journal article·2017-05-17

Enhancing the Bioactivity of Yttria-Stabilized Tetragonal Zirconia Ceramics via Grain-Boundary Activation

Jinhuan Ke, Fupo He, Jiandong Ye

Publisher page

Abstract

Yttria-stabilized tetragonal zirconia (Y-TZP) has been proposed as a potential dental implant because of its good biocompatibility, excellent mechanical properties, and distinctive aesthetic effect. However, Y-TZP cannot form chemical bonds with bone tissue because of its biological inertness, which affects the reliability and long-term efficacy of Y-TZP implants. In this study, to improve the bioactivity of Y-TZP ceramics while maintaining their good mechanical performance, Y-TZP was modified by grain-boundary activation via the infiltration of a bioactive glass (BG) sol into the surface layers of Y-TZP ceramics under different negative pressures (atmospheric pressure, -0.05 kPa, and -0.1 kPa), followed by gelling and sintering. The in vitro bioactivity, mechanical properties, and cell behavior of the Y-TZP with improved bioactivity were systematically investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), electron probe microanalysis (EPMA), and Raman spectroscopy. The results of the bioactivity test conducted by immersing Y-TZP in simulated body fluid (SBF) showed that a bonelike apatite layer was produced on the entire surface. The mechanical properties of the modified Y-TZP decreased as the negative pressure in the BG-infiltration process increased relative to those of the Y-TZP blank group. However, the samples infiltrated with the BG sol under -0.05 kPa and atmospheric pressure still retained good mechanical performance. The cell-culture results revealed that the bioactive surface modification of Y-TZP could promote cell adhesion and differentiation. The present work demonstrates that the bioactivity of Y-TZP can be enhanced by grain-boundary activation, and the bioactive Y-TZP is expected to be a potential candidate for use as a dental implant material.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641, China

National Engineering Research Center for Tissue Restoration and Reconstruction, Guangzhou 510006, China

School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China

Key Laboratory of Biomedical Materials of Ministry of Education, South China University of Technology, Guangzhou 510641, China

Funding

the National High Technology Research and Development Program of China · the Specialized Research Fund for the Doctoral Program of Higher Education of China

References (47)

Show source-provided references
1. Brånemark P. I. · Scand. J. Plast. Reconstr. Surg. · 1977 · 11 · 1
2. Oliva J. · Int. J. Oral. Max. Impl. · 2010 · 25 · 336
3. 10.1111/j.1600-0757.2007.00247.x10.1111/j.1600-0757.2007.00247.x ↗
4. Oliva J. · Int. J. Oral. Max. Impl. · 2007 · 22 · 430
5. 10.1002/jbm.b.3111310.1002/jbm.b.31113 ↗
6. 10.1111/j.1708-8208.2008.00105.x10.1111/j.1708-8208.2008.00105.x ↗
7. Heydecke G. · Int. J. Prosthodont · 1999 · 12 · 184
8. 10.1016/S0142-9612(98)00010-610.1016/S0142-9612(98)00010-6 ↗
9. 10.1016/j.prosdent.2004.09.00110.1016/j.prosdent.2004.09.001 ↗
10. 10.1016/j.colsurfb.2013.01.02310.1016/j.colsurfb.2013.01.023 ↗
11. Borgonovo A. E. · Minerva. stomatolo. · 2010 · 59 · 381
12. 10.1111/clr.1204410.1111/clr.12044 ↗
13. 10.1007/s10856-005-2608-310.1007/s10856-005-2608-3 ↗
14. 10.1016/S0021-9290(00)00140-810.1016/S0021-9290(00)00140-8 ↗
15. 10.1002/(SICI)1097-4636(19970305)34:3<305::AID-JBM5>3.3.CO;2-410.1002/(SICI)1097-4636(19970305)34:3<305::AID-JBM5>3.3.CO;2-4 ↗
16. 10.1016/j.surfcoat.2006.07.05810.1016/j.surfcoat.2006.07.058 ↗
17. 10.2351/1.164263410.2351/1.1642634 ↗
18. 10.1002/jbm.1007110.1002/jbm.10071 ↗
19. 10.1016/j.apsusc.2006.07.03810.1016/j.apsusc.2006.07.038 ↗
20. 10.1016/j.biomaterials.2003.10.09410.1016/j.biomaterials.2003.10.094 ↗
21. 10.1016/j.surfcoat.2013.10.03910.1016/j.surfcoat.2013.10.039 ↗
22. 10.1016/j.matlet.2013.07.05610.1016/j.matlet.2013.07.056 ↗
23. 10.4012/dmj.28.46110.4012/dmj.28.461 ↗
24. 10.1016/j.apsusc.2014.09.17910.1016/j.apsusc.2014.09.179 ↗
25. 10.1016/j.apsusc.2012.01.04810.1016/j.apsusc.2012.01.048 ↗
26. 10.4028/www.scientific.net/KEM.309-311.58910.4028/www.scientific.net/KEM.309-311.589 ↗
27. 10.4028/www.scientific.net/KEM.309-311.44510.4028/www.scientific.net/KEM.309-311.445 ↗
28. 10.4028/0-87849-993-8.19310.4028/0-87849-993-8.193 ↗
29. 10.1002/1097-4636(2000)53:6<694::AID-JBM12>3.0.CO;2-610.1002/1097-4636(2000)53:6<694::AID-JBM12>3.0.CO;2-6 ↗
30. 10.1016/j.biomaterials.2006.01.01710.1016/j.biomaterials.2006.01.017 ↗
31. 10.1007/s10853-005-2957-910.1007/s10853-005-2957-9 ↗
32. 10.1016/j.msec.2009.03.00610.1016/j.msec.2009.03.006 ↗
33. 10.1016/j.msea.2007.06.00910.1016/j.msea.2007.06.009 ↗
34. 10.1016/j.ceramint.2010.11.02710.1016/j.ceramint.2010.11.027 ↗
35. 10.1016/S0272-8842(02)00097-410.1016/S0272-8842(02)00097-4 ↗
36. 10.1002/jbm.82005061110.1002/jbm.820050611 ↗
37. 10.1111/j.1151-2916.1998.tb02540.x10.1111/j.1151-2916.1998.tb02540.x ↗
38. 10.1016/j.surfcoat.2008.06.10910.1016/j.surfcoat.2008.06.109 ↗
39. 10.1016/j.biomaterials.2005.10.03310.1016/j.biomaterials.2005.10.033 ↗
40. 10.1016/j.biomaterials.2004.02.05410.1016/j.biomaterials.2004.02.054 ↗
41. 10.1111/j.1551-2916.2006.01237.x10.1111/j.1551-2916.2006.01237.x ↗
42. 10.1179/1432891714Z.00000000072510.1179/1432891714Z.000000000725 ↗
43. 10.1111/j.1151-2916.1998.tb02301.x10.1111/j.1151-2916.1998.tb02301.x ↗
44. 10.1023/A:100890151227310.1023/A:1008901512273 ↗
45. 10.1016/j.biomaterials.2005.11.00310.1016/j.biomaterials.2005.11.003 ↗
46. 10.1016/j.biomaterials.2011.01.00410.1016/j.biomaterials.2011.01.004 ↗
47. 10.1016/S0142-9612(00)00173-310.1016/S0142-9612(00)00173-3 ↗