journal article·2009-01-28

A Simple Method To Improve the Clarity and Rheological Properties of Polymer/Clay Nanocomposites by Using Fractionated Clay Particles

Bani H. Cipriano, Takashi Kashiwagi, Xin Zhang, Srinivasa R. Raghavan

Publisher page

Abstract

We present a simple method to improve the transparency and rheological properties of polystyrene/organoclay nanocomposites. Such composites are typically prepared using organophilic derivatives of commercial montmorillonite (MMT) clays that contain a wide range of particle sizes. Our approach is to fractionate the native MMT clay to exclude large aggregates and then modify the fractionated clay (FMT) by a surfactant treatment (the resulting organoclay is termed o-FMT). Polystyrene nanocomposites made from the o-FMT are then compared with those made from a commercial organoclay having the same surfactant treatment. The o-FMT-based composites exhibit much better rheological properties (e.g., their elastic moduli at low frequencies are approximately 10 times higher) at equivalent mass loadings. Moreover, the o-FMT-based materials also have better transparency: e.g., a 10% o-FMT sample transmits as much light as a sample with 5% commercial clay. Transmission electron microscopy confirms that these differences in properties are related to microstructural differences; i.e., large aggregates are generally absent in the o-FMT samples. Clay fractionation may thus be a general strategy to enhance the properties of polymer/clay nanocomposites.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Departments of Chemical & Biomolecular Engineering and Materials Science & Engineering, University of Maryland, College Park, Maryland 20742-2111, and Fire Research Division, National Institute of Standards & Technology, Gaithersburg, Maryland 20899

References (16)

Show source-provided references
1. Giannelis E. P. · Adv. Polym. Sci. · 1999 · 138 · 10710.1007/3-540-69711-X_3 ↗
2. Alexandre M. · Mater. Sci. Eng., R · 2000 · 28 · 110.1016/S0927-796X(00)00012-7 ↗
3. Ray S. S. · Prog. Polym. Sci. · 2003 · 28 · 153910.1016/j.progpolymsci.2003.08.002 ↗
4. Chen B. · Chem. Soc. Rev. · 2008 · 37 · 56810.1039/B702653F ↗
5. Paul D. R. · Polymer · 2008 · 49 · 318710.1016/j.polymer.2008.04.017 ↗
6. Gilman J. W. · Chem. Mater. · 2000 · 12 · 186610.1021/cm0001760 ↗
7. Ho D. L. · Chem. Mater. · 2001 · 13 · 192310.1021/cm0008617 ↗
8. van Olphen H. · 1963
9. Abend S. · Appl. Clay Sci. · 2000 · 16 · 20110.1016/S0169-1317(99)00040-X ↗
10. Pignon F. · Phys. Rev. E · 1997 · 56 · 328110.1103/PhysRevE.56.3281 ↗
11. Gabriel J. C. P. · J. Phys. Chem. · 1996 · 100 · 1113910.1021/jp961088z ↗
12. Raghavan S. R. · 2004
13. Gabriel J. C. P. · Adv. Mater. · 2000 · 12 · 910.1002/(SICI)1521-4095(200001)12:1<9::AID-ADMA9>3.0.CO;2-6 ↗
14. Ren J. X. · Macromolecules · 2000 · 33 · 373910.1021/ma992091u ↗
15. Krishnamoorti R. · J. Chem. Phys. · 2001 · 114 · 496810.1063/1.1345908 ↗
16. Cipriano, B. H.Ph.D. Dissertation, University of Maryland, College Park, MD,2007.