journal article·2021-09Open access

A universal etching method for synthesizing high-performance single crystal cathode materials

Xiaotu Ma, Panawan Vanaphuti, Jinzhao Fu, Jiahui Hou, Yangtao Liu, Ruihan Zhang, Sungyool Bong, Zeyi Yao, Zhenzhen Yang, Yan Wang

Nano Energy· Volume 87

Abstract

Abstract LiNixMnyCo1-x-yO2 (NMC) is considered the most appealing cathode material due to its high energy density and low cost. However, the stability and safety concerns, caused by the degradation of polycrystalline cathode materials during cycling, have restricted their practical applications. To overcome this shortcoming, converting polycrystalline cathode to high-performance single-crystal cathode materials becomes an appealing solution. Here, a universal etching approach is firstly developed to synthesize single-crystal cathode materials. The rate performance of the obtained single-crystal NMC111 is 10–15% more than that of polycrystalline NMC111 whereas the capacity retention of single-crystal NMC111 is enhanced by ~12% after 300 cycles at 0.5C. The obtained single-crystal NMC622 exhibits a pronounced improvement in rate performance, especially at high rates (~28.6% better at 5C and ~129% better at 10C) and has a comparable cycle performance compared to polycrystalline NMC622. Altogether, the findings propose an alternative approach to generate single-crystal particles with high energy density and cycle stability for the next generation lithium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. A review of Ni-based layered oxides for rechargeable Li-ion batteries10.1039/C6TA07991A ↗
2. High-nickel layered oxide cathodes for lithium-based automotive batteries10.1038/s41560-019-0513-0 ↗
3. Recycling end-of-life electric vehicle lithium-ion batteries10.1016/j.joule.2019.09.014 ↗
4. Single-crystal based studies for correlating the properties and high-voltage performance of Li[NixMnyCo1−x−y]O2 cathodes10.1039/C8TA10329A ↗
5. Single-crystal nickel-rich layered-oxide battery cathode materials: synthesis, electrochemistry, and intra-granular fracture10.1016/j.ensm.2020.01.027 ↗
6. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries10.1038/s41560-018-0191-3 ↗
7. Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries10.1016/j.nanoen.2020.104450 ↗
8. Prospect and reality of Ni-rich cathode for commercialization
9. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
10. Core–shell and concentration-gradient cathodes prepared via co-precipitation reaction for advanced lithium-ion batteries10.1039/C6TA10297B ↗
11. Surface/interfacial structure and chemistry of high-energy nickel-rich layered oxide cathodes: advances and perspectives10.1002/smll.201701802 ↗
12. Stabilization of a high-capacity and high-power nickel-based cathode for Li-ion batteries10.1016/j.chempr.2017.12.027 ↗
13. Recent progress in surface coating of layered LiNixCoyMnzO2 for lithium-ion batteries10.1016/j.materresbull.2017.05.021 ↗
14. Layered ternary metal oxides: performance degradation mechanisms as cathodes, and design strategies for high-performance batteries10.1016/j.pmatsci.2020.100655 ↗
15. A perspective on single-crystal layered oxide cathodes for lithium-ion batteries10.1016/j.ensm.2021.02.003 ↗
16. High-voltage “single-crystal” cathode materials for lithium-ion batteries10.1021/acs.energyfuels.0c03608 ↗
17. Adjunctive rufinamide in Lennox-Gastaut syndrome: a long-term, open-label extension study10.1111/j.1600-0404.2010.01334.x ↗
18. Optimized preparation of LiNi0.6Mn0.2Co0.2O2 with single crystal morphology cathode material for lithium-ion batteries10.1007/s11581-020-03445-4 ↗
19. Molybdate flux growth of idiomorphic Li(Ni1/3Co1/3Mn1/3)O2 single crystals and characterization of their capabilities as cathode materials for lithium-ion batteries10.1039/C6TA01593J ↗
20. Lithium nickel cobalt manganese oxide synthesized using alkali chloride flux: morphology and performance as a cathode material for lithium ion batteries10.1021/am300386j ↗
21. Implications of aqueous processing for high energy density cathode materials: Part II. Water-induced surface species on LiNi0.8Co0.15Al0.05O2
22. Study of the reactions between Ni-rich positive electrode materials and aqueous solutions and their relation to the failure of Li-ion cells10.1149/1945-7111/abb9cd ↗
23. Ultrafine LiNi1/3Co1/3Mn1/3O2 powders via an enhanced thermal decomposition solid state reaction10.1007/s10800-019-01313-2 ↗
