journal article·2023-03

A pendulum-based absorber-harvester with an embedded hybrid vibro-impact electromagnetic-dielectric generator

Cailiang Zhang, Junchen Xu, Shitong Fang, Zijian Qiao, Daniil Yurchenko, Zhihui Lai

Nano Energy· Volume 107
Publisher page

Abstract

In this paper, a novel hybrid vibro-impact electromagnetic-dielectric generator (VI EDG) is proposed, which is further embedded into a pendulum structure to form a pendulum-based absorber-harvester (PAH) system. The PAH system can convert the vibration energy into electrical one with the help of the VI EDG, and has the potential to reduce the swing amplitude of the pendulum. The physical model of the PAH system is first introduced, and its governing equations involving the dynamical and electrical parts are derived based on the Euler-Lagrange’s equation of a non-conservative system. Next, the governing equations of the PAH system are validated experimentally by measuring the swing motion of the pendulum under a given harmonic excitation. On this basis, the system energy harvesting performance under different excitation parameters (amplitude and frequency) and dimensional parameters (the rod’s length and the distance between two dielectric elastomer membranes) is fully investigated and explained through numerical simulations. Finally, the vibration absorption performance of the VI EDG is discussed by comparing the peak-to-peak values of the swing motions between the proposed PAH system and the conventional pendulum without embedded VI EDG. Research results show that the proposed VI EDG can not only effectively harvest ambient vibration energy from the pendulum system, but also has the potential to absorb the vibration of the system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative Energy Harvesting Technologies · Vibration Control and Rheological Fluids · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Energy harvesting from pendulum oscillations10.1016/j.ijnonlinmec.2017.03.022 ↗
2. Multi-directional energy harvesting by piezoelectric cantilever-pendulum with internal resonance10.1063/1.4936607 ↗
3. Modeling and analysis of piezoelectric cantilever-pendulum system for multi-directional energy harvesting10.1177/1045389X16642302 ↗
4. A piezoelectric spring pendulum oscillator used for multi-directional and ultra-low frequency vibration energy harvesting10.1016/j.apenergy.2018.09.082 ↗
5. Harvesting weak vibration energy by integrating piezoelectric inverted beam and pendulum10.1016/j.energy.2021.120374 ↗
6. Parametric pendulum based wave energy converter10.1016/j.ymssp.2017.06.026 ↗
7. Improving energy harvesting by internal resonance in a spring-pendulum system10.1007/s10409-020-00945-4 ↗
8. Pendulum-based embedded energy harvester for rotating systems10.1016/j.ymssp.2022.109415 ↗
9. Wind power harvester based on an aerodynamic double pendulum10.1177/09544062221085483 ↗
10. Energy harvesting from chaos in base excited double pendulum10.1016/j.ymssp.2019.01.037 ↗
11. Improving efficiency of piezoelectric based energy harvesting from human motions using double pendulum system10.1016/j.enconman.2019.02.001 ↗
12. Oscillation control of a pendulum structure using an inverted pendulum-type tuned mass damper
13. Normal-force dependant friction in centrifugal pendulum vibration absorbers: Simulation and experimental investigations10.1016/j.jsv.2020.115815 ↗
14. Vibration reduction of multi-parametric excited spring pendulum via a transversally tuned absorber10.1007/s11071-009-9635-4 ↗
15. Bi-directional vibration control of offshore wind turbines using a 3D pendulum tuned mass damper10.1016/j.ymssp.2017.12.011 ↗
16. Effective and robust rocking centrifugal pendulum vibration absorbers10.1016/j.jsv.2022.116821 ↗
17. Nonlinear vibration mitigation of a crane’s payload using pendulum absorber10.1016/j.ymssp.2020.107558 ↗
18. Vibration attenuation in wind turbines: A proposed robust pendulum pounding TMD10.1016/j.engstruct.2021.111891 ↗
19. Design and analysis of a collocated periodic vibration absorber-harvester10.1016/j.ijmecsci.2018.09.009 ↗
20. Parametric study and optimization of linear and nonlinear vibration absorbers combined with piezoelectric energy harvester10.1016/j.ijmecsci.2018.12.053 ↗
21. Nonlinear multi-modal energy harvester and vibration absorber using magnetic softening spring10.1016/j.jsv.2020.115332 ↗
22. Energy harvesting using a novel autoparametric pendulum absorber-harvester10.1016/j.jsv.2021.116014 ↗
