Interface Structure and Corrosion Resistance of Ti/Cr Nanomultilayer Film Prepared by Magnetron Sputtering on Depleted Uranium
Source abstract
Abstract
Uranium has broadened utility in military and civilization; however, it is extremely apt to oxidation corrosion. Ti/Cr nanomultilayer film was prepared by unbalanced magnetron sputtering on the surface of depleted uranium (DU) to improve its corrosion resistance. The SEM morphologies show that Ti/Cr multilayer film has fine grain and high density. The Auger electron spectroscopy is used to investigate the depth profiles of Ti, U, and O elements of interface between DU substrate and the Ti interlayer, and indicates that the mutual diffusion area of U and Ti is formed at the interface. The TEM cross-section microstructure shows that the multilayer film has alternative Ti and Cr layers and form a perfect modulation structure. The modulation period is measured to be 4.8 nm in TEM morphology, the thickness ratio of Ti to Cr could be estimated to be about 1:2. Potentiodynamic polarization curves show that, after depositing Ti/Cr nanomultilayer film, the corrosion potential increases while the corrosion current density decreases obviously. The surface of Ti/Cr nanomultilayer film exhibits a pseudo passivation behavior when the polarization potential increased from -50 to 400 mV. It was indicated that, after depositing Ti/Cr nanomultilayer film by unbalanced magnetron sputtering, the corrosion resistance of DU was effectively improved.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
China Academy of Engineering and Physics, Mianyang, P.R. China
Science and Technology on Surface Physics and Chemistry Laboratory, Mianyang, P.R. China
References (16)
Show source-provided references
1. Hammond, C. R.InHandbook of Chemistry and Physics,81sted.Lide, D. R.;CRC Press:Boca Raton, FL, 2004; Vol.4, pp1–43.
2. Wilkinson, W. D.;Uranium Metallurgy;Interscience:Boston, 1962; pp757–764
3. McGillivray G. W. · J. Nucl. Mater. · 1994 · 208 · 8110.1016/0022-3115(94)90200-3 ↗
4. Chang F. · Surf. Coat. Technol. · 1991 · 48 · 3110.1016/0257-8972(91)90126-H ↗
5. Lv X. C. · Trans. Nonferrous Met. Soc. China · 2003 · 14 · 247
6. Chang F. C. · Surf. Coat. Technol. · 1991 · 49 · 8710.1016/0257-8972(91)90037-W ↗
7. Liu T. W. · Surf. Coat. Technol. · 2007 · 201 · 673710.1016/j.surfcoat.2006.09.126 ↗
8. Arkush R. · J. Alloys Compd. · 2002 · 340 · 12210.1016/S0925-8388(02)00017-8 ↗
9. Arkush R. · J. Nucl. Mater. · 2000 · 281 · 18210.1016/S0022-3115(00)00335-4 ↗
10. Chung Y. W. · MRS Bull. · 2003 · 28 · 16410.1557/mrs2003.56 ↗
11. Veprek S. · Thin Solid Films · 2005 · 476 · 110.1016/j.tsf.2004.10.053 ↗
12. Bardi U. · Appl. Surf. Sci. · 2005 · 252 · 133910.1016/j.apsusc.2005.02.105 ↗
13. Stueber M. · J. Alloys Compd. · 2009 · 483 · 32110.1016/j.jallcom.2008.08.133 ↗
14. Sun P. L. · Thin Solid Films · 2010 · 518 · 751910.1016/j.tsf.2010.05.037 ↗
15. Idriss H. · Surf. Sci. Rep. · 2010 · 65 · 6710.1016/j.surfrep.2010.01.001 ↗
16. Jiang C. L. · Sci. Technol. (China) · 2009 · 29 · 135