journal article·2018-05-09

Direct Printing of Graphene Electrodes for High-Performance Organic Inverters

Aditi R. Naik, Jae Joon Kim, Özlem Usluer, D. Leonardo Gonzalez Arellano, Ethan B. Secor, Antonio Facchetti, Mark C. Hersam, Alejandro L. Briseno, James J. Watkins

ACS Applied Materials & Interfaces· Volume 10· Issue 18
Publisher page

Abstract

Scalable fabrication of high-resolution electrodes and interconnects is necessary to enable advanced, high-performance, printed, and flexible electronics. Here, we demonstrate the direct printing of graphene patterns with feature widths from 300 μm to ∼310 nm by liquid-bridge-mediated nanotransfer molding. This solution-based technique enables residue-free printing of graphene patterns on a variety of substrates with surface energies between ∼43 and 73 mN m–1. Using printed graphene source and drain electrodes, high-performance organic field-effect transistors (OFETs) are fabricated with single-crystal rubrene (p-type) and fluorocarbon-substituted dicyanoperylene-3,4:9,10-bis(dicarboximide) (PDIF-CN2) (n-type) semiconductors. Measured mobilities range from 2.1 to 0.2 cm2 V–1 s–1 for rubrene and from 0.6 to 0.1 cm2 V–1 s–1 for PDIF-CN2. Complementary inverter circuits are fabricated from these single-crystal OFETs with gains as high as ∼50. Finally, these high-resolution graphene patterns are compatible with scalable processing, offering compelling opportunities for inexpensive printed electronics with increased performance and integration density.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Graphene research and applications · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Polymer Science and Engineering, University of Massachusetts, Amherst, Massachusetts 01003, United States

Funding

Air Force Research Laboratory · Division of Civil, Mechanical and Manufacturing Innovation · Center for Hierarchical Manufacturing, National Science Foundation · Division of Materials Research

References (34)

Show source-provided references
1. 10.1109/JETCAS.2017.267386310.1109/JETCAS.2017.2673863 ↗
2. 10.1039/c0jm00264j10.1039/c0jm00264j ↗
3. 10.1039/C7TC03532B10.1039/C7TC03532B ↗
4. 10.1002/adma.20120148210.1002/adma.201201482 ↗
5. 10.1002/adfm.20140034810.1002/adfm.201400348 ↗
6. 10.1002/adma.20120262610.1002/adma.201202626 ↗
7. 10.1088/0957-4484/22/44/44530110.1088/0957-4484/22/44/445301 ↗
8. 10.1021/nl100750v10.1021/nl100750v ↗
9. 10.1021/ie502675z10.1021/ie502675z ↗
10. 10.1002/adma.20150347810.1002/adma.201503478 ↗
11. 10.1002/aenm.20160090910.1002/aenm.201600909 ↗
12. 10.1021/acsami.6b0553610.1021/acsami.6b05536 ↗
13. 10.1021/acsnano.5b0117910.1021/acsnano.5b01179 ↗
14. 10.1021/jz400644c10.1021/jz400644c ↗
15. 10.1002/adma.20140105210.1002/adma.201401052 ↗
16. 10.1002/adma.20140413310.1002/adma.201404133 ↗
17. 10.1126/sciadv.160166010.1126/sciadv.1601660 ↗
18. 10.1021/acsnano.7b0379510.1021/acsnano.7b03795 ↗
19. 10.1038/nnano.2010.17510.1038/nnano.2010.175 ↗
20. 10.1021/ac971295a10.1021/ac971295a ↗
21. 10.1021/ja107661g10.1021/ja107661g ↗
22. 10.1002/adfm.20137023810.1002/adfm.201370238 ↗
23. 10.1002/adma.20060188410.1002/adma.200601884 ↗
24. 10.1007/s11434-010-3251-y10.1007/s11434-010-3251-y ↗
25. 10.1007/s11814-011-0239-610.1007/s11814-011-0239-6 ↗
26. 10.1016/j.tsf.2006.04.00610.1016/j.tsf.2006.04.006 ↗
27. 10.1111/j.1151-2916.1967.tb15166.x10.1111/j.1151-2916.1967.tb15166.x ↗
28. 10.1007/BF0321467710.1007/BF03214677 ↗
29. 10.1002/app.1969.07013081510.1002/app.1969.070130815 ↗
30. 10.1002/adma.20070187610.1002/adma.200701876 ↗
31. 10.1002/adma.20150286610.1002/adma.201502866 ↗
32. 10.1021/ja809848y10.1021/ja809848y ↗
33. 10.1063/1.162279910.1063/1.1622799 ↗
34. 10.1002/adma.20080220210.1002/adma.200802202 ↗