Thirty-minute synthesis of hierarchically ordered sulfur particles enables high-energy, flexible lithium-sulfur batteries
Source abstract
Abstract
An innovative lithium-sulfur (Li-S) battery technology is proposed that provides high energy density, fast charging, and mechanical flexibility. Via the rapid (30 min) one-pot reaction of elemental sulfur and vinyl phosphonic acid (VPA), SVPA microparticles containing dissimilar sulfur allotropes were developed. The spontaneous formation of wrinkles and pores on the particles facilitates electrolyte access and alleviates mechanical stress during battery cycling. The large surface area created by the ordered sulfur domains enhances lithium diffusion coefficients and facilitates polysulfide conversion kinetics in the Li-S cells, leading to a high discharge capacity of 1529 mAh·g−1 at 0.05 C and excellent rate performance (721 mAh·g−1 at 7 C). Additionally, owing to the inherent electrode porosity imparted by SVPA microparticles, a high areal capacity of ~5 mAh·cm−2 is obtained at increased cathode loadings. Abundant phosphonate moieties at the surfaces and interfaces of particles act as effective chemical anchors for lithium polysulfides, thereby mitigating the shuttle effects, which can prolong cycle lives at various C rates. The impressive properties of the SVPA microparticles are demonstrated for Li-S pouch cells, which exhibit stable operation under various deformations and highlight the SVPA microparticles as a promising candidate for next-generation Li-S batteries for wearable electronics
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Synthesis and properties of polymers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Li–O 2 and Li–S batteries with high energy storage10.1038/nmat3191 ↗
2. Challenges and opportunities towards fast-charging battery materials10.1038/s41560-019-0405-3 ↗
3. Propelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries10.1016/j.nanoen.2017.01.040 ↗
4. Aligned carbon nanotube/sulfur composite cathodes with high sulfur content for lithium–sulfur batteries10.1016/j.nanoen.2013.12.013 ↗
5. Reduced graphene oxide wrapped MOFs-derived cobalt-doped porous carbon polyhedrons as sulfur immobilizers as cathodes for high performance lithium sulfur batteries10.1016/j.nanoen.2016.02.049 ↗
6. Single-wall carbon nanotube network enabled ultrahigh sulfur-content electrodes for high-performance lithium-sulfur batteries10.1016/j.nanoen.2017.10.053 ↗
7. Entrapment of sulfur in hierarchical porous graphene for lithium–sulfur batteries with high rate performance from− 40 to 60° C10.1016/j.nanoen.2012.10.003 ↗
8. Double-oxide sulfur host for advanced lithium-sulfur batteries10.1016/j.nanoen.2017.05.041 ↗
9. Efficient synergism of electrocatalysis and physical confinement leading to durable high-power lithium-sulfur batteries10.1016/j.nanoen.2018.12.019 ↗
10. Hierarchical carbon nanocages confining high-loading sulfur for high-rate lithium–sulfur batteries10.1016/j.nanoen.2015.01.033 ↗
11. A sulfur-rich copolymer@ CNT hybrid cathode with dual-confinement of polysulfides for high-performance lithium–sulfur batteries
12. Advances in polar materials for lithium–sulfur batteries
13. Combined high catalytic activity and efficient polar tubular nanostructure in urchin-like metallic NiCo2Se4 for high-performance lithium–sulfur batteries
14. Recent advances in heterostructure engineering for lithium–sulfur batteries10.1002/aenm.202003689 ↗
15. Adsorption-catalysis design in the lithium-sulfur battery
16. Catalytic oxidation of Li2S on the surface of metal sulfides for Li− S batteries10.1073/pnas.1615837114 ↗
17. Single-atom catalysis enables long-life, high-energy lithium-sulfur batteries10.1007/s12274-020-2827-4 ↗
18. Theoretical calculation guided design of single-atom catalysts toward fast kinetic and long-life Li–S batteries10.1021/acs.nanolett.9b04719 ↗
19. Cobalt in nitrogen-doped graphene as single-atom catalyst for high-sulfur content lithium–sulfur batteries10.1021/jacs.8b12973 ↗
20. Tungsten disulfide catalysts supported on a carbon cloth interlayer for high performance Li–S battery10.1002/aenm.201602567 ↗
21. Encapsulated monoclinic sulfur for stable cycling of Li–S rechargeable batteries10.1002/adma.201303166 ↗
22. A high-energy and long-cycling lithium-sulfur pouch cell via a macroporous catalytic cathode with double-end binding sites10.1038/s41565-020-00797-w ↗
23. Interphases in lithium–sulfur batteries: toward deployable devices with competitive energy density and stability10.1021/acsenergylett.8b01001 ↗