23. Simultaneous vibration mitigation and energy harvesting from a pendulum-type absorber10.1016/j.cnsns.2020.105479 ↗
24. Energy recovery from a pendulum tuned mass damper with two independent harvesting sources10.1016/j.ijmecsci.2020.105568 ↗
25. Assessment of energy harvesting and vibration mitigation of a pendulum dynamic absorber10.1016/j.ymssp.2017.12.028 ↗
26. Energy harvesting from a novel contact-type dielectric elastomer generator10.1016/j.enconman.2019.112351 ↗
27. Self-powered and self-sensing devices based on human motion10.1016/j.joule.2022.06.013 ↗
28. H. Dielectric elastomer generators that stack up10.1088/0964-1726/24/1/015014 ↗
29. Modeling and experimental investigation of a novel bistable two-degree-of-freedom electromagnetic energy harvester10.1016/j.ymssp.2021.107608 ↗
30. A nonlinear two-degree-of-freedom electromagnetic energy harvester for ultra-low frequency vibrations and human body motions10.1016/j.renene.2019.01.105 ↗
31. Modeling and analysis of magnetic spring enhanced lever-type electromagnetic energy harvesters10.1007/s10483-022-2849-9 ↗
32. Characterizing nonlinear characteristics of asymmetric tristable energy harvesters10.1016/j.ymssp.2021.108612 ↗
33. Nonlinear dynamic analysis of asymmetric tristable energy harvesters for enhanced energy harvesting10.1016/j.cnsns.2018.02.017 ↗
34. Resonance Mechanism of Nonlinear Vibrational Multistable Energy Harvesters under Narrow-Band Stochastic Parametric Excitations10.1155/2019/1050143 ↗
35. Development of a novel non-contact piezoelectric wind energy harvester excited by vortex-induced vibration10.1016/j.enconman.2021.113980 ↗
36. Global optimisation approach for designing high-efficiency piezoelectric beam-based energy harvesting devices10.1016/j.nanoen.2021.106684 ↗
37. Predicting energy harvesting performance of a random nonlinear dielectric elastomer pendulum10.1016/j.apenergy.2021.116696 ↗
38. Energy harvesting from biting force with thin sheet harvester based on electret and dielectric elastomer10.1016/j.nanoen.2022.107357 ↗
39. Parallelogram-shaped dielectric elastomer generators: Analytical model and experimental validation10.1177/1045389X14563861 ↗
40. Energy harvesting from a DE-based soft pendulum. Smart
41. On energy harvesting from a vibro-impact oscillator with dielectric membranes10.1016/j.ymssp.2018.01.025 ↗
42. A hybrid piezo-dielectric wind energy harvester for high-performance vortex-induced vibration energy harvesting10.1016/j.ymssp.2020.107212 ↗
43. Energy harvesting from a DE-based dynamic vibro-impact system10.1088/1361-665X/aa8285 ↗
44. Energy harvesting from a dynamic vibro-impact dielectric elastomer generator subjected to rotational excitations10.1007/s11071-020-05988-7 ↗
45. Wind energy harvesting from a conventional turbine structure with an embedded vibro-impact dielectric elastomer generator10.1016/j.jsv.2020.115616 ↗
46. Harvest wind energy from a vibro-impact DEG embedded into a bluff body10.1016/j.enconman.2019.111993 ↗
47. Application of nonlinear magnetic vibro-impact vibration suppressor and energy harvester10.1016/j.ymssp.2017.05.010 ↗
48. Potential of a vibro-impact nonlinear energy sink for energy harvesting10.1016/j.ymssp.2021.107827 ↗
49. Experimental investigations of a vibro-impact absorber attached to a continuous structure10.1016/j.ymssp.2022.109382 ↗
50. Effectiveness and nonlinear characterization of vibro-impact energy harvesting absorbers in controlling base-excited systems10.1088/1361-665X/ac1b16 ↗
51. Dynamics of an electromagnetic vibro-impact nonlinear energy sink, applications in energy harvesting and vibration absorption10.1007/s11071-022-07253-5 ↗
52. Effective design of vibro-impact energy harvesting absorbers with asymmetric stoppers10.1140/epjs/s11734-022-00495-9 ↗
53. Dynamics of a hybrid vibro-impact nonlinear energy sink
54. Advantages of nonlinear energy harvesting with dielectric elastomers10.1016/j.jsv.2018.10.066 ↗
55. Optimizing the electrical energy conversion cycle of dielectric elastomer generators10.1002/adma.201402291 ↗
56. A state-of-the-art review on low-frequency nonlinear vibration isolation with electromagnetic mechanisms10.1007/s10483-022-2868-5 ↗
57. Investigation on the Impact-Based Energy Conversion of a Dielectric Elastomer Membrane10.1109/ACCESS.2020.3027817 ↗
58. Energy harvesting from a DE-based soft pendulum10.1088/1361-665X/aae54c ↗