Source abstract
Abstract
Electrospinning is a promising technique for the fabrication of bioscaffolds in tissue engineering applications. Pertaining issues of multiple polymer jets and bending instabilities result in random paths which lend poor controllability over scaffolds morphology for affecting the porosity and mechanical stability. The present study alleviates these challenges by demonstrating a novel self-directing single jet taking a specifically patterned path to deposit fibers into circular and uniform scaffolds without tuning any externally controlled parameters. High-speed camera observation revealed that the charge retention and dissipation on the collected fibers caused rapid autojet switching between the two jetting modes, namely, a microcantilever-like armed jet motion and a whipping motion, which sequentially expand the area and thickness of the scaffolds, respectively, in a layered-like fashion. The physical properties showed that the self-switching dual-jet modes generated multilayered microfibrous scaffolds (MFSs) with dual morphologies and varied fiber packing density, thereby establishing the gradient porosity and mechanical strength (through buckled fibers) in the scaffolds. In vitro studies showed that as-spun scaffolds are cell-permeable hierarchical 3D microporous structures enabling lateral cell seeding into multiple layers. The cell proliferation on days 6 and 9 increased 21% and 38% correspondingly on MFSs than on nanofibrous scaffolds (NFSs) done by conventional multijets electrospinning. Remarkably, this novel and single-step process is highly reproducible and tunable for developing fibrous scaffolds for tissue engineering applications.
Source: openalex_inverted_index · Quality: baseline
Affiliations
Institute of Physics, Academia Sinica, Taipei 11529, Taiwan, R.O.C.
Nano Science and Technology Program, Taiwan International Graduate Program, Academia Sinica, Taipei 11529, Taiwan, R.O.C.
Department of Engineering and System Science, National Tsing Hua University, Hsinchu 30013, Taiwan, R.O.C.
Department of Anatomy, Royal College of Surgeons in Ireland, Dublin 2 D02 YN77, Ireland
Department of Chemistry, National Taiwan University, Taipei 10617, Taiwan, R.O.C.
Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang, Gambang 26300, Malaysia
Department of Mechanical Engineering, National University of Singapore, Singapore 119260, Singapore
Genomics Research Center and Research Center for Applied Sciences, Academia Sinica, Taipei 11529, Taiwan, R.O.C.
Funding
Ministry of Science and Technology · Academia Sinica