Confinement of Elastomeric Block Copolymers via Forced Assembly Coextrusion
Source abstract
Abstract
Forced assembly processing provides a unique opportunity to examine the effects of confinement on block copolymers (BCPs) via conventional melt processing techniques. The microlayering process was utilized to produce novel materials with enhanced mechanical properties through selective manipulation of layer thickness. Multilayer films consisting of an elastomeric, symmetric block copolymer confined between rigid polystyrene (PS) layers were produced with layer thicknesses ranging from 100 to 600 nm. Deformation studies of the confined BCP showed an increase in ductility as the layer thickness decreased to 190 nm due to a shift in the mode of deformation from crazing to shear yielding. Postextrusion annealing was performed on the multilayer films to investigate the impact of a highly ordered morphology on the mechanical properties. The annealed multilayer films exhibited increased toughness with decreasing layer thickness and resulted in homogeneous deformation compared to the as-extruded films. Multilayer coextrusion proved to be an advantageous method for producing continuous films with tunable mechanical response.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Block Copolymer Self-Assembly · Polymer crystallization and properties · Polymer Surface Interaction Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Macromolecular Science and Engineering, and ‡Center for Layered Polymeric Systems, Case Western Reserve University, Cleveland, Ohio 44106-7202, United States
References (45)
Show source-provided references
1. Hamley I. · 199810.1093/oso/9780198502180.001.0001 ↗
2. Bates F. S. · Annu. Rev. Phys. Chem. · 1990 · 41 · 52510.1146/annurev.pc.41.100190.002521 ↗
3. Fredrickson G. H. · Annu. Rev. Mater. Sci. · 1996 · 26 · 50110.1146/annurev.ms.26.080196.002441 ↗
4. Matsen M. W. · Macromolecules · 1996 · 29 · 764110.1021/ma960744q ↗
5. Matsen M. W. · Macromolecules · 1996 · 29 · 109110.1021/ma951138i ↗
6. Sakurai S. · Trends Polym. Sci. · 1997 · 5 · 210
7. Sakurai S. · Macromolecules · 1995 · 28 · 794710.1021/ma00127a050 ↗
8. Mundra M. K. · Polymer · 2006 · 47 · 774710.1016/j.polymer.2006.08.064 ↗
9. Koneripalli N. · Langmuir · 1996 · 12 · 668110.1021/la960608e ↗
10. Frank B. · Macromolecules · 1996 · 29 · 653110.1021/ma960749n ↗
11. Koneripalli N. · Macromolecules · 1995 · 28 · 289710.1021/ma00112a041 ↗
12. Nick L. · Langmuir · 1995 · 11 · 191210.1021/la00006a016 ↗
13. Angerman H. J. · Macromolecules · 2006 · 39 · 621010.1021/ma060704e ↗
14. Huang Y. M. · Macromol. Theory Simul. · 2006 · 15 · 11710.1002/mats.200500043 ↗
15. Knoll A. · Phys. Rev. Lett. · 2002 · 89 · 03550110.1103/PhysRevLett.89.035501 ↗
16. Knoll A. · J. Chem. Phys. · 2004 · 120 · 110510.1063/1.1627324 ↗
17. Zettl U. · Langmuir · 2010 · 26 · 661010.1021/la903922y ↗
18. Horvat A. · J. Chem. Phys. · 2004 · 111710.1063/1.1627325 ↗
19. Kim G. · Macromolecules · 1998 · 31 · 256910.1021/ma971349i ↗
20. Park I. · Macromolecules · 2005 · 38 · 1053210.1021/ma051137i ↗
21. Matsen M. W. · J. Chem. Phys. · 1997 · 106 · 778110.1063/1.473778 ↗
22. Yu B. · Macromolecules · 2008 · 41 · 404210.1021/ma702430v ↗
23. Xiang H. Q. · Macromolecules · 2004 · 37 · 566010.1021/ma049299m ↗
24. Kamperman M. · Polym. Chem. · 2010 · 100110.1039/c0py00146e ↗
25. Pethe V. V. · J. Appl. Polym. Sci. · 2008 · 110 · 141110.1002/app.28193 ↗
26. Ranade A. P. · J. Cell. Plast. · 2004 · 40 · 49710.1177/0021955X04048425 ↗
27. Baer E. · Macromol. Symp. · 1999 · 147 · 3710.1002/masy.19991470106 ↗
28. Kazmierczak T. · Macromol. Rapid Commun. · 2007 · 28 · 221010.1002/marc.200700367 ↗
29. Tangirala R. · Adv. Funct. Mater. · 2004 · 14 · 59510.1002/adfm.200305446 ↗
30. Ma M. · J. Mater. Sci. · 1990 · 25 · 203910.1007/BF01045761 ↗
31. Mueller C. · Polym. Eng. Sci. · 1997 · 35510.1002/pen.11678 ↗
32. Mueller, C. D.; Kerns, J.; Ebeling, T.; Nazarenko, S.; Hiltner, A.; Baer, E.InPolymer Process Engineering 97;Coates, P. D., Ed.The Institute of Materials:London, 1997; pp137–157.
33. Liu R. Y. F. · Macromol. Rapid Commun. · 2003 · 24 · 94310.1002/marc.200300051 ↗
34. Liu R. Y. F. · Macromolecules · 2004 · 37 · 697210.1021/ma049233r ↗
35. Liu R. Y. F. · Macromolecules · 2005 · 38 · 1072110.1021/ma051649x ↗
36. Kerns J. · J. Appl. Polym. Sci. · 2000 · 77 · 154510.1002/1097-4628(20000815)77:7<1545::AID-APP16>3.0.CO;2-G ↗
37. Sung K. · J. Mater. Sci. · 1994 · 29 · 555910.1007/BF00349947 ↗
38. Sung K. · J. Appl. Polym. Sci. · 1994 · 52 · 14710.1002/app.1994.070520204 ↗
39. Michler G. H. · J. Appl. Polym. Sci. · 2002 · 85 · 68310.1002/app.10540 ↗
40. 2010
41. Michler, G. H.Mechanical Properties of Polymers Based on Nanostructure and Morphology,1st ed.CRC Press:Boca Raton, FL, 2005; pp419–426.
42. Ponting M. · Ind. Eng. Chem. Res. · 2010 · 49 · 1211110.1021/ie100321h ↗
43. Sakurai S. · Macromolecules · 1993 · 26 · 48510.1021/ma00055a013 ↗
44. Keller A. · Nature · 1970 · 225 · 53810.1038/225538a0 ↗
45. Park S. M. · Adv. Mater. · 2007 · 19 · 60710.1002/adma.200601421 ↗