journal article·2023-10-11Open access

Design and fabrication of thermal neutron shielding materials based on natural rubber and boron carbide

Jittinun Saenpoowa, Atirat Pitaktrakul, Supharat Inphonlek, Chaiwat Ruksakulpiwat, Chinorat Kobdaj

MRS Communications· Volume 13· Issue 6

Abstract

Thermal neutron shielding materials based on natural rubber were developed with the addition of various concentrations of boron carbide (B4C) and carbon black. Different vulcanizing agents and natural rubber types were also considered. The mechanical and neutron shielding properties of samples were tested. At 60 parts per hundred rubber (phr), the addition of carbon black increased Shore hardness to 76.53 and activation energy to 120.56 kJ/mol. B4C increased Mooney viscosity and torque until 40 phr then decreased thereafter. Neutron imaging shows that B4C at 60 phr has the lowest brightness fraction of 0.047 and a macroscopic cross-section of 13.56 cm−1. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Radiation Shielding Materials Analysis · Nuclear Physics and Applications · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Y.Q. Chen, B.H. Yan, Prog. Nucl. Energy 161, 104741 (2023)10.1016/j.pnucene.2023.104741 ↗
2. W.W. Kuhne, B.B. Gersey, R. Wilkins, H. Wu, S.A. Wender, V. George, W.S. Dynan, Radiat. Res. 172, 473–480 (2009)10.1667/RR1556.1 ↗
3. V. Sears, Neutron News 3, 26 (1992)10.1080/10448639208218770 ↗
4. O. Onjun, N. Laothong, R. Picha, W. Ratanathongchai, T. Onjun, Prog. Nucl. Sci. Technol. 4, 631–634 (2014)10.15669/pnst.4.631 ↗
5. D. B. Pelowitz, J. W. Durkee Jr., J. S. Elson, M. L. Fensin, J. S. Hendricks, M. R. James, R. C. Johns, G. W. McKinney, S. G. Mashnik, L. S. Waters, T. A. Wilcox, J. M. Verbeke. MCNPX 2.7.0 Extensions. Los Alamos National Laboratory Tech. Rep. LA-UR-11–02295. Los Alamos, NM, USA. (2011)10.2172/1058045 ↗
6. C. Jumpee, D. Wongsawaeng, J. Phys. Conf. Ser. 611, 1 (2015)10.1088/1742-6596/611/1/012019 ↗
7. P. Aim-O, D. Wongsawaeng, P. Phruksarojanakun, S. Tancharakorn, J. Phys. Conf. Ser. 860, 1 (2017)10.1088/1742-6596/860/1/012043 ↗
8. N. Mat Zali, H. Yazid, M.H.A.R. Meat Ahmad, I. Abdul Rahman, Y. Abdullah, Mater. Sci. Forum. 888, 179–183 (2017)10.4028/www.scientific.net/MSF.888.179 ↗
9. J. Saenpoowa, C. Ruksakulpiwat, C. Yenchai, C. Kobdaj, J. Phys. Conf. Ser. 2431, 012079 (2023)10.1088/1742-6596/2431/1/012079 ↗
10. D. Kramer, J. Zhang, R. Shimoi, E. Lehmann, A. Wokaun, K. Shinohara, G. Scherer, Electrochim. Acta 50, 2603–2614 (2005)10.1016/j.electacta.2004.11.005 ↗
11. J. Zhang, D. Kramer, R. Shimoi, Y. Ono, E. Lehmann, A. Wokaun, K. Shinohara, G. Scherer, Electrochim. Acta 51, 2715–2727 (2006)10.1016/j.electacta.2005.08.010 ↗
12. B. Thongnuanchan, R. Ninjan, E. Kalkornsurapranee, N. Lopattananon, C. Nakason, J. Polym. Environ. 26, 3069–3085 (2018)10.1007/s10924-018-1193-8 ↗
13. E. Kalkornsurapranee, W. Yung-Aoon, B. Thongnuanchan, A. Thitithammawong, C. Nakason, J. Johns, Adv. Polym. Technol. 37, 1478–1485 (2018)10.1002/adv.21806 ↗
14. J. Kruželák, R. Dosoudil, R. Sýkora, I. Hudec, Bull. Mater. Sci. 40, 223–231 (2017)10.1007/s12034-016-1347-z ↗
15. V. Jovanović, J.B. Simendic, S.S. Jovanovic, G. Marković, M.M. Cincović, Chem. Ind. Chem. Eng. Q. 15(4), 283–289 (2009)10.2298/CICEQ0904283J ↗
16. J. R. Lamarsh, A. J. Baratta, Introduction to Nuclear Engineering, 3d ed., Prentice-Hall, ISBN: 0–201–82498–1 (2001)