24. Insight into lithium–metal anodes in lithium–sulfur batteries with a fluorinated ether electrolyte10.1039/C5TA03195H ↗
25. Tuning the electrolyte network structure to invoke quasi-solid state sulfur conversion and suppress lithium dendrite formation in Li–S batteries10.1038/s41560-018-0214-0 ↗
26. The use of elemental sulfur as an alternative feedstock for polymeric materials10.1038/nchem.1624 ↗
27. Kilogram scale inverse vulcanization of elemental sulfur to prepare high capacity polymer electrodes for Li-S batteries10.1002/pola.27314 ↗
28. Inverse vulcanization of elemental sulfur to prepare polymeric electrode materials for Li–S batteries10.1021/mz400649w ↗
29. Inverse vulcanization of elemental sulfur and styrene for polymeric cathodes in Li-S batteries10.1002/pola.28266 ↗
30. Electrochemical lithiation of covalently bonded sulfur in vulcanized polyisoprene10.1021/acsenergylett.6b00073 ↗
31. A sulfur–limonene-based electrode for lithium–sulfur batteries: high-performance by self-protection
32. Sulfur‐rich polymers with functional linkers for high-capacity and fast-charging lithium–sulfur batteries
33. A highly crosslinked and conductive sulfur-rich copolymer with grafted polyaniline for stable cycling lithium–sulfur batteries10.1149/1945-7111/ab6bc0 ↗
34. Copolymerization of polythiophene and sulfur to improve the electrochemical performance in lithium–sulfur batteries10.1021/acs.chemmater.5b02317 ↗
35. Immobilization of sulfur in microgels for lithium–sulfur battery10.1039/C6CC00489J ↗
36. Elemental-sulfur-mediated facile synthesis of a covalent triazine framework for high-performance lithium-sulfur batteries10.1002/anie.201511553 ↗
37. Perfluoroaryl-elemental sulfur SNAr chemistry in covalent triazine frameworks with high sulfur contents for lithium–sulfur batteries10.1002/adfm.201703947 ↗
38. Covalent triazine frameworks incorporating charged polypyrrole channels for high-performance lithium–sulfur batteries10.1021/acs.chemmater.0c00246 ↗
39. Synthesis of three-dimensionally interconnected sulfur-rich polymers for cathode materials of high-rate lithium–sulfur batteries10.1038/ncomms8278 ↗
40. Low cost and renewable sulfur-polymers by inverse vulcanisation, and their potential for mercury capture10.1039/C6TA09862B ↗
41. The rheology of liquid elemental sulfur across the λ-transition10.1122/1.5001523 ↗
42. Aqueous “polysulfide-ene” polymerization for sulfur-rich nanoparticles and their use in heavy metal ion remediation10.1039/C8TA05457F ↗
43. High sulfur content polymer nanoparticles obtained from interfacial polymerization of sodium polysulfide and 1,2,3-trichloropropane in water10.1002/marc.201500006 ↗
44. Synthesis and characterization of polypyrrole-coated sulfur-rich latex particles: new synthetic mimics for sulfur-based micrometeorites10.1021/cm0601741 ↗
45. Sustainable inverse-vulcanised sulfur polymers10.1039/C8RA04446E ↗
46. In-situ observation of the formation of fibrous sulfur under high pressure10.1021/acs.jpcc.9b04180 ↗
47. A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries10.1038/nmat2460 ↗
48. Improving the performance of lithium–sulfur batteries by graphene coating10.1016/j.jpowsour.2013.05.050 ↗
49. A fundamental look at electrocatalytic sulfur reduction reaction10.1038/s41929-020-0498-x ↗
50. Enabling high-energy-density cathode for lithium–sulfur batteries10.1021/acsami.8b05166 ↗
51. Inverse vulcanization of elemental sulfur with 1,4-diphenylbutadiyne for cathode materials in Li–S batteries10.1039/C5RA01188D ↗
52. Fluorinated covalent organic polymers for high performance sulfur cathodes in lithium–sulfur batteries10.1021/acs.chemmater.9b01986 ↗
53. Sulfur-rich polymeric materials with semi-interpenetrating network structure as a novel lithium–sulfur cathode10.1039/c4ta00779d ↗
54. Rational sulfur cathode design for lithium–sulfur batteries: sulfur-embedded benzoxazine polymers10.1021/acsenergylett.6b00245 ↗
55. Ultra-microporous carbons encapsulate small sulfur molecules for high performance lithium-sulfur battery10.1016/j.nanoen.2017.01.060 ↗
56. Flexible and stable high-energy lithium-sulfur full batteries with only 100% oversized lithium10.1038/s41467-018-06879-7 ↗
57. Self-supported and flexible sulfur cathode enabled via synergistic confinement for high-energy-density lithium–sulfur batteries
58. Infiltrated porous polymer sheets as free-standing flexible lithium-sulfur battery electrodes10.1002/adma.201600757 ↗