journal article·2024-09

Expediting layered oxide cathodes based on electronic structure engineering for sodium-ion batteries: Reversible phase transformation, abnormal structural regulation, and stable anionic redox

Xin-Yu Zhang, Hai-Yan Hu, Xin-Yu Liu, Jingqiang Wang, Yi-Feng Liu, Yan-Fang Zhu, Ling-Yi Kong, Zhuang-Chun Jian, Shu-Lei Chou, Yao Xiao

Nano Energy· Volume 128
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Biochar-based interfacial evaporation materials derived from lignosulfonate for efficient desalination10.1002/cnl2.79 ↗
2. A fully amorphous, dynamic cross-linked polymer electrolyte for lithium-sulfur batteries operating at subzero-temperatures
3. Bi-affinity electrolyte optimizing high-voltage lithium-rich manganese oxide battery via interface modulation strategy10.1002/anie.202304121 ↗
4. Prussian blue analogues for sodium-ion battery cathodes: a review of mechanistic insights, current challenges, and future pathways
5. Emerging electrolytes with fluorinated solvents for rechargeable lithium-based batteries10.1039/D2CS00873D ↗
6. Routes to high-performance layered oxide cathodes for sodium-ion batteries10.1039/D3CS00929G ↗
7. Long-life lithium-ion batteries realized by low-Ni, Co-free cathode chemistry10.1038/s41560-023-01267-y ↗
8. Defective oxygen inert phase stabilized high-voltage nickel-rich cathode for high-energy lithium-ion batteries10.1038/s41467-023-43792-0 ↗
9. Typical cathode materials for lithium-ion and sodium-ion batteries: from structural design to performance optimization10.1002/cnl2.62 ↗
10. One-step surface-to-bulk modification of high-voltage and long-life LiCoO2 cathode with concentration gradient architecture
11. Nonflammable polyfluorides-anchored quasi-solid electrolytes for ultra-safe anode-free lithium pouch cells without thermal runaway10.1002/adma.202304762 ↗
12. Opening a new horizon for the facile synthesis of long-life Ni-rich layered cathode10.1021/acsenergylett.3c01322 ↗
13. Bridging multiscale interfaces for developing ionically conductive high-voltage iron sulfate-containing sodium-based battery positive electrodes10.1038/s41467-023-39384-7 ↗
14. Slab gliding, a hidden factor that induces irreversibility and redox asymmetry of lithium-rich layered oxide cathodes10.1038/s41467-023-39838-y ↗
15. Stability of prismatic and octahedral coordination in layered oxides and sulfides intercalated with alkali and alkaline-earth metals10.1021/acs.chemmater.6b03454 ↗
16. Regulating cation interactions for zero-strain and high-voltage P2-type Na2/3Li1/6Co1/6Mn2/3O2 layered oxide cathodes of sodium-ion batteries10.1002/anie.202304628 ↗
17. High-entropy Co-Free O3-type layered oxyfluoride: a promising air-stable cathode for sodium-ion batteries10.1002/adma.202304440 ↗
18. A medium-entropy phosphate cathode with multielectron redox reaction for advanced sodium-ion batteries10.1002/aenm.202302046 ↗
19. Practical cathodes for sodium-ion batteries: who will take the crown10.1002/aenm.202301975 ↗
20. Extended "adsorption-insertion" model: a new insight into the sodium storage mechanism of hard carbons
21. Structural degradation mechanisms and modulation technologies of layered oxide cathodes for sodium-ion batteries10.1002/cnl2.7 ↗
22. Electrospun-technology-derived high-performance electrochemical energy storage devices10.1002/asia.201600809 ↗
23. Porous amorphous FePO4 nanoparticles connected by single-wall carbon nanotubes for sodium ion battery cathodes10.1021/nl302819f ↗
24. Layered oxide cathodes for sodium-ion batteries: from air stability, interface chemistry to phase transition10.1002/inf2.12422 ↗
25. Recent advances and prospects of cathode materials for sodium-ion batteries10.1002/adma.201501527 ↗
26. Routes to high energy cathodes of sodium-ion batteries10.1002/aenm.201501727 ↗
27. Low-cost polyanion-type sulfate cathode for sodium-ion battery10.1002/aenm.202101751 ↗
28. Enabling anionic redox stability of P2-Na5/6Li1/4Mn3/4O2 by Mg substitution
29. Hierarchical O3/P2 heterostructured cathode materials for advanced sodium-ion batteries10.1016/j.ensm.2022.02.043 ↗
30. Rapid synthesis of sodium-rich Prussian white for Sodium-ion battery via a bottom-up approach10.1016/j.cej.2020.126688 ↗
31. Prussian blue analogues with optimized crystal plane orientation and low crystal defects toward 450 Wh kg−1 alkali-ion batteries
32. A multicationic-substituted configurational entropy-enabled NASICON cathode for high-power sodium-ion batteries10.1016/j.nanoen.2024.109812 ↗