24. Hydrogen peroxide assisted synthesis of LiNi1/3Co1/3Mn1/3O2 as high-performance cathode for lithium-ion batteries10.1016/j.jpowsour.2015.01.084 ↗
25. Preparation and electrochemical characterization of single-crystalline spherical LiNi1/3Co1/3Mn1/3O2 powders cathode material for Li-ion batteries10.1016/j.jpowsour.2009.11.007 ↗
26. Single-crystal LiNi0.6Co0.2Mn0.2O2 as high performance cathode materials for Li-ion batteries10.1016/j.jallcom.2016.03.061 ↗
27. Microscopically porous, interconnected single crystal LiNi1/3Co1/3Mn1/3O2 cathode material for Lithium ion batteries10.1039/c1jm00059d ↗
28. Chemical stability and long-term cell performance of low-cobalt, Ni-Rich cathodes prepared by aqueous processing for high-energy Li-Ion batteries10.1016/j.ensm.2019.08.020 ↗
29. Leaching process for recovering valuable metals from the LiNi1/3Co1/3Mn1/3O2 cathode of lithium-ion batteries10.1016/j.wasman.2017.02.011 ↗
30. Recovery of valuable metals from lithium-ion batteries NMC cathode waste materials by hydrometallurgical methods10.3390/met8050321 ↗
31. High-voltage cycling induced thermal vulnerability in LiCoO2 cathode: cation loss and oxygen release driven by oxygen vacancy migration10.1021/acsnano.0c02237 ↗
32. Interface cation migration kinetics induced oxygen release heterogeneity in layered lithium cathodes10.1016/j.ensm.2020.12.018 ↗
33. In Situ X-ray Diffraction Study of Layered Li–Ni–Mn–Co Oxides: Effect of Particle Size and Structural Stability of Core–Shell Materials10.1021/acs.chemmater.5b03500 ↗
34. Is Cobalt Needed in Ni-Rich Positive Electrode Materials for Lithium Ion Batteries?10.1149/2.1381902jes ↗
35. Characterization of yttrium substituted LiNi0.33Mn0.33Co0.33O2 cathode material for lithium secondary cells10.1016/j.electacta.2010.08.022 ↗
36. Microemulsion preparation and electrochemical characteristics of LiNi1/3Co1/3Mn1/3O2 powders10.1016/j.jpowsour.2008.12.036 ↗
37. Mg-doped Li1.133Ni0.2Co0.2Mn0.467O2 in Li site as high-performance cathode material for Li-ion batteries10.1016/j.ssi.2019.03.020 ↗
38. Facile and scalable fabrication of K+-doped Li1.2Ni0.2Co0.08Mn0.52O2 cathode with ultra high capacity and enhanced cycling stability for lithium ion batteries10.1016/j.ssi.2018.12.021 ↗
39. Sodium substitution for partial lithium to significantly enhance the cycling stability of Li 2 MnO 3 cathode material10.1016/j.jpowsour.2013.05.155 ↗
40. Chemical versus electrochemical electrolyte oxidation on NMC111, NMC622, NMC811, LNMO, and conductive carbon10.1021/acs.jpclett.7b01927 ↗
41. H.M. Pouran, Handbook of Environmental Materials Management, 2019, 1.10.1007/978-3-319-58538-3_95-2 ↗
42. Erratum: Borderud SP, Li Y, Burkhalter JE, Sheffer CE and Ostroff JS. Electronic cigarette use among patients with cancer: characteristics of electronic cigarette users and their smoking cessation outcomes. Cancer. doi: 10.1002/ cncr.2881110.1002/cncr.29118 ↗
43. Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application10.1039/C3EE42704H ↗
44. Hierarchical porous LiNi1/3Co1/3Mn1/3O2 nano-/micro spherical cathode material: minimized cation mixing and improved Li(+) mobility for enhanced electrochemical performance10.1038/srep25771 ↗
45. Nanoscaled lithium powders with protection of ionic liquid for highly stable rechargeable lithium metal batteries10.1002/advs.201901776 ↗
46. Preparation and characterization of lithium-rich ternary cathode materials using novel chelating agent and solvent10.1016/j.jallcom.2017.06.114 ↗
47. High-performance graphite recovered from spent lithium-ion batteries10.1021/acssuschemeng.9b05003 ↗
48. Hierarchical hollow microspheres assembled from N-doped carbon coated Li4Ti5O12 nanosheets with enhanced lithium storage properties10.1039/c3ta13860g ↗
49. Quantitative analysis of Ni2+/Ni3+ in Li[NixMnyCoz]O2 cathode materials: non-linear least-squares fitting of XPS spectra10.1016/j.apsusc.2018.02.114 ↗
50. Enhanced cyclability and safety performance of LiNi0.6Co0.2Mn0.2O2 at elevated temperature by AlPO4 modification10.1016/j.jallcom.2019.151834 ↗
51. Surface surgery of the nickel-rich cathode material LiNi0.815Co0.15Al0.035O2: toward a complete and ordered surface layered structure and better electrochemical properties10.1021/acsami.6b11431 ↗
52. Effect of flower-like Ni(OH)2 precursors on Li+/Ni2+ cation mixing and electrochemical performance of nickel-rich layered cathode10.1016/j.jallcom.2019.05.065 ↗