008-015-2935-310.1007/s10008-015-2935-3 ↗
23. 10.1111/j.1151-2916.1998.tb02493.x10.1111/j.1151-2916.1998.tb02493.x ↗
24. 10.1007/s11665-016-2405-910.1007/s11665-016-2405-9 ↗
25. 10.1016/j.triboint.2016.01.02010.1016/j.triboint.2016.01.020 ↗
26. 10.1016/j.surfcoat.2013.04.05910.1016/j.surfcoat.2013.04.059 ↗
27. 10.1016/j.vacuum.2014.05.00810.1016/j.vacuum.2014.05.008 ↗
28. 10.1016/j.triboint.2016.06.01310.1016/j.triboint.2016.06.013 ↗
29. 10.1016/j.surfcoat.2014.10.04810.1016/j.surfcoat.2014.10.048 ↗
30. 10.1016/j.apsusc.2013.07.04110.1016/j.apsusc.2013.07.041 ↗
31. 10.1016/j.jallcom.2009.03.15910.1016/j.jallcom.2009.03.159 ↗
32. 10.1016/j.surfcoat.2014.11.06210.1016/j.surfcoat.2014.11.062 ↗
33. 10.1016/j.surfcoat.2009.05.00410.1016/j.surfcoat.2009.05.004 ↗
34. 10.1016/j.corsci.2015.09.01610.1016/j.corsci.2015.09.016 ↗
35. 10.1016/j.matlet.2012.07.03210.1016/j.matlet.2012.07.032 ↗
36. 10.1016/j.electacta.2012.01.05310.1016/j.electacta.2012.01.053 ↗
37. 10.1016/j.surfcoat.2015.12.09110.1016/j.surfcoat.2015.12.091 ↗
38. Thompson B. · 1998
39. Frimova A. · TAGA J. Graphic Technol. · 2005 · 2 · 122
40. 10.1016/j.surfcoat.2013.03.04110.1016/j.surfcoat.2013.03.041 ↗
41. 10.1016/j.surfcoat.2014.12.07810.1016/j.surfcoat.2014.12.078 ↗
42. 10.1016/j.electacta.2014.06.12210.1016/j.electacta.2014.06.122 ↗
43. 10.1088/0022-3727/43/10/10520310.1088/0022-3727/43/10/105203 ↗
44. 10.1016/j.surfcoat.2015.01.04310.1016/j.surfcoat.2015.01.043 ↗
45. 10.4236/msa.2014.5301710.4236/msa.2014.53017 ↗
46. 10.1016/j.corsci.2012.03.01710.1016/j.corsci.2012.03.017 ↗
47. 10.1016/j.electacta.2007.08.07410.1016/j.electacta.2007.08.074 ↗
48. 10.1063/1.486701210.1063/1.4867012 ↗
49. Duan H. · Int. J. Electrochem. Soc. · 2012 · 7 · 761910.1016/S1452-3981(23)15810-X ↗