33. Layered oxide cathodes for sodium-ion batteries: microstructure design, local chemistry and structural unit10.1007/s11426-022-1550-2 ↗
34. Asynchronous domain dynamics and equilibration in layered oxide battery cathode10.1038/s41467-023-44222-x ↗
35. An abnormal 3.7 Volt O3-type sodium-ion battery cathode10.1002/anie.201804130 ↗
36. A practical high-energy cathode for sodium-ion batteries based on uniform P2-Na0.7CoO2 microspheres10.1002/anie.201702024 ↗
37. A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries10.1039/C4EE03192J ↗
38. High-voltage performance of P2-NaxMn0.5Co0.5O2 layered cathode material10.1002/er.7504 ↗
39. Surface chemistry engineering of layered oxide cathodes for sodium-ion batteries10.1002/cnl2.19 ↗
40. P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries10.1038/nmat3309 ↗
41. Amorphous aluminum oxide-coated NaFe0.33Ni0.33Mn0.33O2 cathode materials: enhancing interface charge transfer for high-performance sodium-ion batteries10.1021/acsami.3c09242 ↗
42. Recent advances and prospects of layered transition metal oxide cathodes for sodium-ion batteries10.1016/j.ensm.2020.04.040 ↗
43. Structural insights into the dynamic and controlled multiphase evolution of layered-spinel heterostructured sodium oxide cathode
44. Surface lattice-matched engineering based on in situ spinel interfacial reconstruction for stable heterostructured sodium layered oxide cathodes
45. Strain engineering by atomic lattice locking in P2-type layered oxide cathode for high-voltage sodium-ion batteries10.1016/j.nanoen.2020.105061 ↗
46. Surface engineering suppresses the failure of biphasic sodium layered cathode for high performance sodium-ion batteries10.1002/adfm.202109319 ↗
47. Facilitating layered oxide cathodes based on orbital hybridization for sodium-ion batteries: marvelous air stability, controllable high voltage, and anion redox chemistry10.1002/adma.202307938 ↗
48. egative Lattice Expansion in an O3-Type Transition-Metal Oxide Cathode for Highly Stable Sodium-Ion Batterie
49. A universal strategy based on bridging microstructure engineering and local electronic structure manipulation for high-performance sodium layered oxide cathodes10.1021/acsnano.3c03819 ↗
50. Suppression of monoclinic phase transitions of O3-type cathodes based on electronic delocalization for Na-Ion batteries10.1021/acsami.9b00186 ↗
51. P2-Na0.67AlxMn1-xO2: cost-effective, stable and high-rate sodium electrodes by suppressing phase transitions and enhancing sodium cation mobility10.1002/anie.201911698 ↗
52. Advanced P2-Na2/3Ni1/3Mn7/12Fe1/12O2 cathode material with suppressed P2–O2 phase transition toward high-performance sodium-ion battery10.1021/acsami.8b12204 ↗
53. High voltage Mg-doped Na0.67Ni0.3–xMgxMn0.7O2 (x = 0.05, 0.1) Na-ion cathodes with enhanced stability and rate capability10.1021/acs.chemmater.6b01935 ↗
54. P2-type Na2/3Ni1/3Mn2/3−xTixO2 as a new positive electrode for higher energy Na-ion batteries10.1039/C3CC49856E ↗
55. P2–Na2/3Ni1/3Mn5/9Al1/9O2 microparticles as superior cathode material for sodium-ion batteries: enhanced properties and mechanism via graphene connection10.1021/acsami.6b03944 ↗
56. Earth-abundant Na-Mg-Fe-Mn-O cathode with reversible hybrid anionic and cationic redox10.1002/aenm.202300746 ↗
57. Sodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries10.1039/D0EE02997A ↗
58. New insights into designing high-rate performance cathode materials for sodium ion batteries by enlarging the slab-spacing of the Na-ion diffusion layer10.1039/C5TA10589G ↗
59. Prototype sodium-ion batteries using an air-stable and Co/Ni-Free O3-layered metal oxide cathode10.1002/adma.201502449 ↗
60. High voltage Mg-doped Na0.67Ni0.3-xMgxMn0.7O2 (x=0.05, 0.1) Na-Ion cathodes with enhanced stability and rate capability10.1021/acs.chemmater.6b01935 ↗
61. Electrochemical properties of monoclinic NaNiO210.1149/2.023302jes ↗
62. P2-type Na0.66Ni0.33–xZnxMn0.67O2 as new high-voltage cathode materials for sodium-ion batteries10.1016/j.jpowsour.2014.12.083 ↗
63. Spirobifluorene mediating the spin–spin coupling of nitronyl nitroxide diradicals10.1021/acs.jpca.2c06648 ↗
64. Vitalization of P2–Na2/3Ni1/3Mn2/3O2 at high-voltage cyclability via combined structural modulation for sodium-ion batteries10.1016/j.ensm.2020.04.012 ↗
65. A chemical approach to raise cell voltage and suppress phase transition in O3 sodium layered oxide electrodes10.1002/aenm.201702599 ↗
66. A NaNi0.5Mn0.5SnxO2 cathode with anti-structural deformation enhancing long lifespan and super power for a sodium ion battery10.1039/D0CC02168G ↗
67. P2-type moisture-stable and high-voltage-tolerable cathodes for high-energy and long-life sodium-ion batteries10.1021/acs.nanolett.2c04465 ↗
68. Enhanced cycling stability of O3-type Na[Ni0.5Mn0.5]O2 cathode through Sn addition for sodium-ion batteries10.1021/acs.jpcc.1c00522 ↗
69. High-voltage stabilization of O3-type layered oxide for sodium-ion batteries by simultaneous tin dual modification10.1021/acs.chemmater.2c00522 ↗
70. An abnormal 3.7 volt O3-type sodium-ion battery cathode10.1002/anie.201804130 ↗
71. Triple effects of Sn-substitution on Na0.67Ni0.33Mn0.67O210.1016/j.jmst.2019.01.010 ↗
72. A P2/O3 biphasic cathode material with highly reversibility synthesized by Sn-substitution for Na-ion batteries10.1016/j.electacta.2019.06.020 ↗
73. Formulating high-rate and long-cycle heterostructured layered oxide cathodes by local chemistry and orbital hybridization modulation for sodium-ion batteries10.1002/adma.202202695 ↗
74. Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries10.1038/s41560-018-0097-0 ↗
75. New insights into the critical role of inactive element substitution in improving the rate performance of sodium oxide cathode material
76. Anionic redox reaction in Na-deficient layered oxide cathodes: role of Sn/Zr substituents and in-depth local structural transformation revealed by solid-state NMR
77. Simultaneous reduction of Co3+ and Mn4+ in P2-Na2/3Co2/3Mn1/3O2 As evidenced by X-ray absorption spectroscopy during electrochemical sodium intercalation10.1021/cm403597h ↗
78. Layered oxides as positive electrode materials for Na-ion batteries10.1557/mrs.2014.85 ↗
79. A new variety of LiCoO2 with an unusual oxygen packing obtained by exchange reaction10.1016/0025-5408(82)90192-1 ↗
80. An advanced cathode for Na-ion batteries with high rate and excellent structural stability10.1039/c2cp44467d ↗
81. Deciphering the origin of high electrochemical performance in a novel Ti-substituted P2/O3 biphasic cathode for sodium-ion batteries10.1021/acsami.0c11427 ↗
82. Interlocking biphasic chemistry for high-voltage P2/O3 sodium layered oxide cathode10.1016/j.ensm.2022.06.012 ↗
83. First-principles calculations on LixNiO2: phase stability and monoclinic distortion10.1016/S0378-7753(03)00199-X ↗
84. Direct visualization of the Jahn-Teller effect coupled to Na ordering in Na5/8MnO210.1038/nmat3964 ↗
85. Electrochemical properties and structural evolution of O3-type layered sodium mixed transition metal oxides with trivalent nickel10.1039/C6TA09220A ↗
86. Water-stable cathode for high rate Na-Ion batteries10.1021/acsami.0c00386 ↗
87. Ti-substituted NaNi0.5Mn0.5-xTixO2 cathodes with reversible O3−P3 phase transition for high-performance sodium-ion batteries
88. Reaching the energy density limit of layered O3-NaNi0.5Mn0.5O2 electrodes via dual Cu and Ti substitution10.1002/aenm.201901785 ↗
89. Improved electrochemical performance of Fe-substituted NaNi0.5Mn0.5O2 cathode materials for sodium-ion batteries10.1021/acsami.5b00594 ↗
90. Environmentally stable interface of layered oxide cathodes for sodium-ion batteries10.1038/s41467-017-00157-8 ↗
91. The effects of the functional electrolyte additive on the cathode material Na0.76Ni0.3Fe0.4Mn0.3O2 for sodium-ion batteries10.1016/j.electacta.2018.05.185 ↗
92. P2-Na0.6[Cr0.6Ti0.4]O2 cation-disordered electrode for high-rate symmetric rechargeable sodium-ion batteries10.1038/ncomms7954 ↗
93. Designing air-stable O3-type cathode materials by combined structure modulation for Na-ion batteries10.1021/jacs.7b05176 ↗
94. Layered oxide cathodes for sodium-ion batteries: phase transition, air stability, and performance
95. Layered Na-Ion cathodes with outstanding performance resulting from the synergetic effect of mixed P- and O-type phases10.1002/aenm.201501555 ↗
96. Insights into layered–tunnel dynamic structural evolution based on local coordination chemistry regulation for high-energy-density and long-cycle-life sodium-ion oxide cathodes10.1002/inf2.12475 ↗
97. Insights into diffusion mechanisms in P2 layered oxide materials by first-principles calculations10.1021/cm501563f ↗
98. Dynamic structural evolution and controllable redox potential for abnormal high-voltage sodium layered oxide cathodes
99. Atomic insights into the Cu species supported on zeolite for direct oxidation of methane to methanol via low-damage HAADF-STEM10.1002/adma.202208504 ↗
100. The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials10.1038/nchem.2524 ↗